Condition: good (used), Year of construction: 2006, Horizontal machining center Machine type: DMG DMC 100 H Todpfx Abjziy Dljusd Control: Siemens 840D powerline + Shopmill Year: 2006 SPECIFICATIONS Travel X-Axis: 1.000 mm Y-Axis: 1.000 mm Z-Axis: 1.000 mm Spindle speeds: 8.000 rpm Transmission ratio: 2 Spindle power: 100/40% - 32/44KW kW Torque: 100/40% - 827/1.241Nm Nm Tool: HSK 100 Tool capacity: 270 Amount of paletts: 2 Palett size: 800 x 800 mm B-Axes: 0,001° Equipment Electronical handwheel Working mode: 4 Oil mist separator Internal cooling: 40 bar paper band filter Caliper: Renishaw OMP 60 Chip rinsing pistol

Condition: ready for operation (used), Year of construction: 2006, - USED - No 2 4-AXIS HORIZONTAL MACHINING CENTRES WITH 24 POSITIONS PALLET-SYSTEM X-AXIS TRAVEL: 730 mm Y-AXIS TRAVEL: 730 mm Z-AXIS TRAVEL: 850 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 830 mm RAPID FEEDS X-Y-Z: 50 m/min SPINDLE: 8000 rpm; 22-30 kW; ISO 50 - BT PALLET: CONTINUOUS ; 500x500 mm MAX ADMITTED LOAD: 500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 800 x 1000 mm HIGH PRESSURE COOLANT: 80 Bar TOOL MAGAZINE: CHAIN-TYPE ; 240 + 240 POS MAX TOOL DIAMETER: 125 (300) mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 30 Kg CONTROL UNIT: MSX 701 III ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL Todpfx Aszh Rmzebujd NOTE: LPP LINEAR MULTI-PALLET SYSTEM WITH No 24 PALLET AND No 2 LOADING AND UNLOADING STATIONS

Condition: used, Year of construction: 2019, operating hours: 15,000 h, functionality: fully functional, overall weight: 10,000 kg, coolant supply: 60 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used SW BA312 horizontal machining center, year of construction 2019. Machine number: 2320012 Year of construction: 2019 Weight: 100 kN Pneumatic pressure: 6.0 bar Tjdpfx Aez Ezk Njbujd Air consumption: 0.5 Nm3/min Circuit diagram number: 233-000-10181-97 Nominal operating voltage: 3/PE /400V /50Hz Nominal working current: 123 A Fuse rating: 125 A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Tjdsz Ea Dhopfx Abusd Continuous B-axis Axis travels: X900, Y800, Z980 180-position tool magazine Tool breakage detection in the magazine Dust extraction system FMS Fastems linear 10-pallet system (5+5) 2 loading stations

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Tjdpfoyxm Irsx Abusd Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840C, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet (2-station pallet changer) Technical Specification Taper Size SK 40 Tsdpfx Aoy H D Rmjbusd

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. Tedey N N Suepfx Abuod TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: new, Year of construction: 2025, The NQ50 is an efficient and precise horizontal machining center. It is suitable for machining a variety of materials and components in the automotive industry, tool and die making, and the IT sector. To meet production requirements regarding high precision, efficiency, and speed, an automated production line can be configured. The design concept of standardization, modularization, and universality provides the machine tool with outstanding technological advancement and future-proofing, offering excellent value for money. Features: - Compact structure with a small footprint - High rigidity, excellent dynamic characteristics, and superior precision retention - High-performance spindle for improved cutting capability and machining accuracy - Grease lubrication system for energy efficiency and environmental compatibility - Integrated automation interfaces - Cooling of the hollow ball screw on all three axes ensures high stability in serial parts production Travels: - X-axis travel: 730 mm - Y-axis travel: 730 mm - Z-axis travel: 800 mm - Control: FANUC 0i - Spindle center–table surface: 80 – 810 mm - Spindle nose–table: 70 – 870 mm Table: - Table size: 500 x 500 mm - Max. workpiece weight: 500 kg - Pallet indexing: 1° x 360° - Pallet changer system: Rotary design - Number of pallets: 2 - Pallet change time: 1.4 sec Spindle: - Spindle type: Built-in spindle - Max. speed: 12,000 rpm - Spindle power: 18.5/37 kW - Spindle torque: 95.5/250 Nm - Spindle taper: BT40 - Pull stud: P40T-I-MAS403 Feed Drives: - Rapid traverse X/Y/Z: 60 m/min - Cutting feed X/Y/Z: 60 m/min Tool Magazine: - Capacity: 40 tools - Pull stud: P40T-I-MAS403 - Max. tool diameter: 80 mm - Max. tool diameter (adjacent slots free): 160 mm - Max. tool length: 500 mm Tedpew Rpgysfx Abusd - Max. tool weight: 12 kg - Tool-to-tool indexing: 1.5 sec Other Specifications: - Power supply: 45 kVA - Machine weight: 13 t - Installation area (LxWxH): 6450x3150x3250 mm Standard Configurations: - FANUC 0i control - 40-position tool changer (NQ80 60T) - 1° pallet indexing (except HQ100D) - NC rotary table 0.001° (NQ100D) - 40-tool changer - APC automatic pallet changer - Pneumatic and hydraulic lubrication system - Spindle oil cooler - Spindle blow-out system - Coolant system - Ball screw oil cooling - Guideway protection - Chip conveyor, chain type - Three-color signal tower, work light - Automatic shutdown - Self-diagnosis system - Full enclosure - Standard accessories: - Tool box - CE Options: - SIEMENS 828D control - 0.001° pallet indexing (standard on NQ100D) - T-slot table - CTS (coolant through spindle) pressure boost 20/30/70 bar - Control cabinet air conditioning unit - Linear scales - Workpiece measurement - Air blow pistol - Niagara rinsing

Condition: used, Year of manufacture 1997 Tjdpfsw Uf N Sjx Abuod 2 grid tables Working area X 3,900 mm Working area Y 1,600 mm Working area Z 200 mm Additional images available

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm Tsdpsvgmiyefx Abusd spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: as good as new (ex-display), Year of construction: 2023, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,035 mm, Highlights: - fastest chip-to-chip time in this workspace dimension - Optimum footprint - Automation “ready” _____ G720F machining center X-axis travel = 1450 mm Y-axis travel = 1200 mm Z-axis travel = 1035 mm Interference diameter 1,500 mm (2x) table load 2x 750 kg Work area lighting Machine control Siemens Sinumerik ONE HT10 handheld control unit Motorized spindle 17,000 min-1, 64 Nm GROB spindle diagnosis (GSD) for twin-spindle machines Tool magazine, HSK-A-63 with 80 (2x40) tool pockets Tool loading lift for parallel loading and unloading of tools during machining time mechanic-tactile tool breakage check HSK taper shaft cleaning Air blow-off gun Inspection window for viewing the tool change area/tool robot Lighting in the tool change area/tool robot Minimum quantity lubrication unit for two spindles as single-channel Minimum quantity lubrication unit pressure booster Decentralized exhaust system MQL Scraper conveyor with wear plate Basic installation Clamping functionality Evaluation unit for monitoring support evaluation unit for clamping monitoring - volume flow Preparation for process-related measurement (Renishaw) Renishaw RMP400 extra long measuring probe Loading, directly into the machine by the operator Two-hand operation, incl. automatic opening at the end of the cycle Tjdpstiyzdefx Abujd HVO console Preparation for direct loading into the machine by robot Machine status light

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 840 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of axes: 4, This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details. • Machine mass: 18,500 kg • Number of pallets: 2 • Pallet size (L x W): 630 x 630 mm • Maximum workpiece weight: 1,200 kg • Number of tool pockets: 60 • Electrical specs: • Phase: 3 • Frequency: 50 Hz Tedpfx Asyyzqkjbued • Voltage: 200 V • Full load current: 252 A • Spindle motor current rating: 120 A • Interrupting capacity: 5 kA • Rated power: 87 kVA

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,101 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Shopmill 3 D Formingstar, spindle speed (max.): 12,000 rpm, coolant tank capacity: 900 l, The machine is in very good used condition with no outstanding maintenance required! TECHNICAL DETAILS Travel distance in long-operation X-axis: 1,800 mm Travel distance swivel table X-axis: 1,020 mm Travel distance rotary table X-axis: 675 mm Travel distance in pendulum operation: 675/675 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 600 mm Spindle speed: 12,000 rpm Swivel range: +10° to -100° × ±360° Feed rates X/Y/Z: 40 m/min Rotary-swivel table Rotary table size: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slots: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference keyway: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Tedpfx Absy A Rzdsujd Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Axial runout: 0.015/Ø 300 mm Table load capacity: max. 375 kg Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with adjacent pockets free) Chip-to-chip time approx.: 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (IKZ): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total positions: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool change time: approx. 17–22 s Space required: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D touch probe Rotary-swivel table

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm Tsdpfx Ajx D Hzyebuod • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D • Tool magazine: 160 Todpfxsx D I Alo Abued • Tool holder type: HSK-63A

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Tsdox D Skmepfx Abued • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Todpfx Absyw N Iroued Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system Tsdpfjwi Ibujx Abujd - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 Tedpfx Abjwxdpgjuod - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 -Dimensions: 780/420 / H300 mm Todpfxjg U A I Ho Abusd -Weight: 66 kg

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS Todpfek R Tp Uox Abuod X-axis travel: 720 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Control system: OKUMA OSP 7000 Pallet size: 500 x 500 mm Spindle speed: 10 - 5000 rpm Tool holder: 10-position pallet changer Tool interface: MAS BT 50 Number of tool positions: 200 EQUIPMENT - Tool breakage detector - Renishaw measuring probe - High-pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery should be determined based on the description and not the images.

Condition: not inspected (used), Hydromat HB32-636 Manufacturer: Pfiffner Tsdpsi Ewr Tjfx Abuod Serial number: 6.07.043-7 (4.0m) Number of units produced to date: 8,960,881 Footprint: 11m x 5m

Condition: not inspected (used), Hydromat Todpfxei Ewtuo Abujd HW25-714 Manufacturer: Pfiffner Serial number: 5.07.021-1 (4.2m) Total units produced to date: approximately 7,800,000 Footprint: 9m x 4m + control cabinet

Year of construction: 2002, condition: ready for operation (used), Hurco VM 1 machining center Spindle speed max. 8000 RPM Tedpfx Aei E Iacjbujd Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle: 2000 hours Complete software options, DXF, thread cutting without collet Various tools included, Hilma vise, drawer cabinet with tools.

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Todpfxoqzhfxe Abusd Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation