Condition: used, WML-1, Semilab Lifetime Tester with housing and capacitive sensor Model: WML-1 Type: WML-1 Crslqoq S Tm Tsutczjb Condition: Used

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Crelquev Tywqetczjb Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Functionality: fully functional, 3 Microtec Golden Eye 600 multi-sensor quality scanners (original packaging) for longitudinal through-feed measurements (2 scanners with a maximum measuring field width of 600 mm, 1 scanner with a maximum measuring field width of 900 mm) The scanners are part of a complete log band sawmill for beech wood with a maximum log diameter of 1000 mm, consisting of: a. Log yard with root reducer, cross-cut saw, debarker (Nicholson), and sorting log train with 26 boxes b. 3 inclined log band saw lines (log length max. 4.6 m), each with Crelqutcewgk Ulezeb - chipper head - log carriage with 3 clamping blocks - band saw with a roll diameter of 1800 mm (forward and reverse cut), 132 kW drive c. 3 horizontal band resaw lines – roll diameter of 1400 mm d. 3 Paul cross-cut saw lines e. 1 circular edger and sorting line with 21 vertical boxes with raising and lowering shelves for planks, a cross-conveyor for emptying, and an automatic stacking system. For 7 vacuum stacking robot lines with integrated plank magazines and a total of 42 lifting tables. Further details and pricing upon request.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, Functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Celjglp Nqsqutczorb Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2024 Includes PC and Software Illustrative Image by the Manufacturer

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, General machine data: Machine type: CNC Crysta Apex S544 Manufacturer: Mitutoyo Measuring range: 500 x 400 x 400 mm Crjlqstu Tyqeutczsb Control: UC-400 Operating instructions: Available Hardware and software equipment: Computer/CPU: Demonstration/new device Screen: Demonstration/new device Printer: Demonstration/new device Software: Mitutoyo Software MCosmos-1 Accessories: Probe holder: Renishaw PH-10M Probe: Renishaw TP200 Additional accessories: Ceramic calibration sphere, various probe spheres and extensions, Renishaw interchangeable bar 1 x SCR-200 incl. 5 x TP-200 modules This Mitutoyo Crysta-Apex S544 offers an optimal solution for precise measurement requirements and is equipped with state-of-the-art hardware and comprehensive software. Its versatile accessories, including various probes, a ceramic calibration sphere and additional measuring instruments, make it perfect for carrying out a wide range of measurement projects with maximum accuracy. The device has been professionally maintained and is in excellent condition. Kneissl Messtechnik GmbH is a close and trusted partner of Mitutoyo. Thanks to this close cooperation, we can respond to individual customer requests and make specific adaptations to the Mitutoyo Crysta-Apex S544.

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Crslqutjt T Uaveczob

Condition: used, RfN WML-1 / WML 1 / WML1, Semilab Lifetime Tester Model: WML-1 Cjlqutjq S Td Doczjrb Condition: Used

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Crolqsv Tnd Sjutczeb We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, Outstanding condition, well maintained, immediate availability, transport can be arranged Celquev D Rmkjtczorb

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Crjlqsd Ambtsutczjb Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: excellent (used), The QV APEX 404 Pro combines speed (e.g., strobe lighting for high-speed measurements) with precision. The QVPAK 10.0 software offers cutting-edge programming tools and efficient workflows – perfect for Industry 4.0 requirements. As an accredited laboratory, we guarantee transparency and expertise – contact us for a detailed on-site inspection or technical documentation upon request! General Machine Data Machine Type: CNC Vision Measuring System Quick Vision Pro Manufacturer: Mitutoyo Model: QV APEX 404 Pro (Code Number: 364-131 EU) Year of Manufacture: 2011 Measuring Range: 400 x 400 x 250 mm (X/Y/Z) – ideal for medium to large workpieces. Control System: CNC-controlled with high-precision linear scale resolution of 0.1 µm. User Manual: Fully available. Hardware & Software Computer/CPU: New device – optimized performance for complex measurement tasks. Monitor: New device – sharp display of measurement data. Software: Mitutoyo QVPAK 10.0 – includes an intuitive user interface, drag-and-drop functionality, and automatic error compensation. Cjlsvuqwwoqutczjrb Camera: High-resolution CCD camera – precise capture of surface details. Key Features Lighting System: LED coaxial lighting, white transmitted light, and programmable 4-quadrant ring light – adaptable for different materials and contrasts. Optics: Interchangeable lenses with 1x, 2x, 6x magnification and digital 12x zoom for detailed analysis. Additional Functions: Touch probe for combined non-contact and tactile measurements. Manual temperature compensation for stable results under varying environmental conditions. Quality & Maintenance Condition: Flawless – regularly calibrated and serviced by Mitutoyo (last service in 2025). Precision: Measuring accuracy (MPE): XY-axis (1.5 + 3L/1000) µm, Z-axis (1.5 + 4L/1000) µm. Accreditation Expertise: We are an accredited optical calibration laboratory – the machine has been independently inspected and technically evaluated by our certified experts. Proof of Competence: Our accreditation confirms our authority in assessing measurement systems – you receive a machine with independently verified performance. Benefits for Buyers Ready for Immediate Use: Fully configured and tested by Mitutoyo and our laboratory. Trustworthiness: Combines manufacturer-backed service with independent verification from our accredited lab. Cost Efficiency: Significantly more affordable than a new machine, with equivalent performance. Support: As an official Mitutoyo partner, we provide technical support, training, and calibration services all in one place.

Condition: used, SR5058 SPIRENT Test Configuration Unit SN UCU290B3 Model: SR5058 Cjlqutjq S Su Hjczerb Condition: Used

Condition: good (used), Year of construction: 2006, Functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 800 mm, Available immediately. Delivery (nationwide) after order in a maximum of 7 days. General machine data: Machine type: Crysta Apex C9168 Crjlqujtu Tyiotczob Year of manufacture: Mid 2006 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 800 mm Control system: UC-200H Operating instructions: Available Hardware and software equipment: Computer/CPU: Demonstration unit/new unit Screen: Demonstration unit Printer: Demonstration unit Software: Current Mitutoyo software MCosmos-1 Geopak-WIN Accessories: Probe holder: Renishaw PH10MQ Probe: Renishaw TP200 Additional accessories: Ceramic calibration sphere, various probe spheres and extensions, Renishaw interchangeable bar 1 x SCR-200 incl. 5 x TP-200 modules This Mitutoyo Crysta-Apex C9168 from mid-2006 is designed for versatile measuring applications. Equipped with modern hardware and the latest software from Mitutoyo, it offers high precision and reliability. The extensive range of accessories, including the Renishaw probe head and calibration sphere, enables a variety of measurement tasks.

Condition: used, LK 1912AU-CSLP, LP Industrietech GmbH, PC Panel Crjlqutcjuta Acezob Model: LK 1912AU-CSLP Condition: Used

Condition: used, 8015605, CWA30 203120, CYBEROPTICS, Optical Sensor Colqutcsvrha Rozerb Model: 8015605 Type: CWA30 203120 Condition: Used

Condition: used, EL-FLOW Select F-201CV, Bronkhorst, mass flow controller, 300sccm/SiH4/V1.22i Crolqutoq S Ucajczeb Model: EL-FLOW Select F-201CV Condition: Used

Condition: used, EL-FLOW Select F-201CV, Bronkhorst, mass flow controller, 500sccm/SiH4/V1.22i Model: EL-FLOW Select F-201CV Crslqutsq S Ub Ijczeb Condition: Used

Condition: new, 50111325, LPS 36, LEUZE Sensor, V01.25 Model: 50111325 Crslsq S Upujqutczjb Type: LPS 36 Condition: New

Condition: new, OCP352P0150P, Wenglor, laser distance sensor triangulation Model: OCP352P0150P Condition: New Crjlevrhtwsqutczob

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Model: WT-2000PV Type: µ-PCD Condition: Used Colqutspvkt Soczjrb

Condition: used, ILD2200-3(222), optoNCDT 2200, Micro Epsilon Laser Triangulation Sensor System Colqutoq S Sl Eoczorb Model: ILD2200-3(222) Condition: Used

Condition: used, 000196026, Thermosensorik Power Supply + Multi-I/O-Box Model: 196026 Condition: Used Cslquoq S R Tuotczorb

Condition: used, 18236-140*2, B56Hx140/1P-SC-Y 4x2 1/2"(54), Swep, brazed plate heat exchanger Model: 18236-140*2 Type: B56Hx140/1P-SC-Y 4x2 1/2 Condition: Used Crslqothfnveutczob

Condition: new, 50111325, LPS 36, LEUZE ELECTRONIC line profile sensor, V01.20 Celqjvrhr Tjutczerb Model: 50111325 Type: LPS 36 Condition: New

Condition: used, S/N: 6201130682, MN7464F, Anritsu SVLTE and Band20 Filter Unit + Cable Model: MN7464F Condition: Used Cjlqsq S Sgkjutczsrb