Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Fjdpfx Aasu Egz Ronepp Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Vötsch VCS 4100 climate testing chamber, -40 °C to +180 °C Manufacturer: Vötsch Type: VCS 4100 Temperature range: -40 °C to +180 °C Supply voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 You can find more items – new and used – in our shop! International shipping costs available upon request! Fpedpfxeuuiygj Aansp

Condition: excellent (used), Year of construction: 2018, We are selling our Faro Quantum S measuring arm, including the Polyworks software package. Year of manufacture: 2018, last calibration: 2024. Comes with various accessories. Ready for immediate use. Fsdpfx Ajz Rkncsanjpp

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Technical data and features: - Year of manufacture: 2018 - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d Fjdpoz Rmkysfx Aanepp - RDS probe changing magazine - 36-piece RST probe kit - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26

Condition: excellent (used), Year of construction: 2016, X-axis: 1,200 mm Y-axis: 2,000 mm Z-axis: 1,000 mm Weight: 8 tons Fpsdpfx Aaez Rncksnjp Maximum workpiece weight: 2,750 kg Probe head: PH 10 M Includes documentation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 3,200 mm, measuring range Z-axis: 2,100 mm, workpiece weight (max.): 4,500 kg, total height: 3,660 mm, type of input current: AC, total length: 4,800 mm, overall weight: 11,000 kg, input voltage: 230 V, table width: 3,200 mm, table height: 725 mm, table length: 4,800 mm, year of last overhaul: 2024, Equipment: documentation/manual, type plate available, Dual-column CMM * Floor-mounted design (measuring plate in one piece, 5000 x 3100 mm) * Measuring plate is decoupled with active vibration isolation Measuring range * X 4,000, Y 2 x 1,600 (3,200), Z 2,100 [mm] * Overlap of columns in Y = 150 [mm] Measuring uncertainty Single column: 20 + L/60, max. 60 [µm] at L = 4,000 mm Dual column: 40 + L/35, max. 80 [µm] at L = 4,000 mm Dynamics 3D traversing speed 433 mm/sec 3D acceleration 768 mm/sec² Probing system (per column) * HEXAGON HH-AS2.5° * Optical laser scanner, type HP-L-10.10 Controller (per column) * DC800 ETH Wireless operating unit * Portable terminal with display Computer (per column) * DELL Tower, 24" monitors * According to the software manufacturer's specifications Software (per column) * PCDMIS CAD++ 2026.R1 * Option: Laser sensor HP-L-10.10 * Dual-column function Extensive accessories * Calibration sphere holder - tactile probes - equipped with 3 * Calibration sphere holder - optical laser - equipped with 2 * Variable stylus assortment * 8-position modules in various lengths * SICK light curtain system integrated for automatic operation, all-round Supplier services * Transport, commissioning, calibration, final acceptance Warranty Fedez Rpmwjpfx Aanjpp * 12 months, from the date of acceptance Availability * Short-term

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Fjdpfx Aaj Aa Nc Nonjpp Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: excellent (used), • Robust and stable aluminum base • Two guide rails for smooth movement • LCD display with clear readings • Functions: ON/OFF, ZERO, HOLD, PRESET • Original quality “Made in Japan” • Clearly visible serial number – guarantees authenticity • Very good condition – used equipment, tested • No play, accurate and repeatable measurements Fpodpfoz Slbhjx Aansp • Ready for use – no additional accessories required An excellent tool for workshops, tool rooms, quality control departments, and for precise measurements.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer the following machine for sale: Keyence WM-6025 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Fsdpfjz Sxr Sjx Aanepp This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, Item description Temperature range: +20 to +80 °C (IN/IF) Setting accuracy: 0.1 °C Capacity: 161 liters External dimensions (W × H × D): approx. 745 × 1107 × 584 mm External depth including door handle: approx. 640 mm Fjdpfx Aaoz Szlzjnspp Internal dimensions (W × H × D): approx. 560 × 720 × 400 mm Weight: 72 kg Power: 1,600 W (IN/IF) Power supply: 230 V Power consumption: 7.0 A (IN/IF) Max. number of shelves: 8 Max. load per shelf: 30 kg Max. total load: 210 kg

Condition: good (used), Pressure transmitter, Endress+ Hauser – used: Fpedpfsz Sdxrsx Aanjp Price per unit, ex works: €95.00 (net)! Manufacturer: Endress+ Hauser Type: unknown / will be provided later Year of manufacture: unknown / will be provided later Available quantity: to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, functionality: fully functional, For sale is a high-quality linear measuring system consisting of a Heidenhain MT101M measuring probe and an ND221 display unit. Ideal for precise measurements in mechanical engineering, manufacturing, or testing. Highlights: * High-precision measuring probe MT101M Fsds Afbubopfx Aanepp * Digital display unit ND221 – easy to read * Robust industrial quality from Heidenhain * Perfect for length and comparative measurements * Ready for immediate use Condition: Used, but in very good condition. Fully functional. Normal signs of wear and tear (see pictures). Scope of delivery: * Heidenhain MT101M measuring probe * ND221 display unit * Connecting cable * Measuring table (choice between a large and a small measuring table)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 145222060650, measuring range X-axis: 1,600 mm, measuring range Y-axis: 2,400 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 4,000 kg, total height: 3,610 mm, total width: 2,627 mm, total length: 3,160 mm, overall weight: 11,500 kg, input voltage: 240 V, table width: 2,500 mm, table height: 800 mm, table length: 3,160 mm, Equipment: documentation/manual, type plate available, Year of Manufacture: 2022 – Modern, state-of-the-art system in excellent working condition. Premium bridge-type coordinate measuring machine (CMM) from the world leader in industrial metrology. Maximum flexibility thanks to a modular sensor platform. Outstanding thermal stability, ensuring reliable results in real-world shop floor environments. Annual ZEISS Service & Calibration: Maintained and calibrated exclusively by original ZEISS service technicians every year. Full Traceability: Fodpfx Ao Afhnusanjpp Machine accuracy is fully documented and certified according to international standards. Equipped with a ZEISS VAST scanning head.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, type plate available, KEYENCE VHX-7000 Digital Microscope – 4K Camera System with 20–200x Zoom For sale is a digital microscope system from KEYENCE, manufactured in 2023, in a high-quality design. The KEYENCE VHX-7000 system is suitable for demanding industrial applications in optical inspection, quality control, as well as surface and component analysis. The system features a swiveling 4K camera unit and a variable 20–200x zoom. Operation and image evaluation are performed via KEYENCE software. Technical data Manufacturer: KEYENCE Model / Designation: VHX 7000 S770E Software: KEYENCE Fode Af U H Aspfx Aanspp System: Digital 4K camera system Camera: Swiveling Zoom: 20–200x Year of manufacture: 2023 Equipment and applications The system enables a detailed visual examination of workpieces, components, and surfaces. It is particularly suitable for use in industrial quality assurance, manufacturing, development, and failure analysis. The digital image display supports comfortable viewing and assessment of test objects. Thanks to the variable zoom and swiveling camera, the system can be flexibly adapted to different inspection tasks. Price and sale Selling price: €19,900 Lease takeover possible (lease ends 09/2027) If you are interested or have any questions, please do not hesitate to contact us. An inspection and demonstration of the system can be arranged by appointment.

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio Fpedpfxsxbgrge Aanop

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Fjdow Ah Axopfx Aanopp Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, Mitutoyo 3D CNC measuring machine Manufacturer: Mitutoyo Model: BN706 Code No. 3700M-312 Type: Coordinate measuring machine Fpedpjw Hda Ijfx Aanjp Granite measuring table Measuring range: X-axis: 700 mm Y-axis: 600 mm Z-axis: 600 mm Table size: 850 x 1200 mm Dimensions: (W x L x H) 1600 x 1800 x 2600 mm Weight approx. 2600 kg Not functionally tested More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Fpedpfx Aaoxv Ampenep Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Year of construction: 1999, condition: excellent (used), Technical specifications Manufacturer: brown & sharp Type: DEA Scirocco 140907 Year of manufacture: 1999 Measuring range X = 1400 mm Y = 900 mm Z = 700 mm Equipment Renishaw PH10M indexing (tactile) probe, swiveling 7.5° - 105° Probing system TP200 + probe storage for 6 probes Software PCDMIS-2019-R2 Control panel with approximately 3m cable Calibration standard, diameter 15.875 HCU-Renishaw Controller B3C (DEA protocol) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Fpedpfjf Dvy Uox Aansp Note: Our offer is exclusively for specialist customers. (Changes and errors in the technical data, information, and prices, as well as prior sale, are reserved!)

Condition: used, Material testing station / final inspection consisting of the following main components Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels have 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), Line skip (40.3 ms) Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, only for XG/CV-5000/CV-X200/CV-X100 series Input: Forced shutdown of lighting: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (Emission frequency: 100 kHz) [Change controller settings] Brightness levels 255 levels digital [Change controller settings] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC/24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output/continuous lighting [Change controller settings] Response time (1) Constant voltage control: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation method: Max. 1 ms at 12/24 V output Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF @ 70 lp/mm (%): > 40 Image area of the object (6) with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 Fedpfjg Sxmfox Aanjpp with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7) Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete warehouse liquidation, large selection of storage shelves, pallet racking, shelving systems, vertical lift. High-quality industrial machines, lathes, grinding machines, hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 106721, Technical Data Manufacturer: ZEISS Type: Eclipse Year of Manufacture: 1999 Serial Number: 106721 Measuring Range X = 500 mm Y = 550 mm Z = 580 mm Measuring Accuracy U1 = (2.4 + L / 250) µm U3 = (2.9 + L / 250) µm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! Fedpfx Aashy Tc Uenspp We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Fpedpfszzynhjx Aansp Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0404546759, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 800 mm, total height: 2,100 mm, overall weight: 500 kg, input current: 5 A, input frequency: 50 Hz, workpiece length (max.): 1,000 mm, workpiece width (max.): 155 mm, Equipment: type plate available, Marposs – High-Precision Optical Measuring System for Crankshafts, Camshafts and Other Shafts Marposs is one of the renowned and well-established manufacturers of high-precision automatic measuring systems for a wide range of shaft types. These systems are suitable for use in both metrology laboratories and directly on production lines for quality control. Machine Description For sale is a Marposs optical high-precision measuring system designed for measuring cylindrical and eccentric workpieces, particularly crankshafts and camshafts with lengths of up to 1,000 mm. Condition and Operational Status The machine is fully functional. One crankshaft type has already been programmed, tested and calibrated. The system is therefore ready for measuring this specific workpiece type. Programming and Training Programming for additional workpieces is possible. Upon request, programming for new workpieces, measurement procedures and verification of measurement results can be carried out jointly at the seller’s or buyer’s premises. On-site training in the programming and operation of the measuring system can also be arranged. Applications - Crankshafts - Camshafts - Other cylindrical and eccentric shafts - Workpieces up to 1,000 mm in length Inspection and functional testing are possible by appointment. For further technical information or inquiries regarding programming for additional workpieces, please feel free to contact us. Fpsdo Ad R Ibopfx Aansp

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. Fpjdpfxszmr D Ee Aanop For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. Fjdpfxozmtlqs Aanepp We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.