Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Bedpfjzil T Eox Adholp Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, G.i.N. Type: GL5350 GL5350-8H-1R3L Bodpozg Tzrofx Adhslp G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Future vehicle generations will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger volumes of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 lines (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB and mobile network Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN Interfaces CAN 2.0 16 CAN FD 4 LIN Interfaces 5 RS-232 Interfaces 7 Analog Inputs 10 Bit 4 Operating Voltage +7 V … +50 V Power Consumption at 12 V: typ. 10.3 W Current Consumption at 12 V: in Sleep Mode < 2 mA in Half-Sleep Mode typ. 180 mA in Operation typ. 860 mA Operating Temperature Range -40 °C... +70 °C Housing: Material Side Profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Decorative Strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, KSE Bjdpfxjzdzils Adhelp KSE Leakage Testing System Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Blsdpfx Aezd R Drjdhsp   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Hexagon Type: Hexagon Optiv Performance 442 Product description: The 3D multi-sensor coordinate measuring machine Optiv Performance 442 combines optical and tactile measurements in a single system. The system supports multi-sensor measurements with a vision sensor, tactile sensor, TTL laser (Through-The-Lens), and the innovative Chromatic White Light Sensor (cws). The base unit with a vision sensor can be expanded with all available sensors in a modular fashion. Application areas: • Suitable for use on level floors • Versatile geometric measurements and GD&T analyses with standard construction accuracy • Design principle: » Low-vibration granite construction with a fixed bridge and a movable table » Integrated substructure with optional vibration dampers • Guides: » Precise mechanical linear guides in all axes • Drives: » DC servomotors, power transmission via backlash-free recirculating ball screws in the center of gravity • Length measuring system: » Incremental length measuring system • Resolution: 0.1 pm Hexagon Optiv 442 multi-sensor measuring machine equipped with a camera, laser, and Renishaw probe system. Bjdjzgr R Eepfx Adhslp • Measuring range per sensor: 410x410x200mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. load capacity: glass plate 30kg • Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) • Max. travel speed per axis: 200mm/s • Camera with 2-stage zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5% Power consumption 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, LDS LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Type: Air-Cooled Vibrator Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Bsdpfx Aey Uigcjdhjlp Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Blodpfx Adjzh D Rmshep Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Köhler Type: HKT 500 WTG Köhler salt spray chamber, corrosion chamber Köhler salt spray chamber HKT 500 Operation via touchscreen Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber, room temperature to 50°C Power supply: 230V 1P/N/50Hz 3000W Weight: 400 kg Condition: used Scope of delivery: (See picture) Blodpfx Adozd Ux Tehep (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Lindner Type: AGB Burst Testing Stand TMM4 Lindner Burst Testing Stand AGB Burst Testing Stand TMM4 Technical Data: AGB Burst Testing Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Temperature range, chamber: RT ... 180°C Temperature range, medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Bljdjzd Sivopfx Adhop Dimensions: Length 2150 mm x Width 1050 mm x Height 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required to put the burst testing stand into operation: Pump, cooling tower & fire alarm control panel – these are not included. Weight: approx. 705 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Bsdpfx Aozachcjdholp Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, Weiss Type: WT1-600/70 Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 External dimensions (without hinges and door closure) Height 1980 mm, Width 1085 mm, Depth 1655 mm Bsdpfxjzd R Sve Adholp Internal dimensions Height 950 mm, Width 800 mm, Depth 800 mm Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load on the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Bedezd Sdmopfx Adhslp Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Bljdpfx Ajzd Uh Iodhsp Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Primus Engineering Type: DST 350 This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Bodpfx Adszgbtiohelp

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without… approx. 1820 mm, with… approx. 1915 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. circuit breaker rating: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Bjdpfx Adozp D Axjhelp For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VT 7011 Heraeus Vötsch temperature control cabinet, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Cooling rate: 3.2 K/min Heating rate: 3.5 K/min Refrigerant: R-404 A / R 23 Blodezdtd Ispfx Adhep Voltage: 1/N/PE AC 230V ±10%, 50Hz Rated power: 1.8 kW Rated current: 12 A For your security as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VT 7012 S3 Vötsch Shock Test Chamber Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220°C Bljdezd Uzujpfx Adhep Medium chamber: -10 to +90°C Cold chamber: -80 to +70°C Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar For your safety as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, WEISS TECHNIK Weiss Technik WK1-180/70 Climate Test Chamber, Temperature Test Chamber – -70 to +180 °C – 5.5 kW Weiss Technik WK1-180/70 Climate and temperature test chamber with a stainless steel test chamber, digital control panel, and a temperature range of -70 to +180 °C. For sale is a used climate test chamber from the manufacturer Weiss Umwelttechnik GmbH. This device is suitable for temperature and climate testing of components, assemblies, and industrial products. The temperature range extends from a minimum of -70 °C to a maximum of +180 °C. The test chamber features a stainless steel test chamber, an insulated door with a viewing window, and a digital control panel. Lateral cable entries allow for the connection of measuring cables during testing. Technical data: Manufacturer: Weiss Umwelttechnik GmbH / Weiss Technik Model: WK1-180/70 Product type: Climate and temperature test chamber Device no.: 58226012250020 Material no.: 67609071 Temperature range: -70 to +180 °C Operating hours according to display: 45,555.3 h Permissible operating overpressure: 25 bar Test chamber volume: approx. 190 liters Electrical data: Voltage supply: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 5.5 kW Rated current: 12 A Refrigerant: R404A: 2.3 kg R23: 0.8 kg Equipment: Digital control and operating panel Stainless steel test chamber with insert grid Insulated test chamber door with viewing window Interior lighting Circulation fan Lateral cable entries Cable entries: Measured diameters: approx. 57.69 mm approx. 87.23 mm approx. 132.42 mm Blodj Agmfnspfx Adhep Scope of supply: 1 × Weiss Technik WK1-180/70 Climate Test Chamber with integrated control panel and insert grid as shown in the picture. The sale is made in the condition shown. Condition: Used Signs of wear and tear due to age and use. Condition and scope of supply see pictures. Tools, machines, and other items not explicitly mentioned are not included in the sale. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: Bljdpfxs Aghkus Adhsp R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Cold and Heat Shock Testing Chamber – Temperature Shock Chamber, -80 °C to +220 °C – 125 Liters Vötsch VT³ 7012 S2 Industrial temperature shock testing chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock testing chamber, model VT³ 7012 S2. The unit is suitable for testing components, electronic parts, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of -80 to +70 °C. The testing chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock testing chamber / Temperature shock chamber Year of manufacture: 2016 Equipment number: 58566224220040 Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Operating hours according to control display: 4,800.5 h Weight: approx. 1,000 kg (estimate, not weighed) Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: -80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Bsdpfxe Agm Uco Adhjlp Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standing pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measurement and control functions Scope of delivery: 1 × Vötsch VT³ 7012 S2 temperature shock testing chamber with integrated touchscreen control and existing equipment as shown in the picture. Other accessories not shown in the picture are not included in the offer. Condition: Used Optically well-maintained condition with typical signs of wear. The unit can be switched on. Touchscreen control, temperature displays, and interior lighting are functioning. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to change, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Bjdpfezii Dnjx Adholp Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, RMS Technical specifications (manufacturer/model type – no guarantee): Peak force: “according to the manufacturer’s specifications” in the range of approximately 10 kN. Max. acceleration: “up to approximately 1,000 m/s²” Max. speed: “typically in the range of approximately 1 m/s to a few m/s” Bljdpfjzikc Ssx Adhjp Components: Control cabinet TGA 022/3 Vibration exciter SW 6507 Power amplifier TG D 9000-000.00 Fan Condition: used Scope of delivery: Vibration testing system as shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, CTS Bljdpfx Aezd R A Ujdhop Type: CW-40/16 CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS   Type: T-30/950 Ex/I   CTS Temperature Test Chamber, Explosion-Proof   Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site control of the test item   Temperature tests:   Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate:   Heating: 2 K/min Cooling: 1.5 K/min up to -10°C   Heat radiation: approx. 1000 W at +20°C approx. 200 W at -25°C   Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume). The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch. The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air. The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.   The gas system is currently out of operation!   The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without irradiation, and without additional equipment.   Dimensions: Test volume: 950 liters Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm   Bledpfozd Rzwjx Adhep Operating data:   Electrical connection: 400V+6/-10 %, 3/N, 50 Hz Rated power: 21.6 kW Rated current: 36.5 A   Protection class: IP 54   Condensate drain: unpressurized, R 1/2" internal thread   Sound pressure level: < 62 dB(A)   (according to DIN EN ISO 3744 measured at a distance of 1 m from the front)   Weight: approx. 1500 kg, control cabinet approx. 300 kg   External refrigeration unit   Refrigerant: R404A / R23   For your security as a buyer, the following information:   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We are happy to answer any further questions by telephone.

Condition: used, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Thanks to the improved QuickLock™ mechanism and the locking button on the front, even bulky accessories can be quickly and, above all, safely installed. In addition, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. Bledpfxjzh D Nvj Adhop FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water interface And much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.