Used label systems for sale (135)

Condition: used, Year of construction: 1988, - Processing - 4 printing units (letterpress) Bdjdpfxozq U U Io Am Tsf - UV coating - Die-cutting - Winding

Condition: used, The Lemorau CT 1500 is a manual core cutter. It offers quick and easy conversion for various core diameters and wall thicknesses. The CT 1500 is very easy to operate: after the core has been slid onto the mandrel, the operator adjusts the end stop, which determines the width of the core cuts. The operator then presses the start button, lowers the knife using the handle, and cuts the core. - Maximum core length up to 1500 mm (59”) Bdedpfx Aezq U Uzsm Tef - Standard core diameters 25, 40, 50, 76 mm (1”, 1.57”, 2”, 3”) - Other sizes up to 152 mm (up to 6”) available as an option - Maximum measured cutting length 330 mm (13”) - Maximum wall thickness 6 mm (0.23”) for cardboard - Two-hand operation for operator safety

Condition: used, The GM PN100S model is an automatic core cutter for cores with a maximum length of 100 cm. Bsdpfxszq U Uns Am Todf The device is operated via a touch display. Max. wall thickness: 10 mm Core inner diameter: 25 mm (1") - 120 mm (4.7")

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Bdodpfxszq U Syj Am Tjf Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets Bdedpfszqnxtjx Am Tjf

Condition: used, Small character inkjet printer Bdedpfeb A H Ivex Am Tof -Machine: has not been checked and is sold as a spare parts carrier -Dimensions: 500/600/H1750 mm -Weight: 40 kg

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Bdjdpfet D E Aisx Am Tef Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Year of construction: 2001, condition: used, functionality: fully functional, - Web Width: 510 mm - Functions: Bdsdpfxow Edbce Am Tsf - Slitting - Rewinding - Rewind Diameter: Up to 700 mm - Unwind Diameter: Up to 750 mm - Core Sizes: 3" - Slitting System: Scissor - Web Path: Roll-to-roll - Counting Options: Label and length counting - Web Guiding System: Included

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Bjdpfjzkucfox Am Tjdf Errors and prior sale excepted.

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit Bdsdjznwqgspfx Am Tsf • Operator Platform _____ Main Advantages ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Condition: good (used), Year of construction: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) Bdsdpfx Aoznun Ajm Tef _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting, and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons, and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows for efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec • Cutting accuracy: ± 0.3 mm • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut, and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard, and mouse • Cutting and control software • Permanent transferable software license • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut, and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power • Demonstration possible by appointment _____

Year of construction: 1995, condition: good (used), Max. roll diameter, unwinder: 700 mm (Shaft 76) Max. roll diameter, rewinder: 450 mm Max. web width: Bsdezn Azwepfx Am Tedf 330 mm Max. speed: 220 m/min Description: Unwinder, splicing table, web guiding system, cutting unit, rewinder, counters (labels or meters), missing label detection with visual inspection.

Year of construction: 1998, condition: excellent (used), Max. roll diameter unwinder: 750 mm (Shaft 76) Max. roll diameter rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufactured by: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are slim; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm Bdjdezn Ayyepfx Am Tef 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x razor blades

Year of construction: 2021, condition: ready for operation (used), A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible. Bedozlt Rkspfx Am Tsdf

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Bdodpfxezk Nb Ae Am Tsf

Condition: used, A Heidelberg cylinder press (OHT) has been converted and equipped with a die-cutting unit from PRACMATIC for printing labels on rolls. Bdjdpozgi Tdsfx Am Tsf

Condition: good (used), Year of construction: 2014, Approx. 4 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: only €2,950.00 (net)! Bsdpfx Aezbylbom Tjdf Manufacturer: Weber Type: Alpha Compact Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm Bdjdpfxszka T As Am Tjf • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition Bdedpfx Aszkavdem Tef The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: good (used), Year of construction: 2019, functionality: fully functional, Manufacturer: Grafisk Maskinfabrik A/S, Denmark Model: GM DC330 V8-BX Designation: Converting Line Year of manufacture: 2019 Material width: 333 mm Max. speed: approx. 50 m/min Voltage: 3 x 400 V + N + PE Max. load: 32 A Frequency: 50/60 Hz CE conformity: Yes Location: Germany Availability: End of September 2026 Main configuration: • Unwinding unit, 3" core / 76 mm • Web guiding system • Flexo printing / varnishing unit • Lamination unit • Cold foil application • GEW UV curing unit • Pre-heating unit for toner / reduction of toner cracking • Semi-rotary die-cutting unit with Kocher & Beck GAP function • Approx. 25" magnetic cylinder system, usable format approx. 22" • Matrix rewinding • Back scoring • Slitting unit with shear knives • Two rewinding shafts, 3" • Touchscreen control • Suitable for offline roll-to-roll production Bdjdpfx Amezkarro Tjf Additional equipment: GM Buffer • Condition: Visual condition: 8/10 Technical condition: 8/10 The machine is currently still in operation and can be inspected while running. Based on the available photos and information, the machine appears to be in good, clean, and well-maintained condition. A final technical inspection and test run are recommended before purchase.

Condition: excellent (used), For sale is a LINX 6900 P690 inkjet printer from the renowned British manufacturer, LINX Printing Technologies. This is a professional industrial printer utilizing Continuous Ink Jet (CIJ) technology, designed for fast product marking on production lines. The device enables the application of production dates, expiry dates, batch numbers (LOT), serial numbers, codes, and other markings on various types of packaging and products. Technical data: Manufacturer: LINX Printing Technologies plc Model: 6900 P690 Year of manufacture: 2008 Serial number: EM060 Printing technology: Continuous Ink Jet (CIJ) Power supply: 100–230 V AC, 50/60 Hz Built-in LCD display Alphanumeric keyboard RS-232 interface Inputs for encoder (Primary / Secondary Shaft Encoder) Alarm output Stainless steel housing Application: The printer is used in many industries, including: food industry, cosmetics industry, pharmaceutical industry, chemical industry, manufacturing, packaging industry. It enables printing, among other things: production dates, expiry dates, batch numbers (LOT), serial numbers, identification codes, text and markings on products. Bodpfx Amsziwvxs Tsdf Condition: The device is used and is in good visual condition. Normal signs of wear and tear resulting from use are visible.

Year of construction: 1995, condition: used, Labelling machine with two gluing units for wet-glue labelling of paper neck, chest and back labels onto glass bottles. Additional title: Cold glue labeling Capacity filling line: 12000 bo/h Bedpfxszg I Ite Am Tsdf Current: 12 A Voltage: 400 V Frequency: 50 Hz Formats: 0.5 l Euro, NRW; 0.33 l Giesinger – body, chest and back labels Running direction: links -> rechts Base construction: Carousel-type machine Features: 2 gluing units, protective housing with doors, glue pumps

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Bdodoziatgopfx Am Tof Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Year of construction: 2021, condition: good (used), CARTES CE 162 HH - Machine Series: CE160 - Year of Manufacture: 2021 - Serial Number: 216359 Technical Specifications Input and Unwinding Unit: - Integrated unwinder with web tension control - Overprinting photocell for precise register alignment Hot Foil Embossing Stations: - First station: Hot foil stamping unit with transverse foil feed - Second station: Hot foil stamping unit with transverse foil feed Cutting and Processing: - Ultrasonic cutting unit for resin-free textile labels - Maximum web width: 80 mm - Independent cutting mode enabling cuts after each print or every 2nd, 3rd, 4th, or 5th cycle Control and Operation: - Integrated silk screen printing unit (SN 161) - Touchscreen interface for intuitive machine control Drying and Accessories: - Infrared drying oven suitable for conventional and specialty screen printing inks - Overprinting photocell for register accuracy Additional Equipment: - Longitudinal slitter with three adjustable pressure knives - Additional slitting units Why Choose This Machine? The CARTES CE 162 HH is a high-end hot foil embossing platform engineered for converters who require exceptional precision, reliability, and versatility. Bodpfx Ajycv Hksm Tedf Thanks to its dual hot stamping stations, advanced register control, and robust CARTES build quality, it ensures outstanding foil application even at high production speeds. This machine is the premium solution for producing high-value labels in the wine, spirits, cosmetics, and pharmaceutical sectors.

Condition: good (used), Year of construction: 2000, SANJO PO3-350 / Offset Labelpreess We present this SANJO PO3 Offset Labelpress max format 254mm x 330mm / year of manufacture 2000 Machine details:  Year of construction: 2000  Printing process: 6 x Offfset (Toray)  FLEXO VARNISH UNIT Bdjdpou I Nu Ssfx Am Tjf  unwind unit  CORONA DISCHARGE UNIT  2 x HOTSTAMPING UNIT  1 x AIR COOLING DEVICE  UV AIR COOLED UV UNITS  FLATBED DIE CUTTING STATION  SANJO REWINDER with SPOR VARNISHER  MULTIPASS UNIT  High Speed modification has been included Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)