Condition: excellent (used), RMS Vibration test system Here we offer you a RMS electrodynamic vibration test system. RMS Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 Hsdpsgk I I Tefx Agwspa 30V-50A-3434 N power amplifier TGA 3000-000.00 Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Hjdpfxjklv H Ie Agwepa Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range Hjdpok Scxmofx Agwspa -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C Hpodjcnic Dspfx Agwja ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Hodpfxoiz Tqce Agwjpa Further questions we can answer on the phone for you.

Year of construction: 1996, condition: good (used), Here we offer a Voetsch drying oven Waermeschrank Waermeofen. Hpodpsbqh I Sefx Agwoa Voetsch NTU 60/60 250°C Nominal temperature: 250°C Supply voltage: 400 V 3 (N) PE AC, 50/60 Hz Interior dimensions: width 600 mm/height 600 mm/depth 600 mm External dimensions: width 1000 mm/height 1675 mm/depth 1300 mm Air circulation blower Type: Voetsch NTU 60/60 Scope of delivery: (see picture) (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Hpsdpfsxmhycjx Agwoa Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Hpedpfx Asxugiregwja Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Feutron Type: 3416/17 Temperature test chamber Air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Hpodpfxsu E N Tie Agwea Fan motor and door dismantled: width 1540 mm x height 1940 mm x depth 925 mm Test chamber: width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x height 2090 mm x depth 2165 mm Through-hole 2 pieces side wall, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW  Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: WK-340/70 Air-cooled Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Characteristics for temperature tests: Temperature range -70 to +180°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature fluctuation over space: ± 0.5 to ± 2.0 K Temperature change rate for heating: 3 K/min Temperature change rate for cooling: 2 K/min Characteristics for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature fluctuation over time: ± 0.1 to ± 0.3 K spatial ± 0.5 to ± 1 K Humidity fluctuation in the center of the usable space ± 1 to ± 3% RH Electrical connection: 3/N/PE AC, 400 V ± 10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety, please note the following information!   Hodpfx Agev Uap Njwjpa The following steps are carried out in advance on our chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a test run monitored by calibrated devices. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCS³ 7027-10 Vötsch Climatic Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Temperature test data: Temperature range -72°C to +180°C Temperature deviation over time in the center of the work space ± 0.3 K to ± 0.5 K Temperature deviation over space ± 0.5 K to ± 2.0 K Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min Climatic test data: Temperature range +10°C to +95°C (Extended climatic range: 2°C/95% RH, controlled for a maximum of 2 hours) Temperature deviation over time in the center of the work space ± 0.2 K to ± 0.3 K Temperature deviation over space ± 0.5 K to ± 1.0 K Humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters Side opening 50 mm Side opening 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Hsdpfjv R Ty Tjx Agwspa Rated voltage: 3/N/PE AC 400 V±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on-site: 63 A slow-blow Refrigerant R404A/R-23 Weight approx. 835 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Hedpfx Aov N Hc Ejgwepa Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: used, Bruker Type: Tensor 27 IR spectrometer Full sample flexibility. The improved QuickLockTM mechanism and the locking button on the front even bulky accessories can be installed quickly and, above all, safely. The INVENIO can also be equipped with three software-controlled beam outputs for a variety of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integration sphere Autosampler for liquids High-throughput analysis module HTS-XT Hpedpfsvwcikox Agwja Reflection unit for the air-water phase boundary Much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Hjdpowl D Aaofx Agwspa Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Hedpfx Agsumv Emewopa Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Hpedpfx Ajun Izcsgwoa

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Hpjdpfx Agouuaryewoa Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Shaker 4x LDS V721 air-cooled Amplifier : PA 1000L Controller : imv K2 MIMO (Multi Input Multi Output) Software : imv K2 Excitation modes : Sine / Noise / Shock / Real-time profiles Force vector per shaker : 2.9 kN (peak sine) / 1.9 kN (RMS noise) / 4.6 kN (peak shock) Max. load : 100 kg per shaker Acceleration : max. 44 g RMS / 66 g peak Velocity : max. 0.7 m/s Displacement amplitude : max. 25.4 mm p-p (1 inch) Frequency range : 5...4000 Hz Clamping surface for test specimens : 1000 x 1000 mm aluminum profile frame Special features : The four shakers can be operated synchronously or asynchronously with the MIMO controller. With an aluminum profile frame, a clamping area of 1x1 m² can be achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large test specimens such as complete vehicles is possible. The lightweight oscillating elements of the shakers enable excitation frequencies of up to 4000 Hz. Weight: 2000 kg Climatic chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / monoblock, welded Hpjdpfsur Hrbox Agwsa Dimensions:(mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of power unit: 1,200 2,400 2,200 Door: 2,000 2,000 2 test room windows in the door: 460 460 Weight: 4,500 kg Insulation 140 mm PU, CFC-free, B1 to DIN 4102 External cladding: sheet steel 0.6 mm, painted to RAK 7035 Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K temporal Climatic range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of delivery: (see picture) Example pictures! Actual pictures will follow! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, LDS Type: V875 Shaker System V875-440 with amplifier SPA40K Shaker for medium forces Technical data: Headexpander 850 * 850 mm Armature dimensions: 440 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Condition: gebraucht / used Weight: Shaker approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Scope of delivery: (See pictures) (We reserve the right to make changes and errors in the technical data!) Hjdpfxouxcpws Agwspa We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Vötsch Vötsch Climate Test Chamber, Air Cooled Converted to refrigerant R-452a Specifications for Temperature Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.5 K Spatial tolerance: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5: Heating: 3.2 K/min. Cooling: 3.5 K/min. Specifications for Climate Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.3 K Spatial tolerance: ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Hpodsxbrkhspfx Agwja Housing dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Rated current: 9 A Refrigerant: R-452a Test chamber volume: approx. 335 liters Weight: approx. 515 kg net Important information for you as a buyer! The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: used, Zwick / Roell Type: LTM10 Max test frequency: 100 Hz depending on the amplitude Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test chamber height without force transducer: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partly by Zwick/Roell Accessories: screw clamps, software (TestXpert research) Connection 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Hpedev Ifgtepfx Agwsa We will be happy to answer any further questions you may have over the phone.

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone. Hpodpfx Agjhaapfowja

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant Hsdpfx Aetzbzcsgwspa 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Hpjdpfxotzbz Ao Agwea Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Hpjdpfxeu S Ahqo Agwea Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: