Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Ibodpfxjx Ag R Se Ah Uof External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head Iodjx Ebx Ajpfx Ah Uobf ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: not inspected (used), functionality: unexamined, measuring range X-axis: 800 mm, measuring range Y-axis: 1,400 mm, measuring range Z-axis: 500 mm, table width: 1,170 mm, table length: 2,120 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Bidding obliges the buyer to collect the machine within the specified timeframe: from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 1,400 mm Travel Z-axis: 500 mm Worktable dimensions: 2,120 x 1,170 mm Ijdpfxjxqqkfs Ah Uebf Magnetic chuck dimensions: 600 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 2,400 x 3,500 mm Weight: 7,000 kg EQUIPMENT Magnetic clamping plate Workshop drawer cabinet with contents Various measuring tools (measuring pins and touch probe) Additional suitable accessories

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, For sale: Used Wenzel WP-KL coordinate measuring machine, year of manufacture 2007, in excellent condition and immediately ready for operation. The machine is ideally suited for quality assurance, toolmaking, and precision metrology applications. General Condition The machine is in very good technical and visual condition, professionally overhauled and upgraded in 2022. Inspection on site is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (not extended: 3,470 mm) Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment - CNC control: WPC, 3 axes - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with Scanning Kit 2 (stylus lengths 50–100 mm) - Probe change rack: Renishaw FCR25, 3 positions, not equipped PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC geometry inspection software – Version 2025 - WM QUARTIS CNC freeform surface application – Version 2025 - WM QUARTIS CNC CAD import interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included) Ibodpfx Asx H Tqijh Uof - Small M3 stylus kit - Reference sphere - PC and controller trolley with integrated desk - Ergonomic hand control panel HT400 If interested or if you have any questions, please get in touch! Price €89,000 net, negotiable for quick transaction. All details provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K Isdpfx Aex Exmtoh Uobf in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 50 kg, total height: 1,090 mm, total width: 330 mm, total length: 530 mm, Used 5 kN tensile and compression testing machine. Can be supplied with load cells ranging from 5 N up to 5 kN, depending on your requirements. The Emperor software works perfectly under Windows 11. Currently, many testers in the Netherlands and Belgium are still operating with this software. The software features an advanced module that allows the programming of highly complex procedures. There is also a basic mode for use in, for example, a production environment. In this mode, tests can be run with a single mouse click, and results are clearly displayed with a pass/fail indication. All data is, of course, stored and can be retrieved later. Ijdpfx Ajx Apntoh Uebf The price includes a load cell of your choice (subject to availability), delivery within the Netherlands and Belgium, commissioning, and training. We provide a 6-month warranty. If the tester fails within this period, we will repair it if possible; if not, the purchase amount will be deducted as a discount on a new tensile testing machine.

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts Iodpfjxz A Evsx Ah Ujbf - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: used, Position consists of: (1) rotational viscometer Ibsdpfx Aex E Ubash Uof

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, A Keyence 3D measuring system is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Keyence (Japan) • Model: XM-1500 (measuring system) • Measuring head: XM-T1000 • Year of manufacture: 2016 • With hand probe, adhesive plate • Measuring range: 300x250x150mm • Display unit: 1 µm • Angular resolution: 0.0001 ° • Max. workpiece weight: 25 kg • Condition: Used, functional The measuring machine was used until recently and is fully functional. Shipping costs by freight forwarder: approx. £100 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Ibedpfx Ahjx Himgj Uof Errors in technical data and prior sale reserved.

Condition: excellent (used), Year of construction: 2008, functionality: not functional, Faro Gage Plus measuring arm with 6 axes Arm length: 4 ft (approx. 1.2 m) Accuracy: 5+8L/1000µm Includes cart, accessories, and matching transport case User manual included No software available!!! Ibodjx Hfwnopfx Ah Uof

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Ijdpfx Ajxyungjh Uebf Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: Ibedpfex Apg Asx Ah Uef – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Ibsdpfsxzprcjx Ah Usf Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: used, Year of construction: 2012, Lot consists of: (1) measuring microscope Ibodpfx Asx E Tm Ieh Ujf

Condition: like new (used), inclusive extensive Equipment > Enumeration follows Ijdpfx Ahokw T H Ao Ujbf

Year of construction: 2005, condition: used, Analyzer, rheometer, viscosity meter, Modular Advanced Rheometer System Iedexm U S Ejpfx Ah Usbf -Condition: Function only as shown in the video, other functions not guaranteed -Scope of delivery: as shown in the pictures -Manufacturer: Thermo Electron Haake Mars, Modular Advanced Rheometer System -Haake Universal Controller: Thermo Electron Type Haake Universal Temperature Controller: Thermo Electron type Dimensions: 1070/450/H860 mm -Weight: 86 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, A used agglomerator from WEISS is being offered. Model: RL 900/2. Motors: 2 x 110 kW. Ibjdexl Rw Ujpfx Ah Ujf

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. Iedpfx Asw Nylksh Usbf The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: Ibodoxzgn Ijpfx Ah Usf 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2003, Lot consists of: (1) profilometer Isdpfex E Tmnjx Ah Usbf

Condition: ready for operation (used), Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-2000 coordinate measuring system. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Iodjxzn E Uopfx Ah Usbf Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 7 December 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm Iedpfx Ahex Dda To Uebf voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: Ijdjx A Imzopfx Ah Usbf - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Isdpfx Ahox Ih A Ns Uobf

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Ibodpfjxywh Nsx Ah Ujf Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.