Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Bdedpfextbcqox Aacoi Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Bsdpfx Ajxtb Efsacsdi Noise: At a wavelength:

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10404807, Professional recirculating chiller, purchased (used) via Amikon GmbH in January 2024. Always serviced and inspected by Julabo themselves. In 2025, among other things, the pump and power board were replaced. Invoices and reports are available and will be supplied. Specifications: - Type: FLW4006 (water-cooled) - Power supply: 400V, 50Hz, 3P+N+PE, 16A - Refrigerant: R452A, 700g - Capacity: approx. 4 kW - Temperature range: –15 °C to +40 °C Bdedpfjw U Exgex Aacsi - Temperature stability: ±0.5 °C - Serial number: 10404807 Condition: - In very good technical condition - Immediately ready for use - Including documentation and maintenance invoices

Condition: used, functionality: unexamined, machine/vehicle number: Miniload II, Used Leica Miniload II microscope/microhardness tester Manufacturer: Leica Microsystems Bdsdpfx Aajxr Ev Secoi Model: Miniload II Without its own lighting power supply Equipped with 50x and 10x lenses

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Bdedpfxexrnuws Aacji

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Bdjdpfxjcgy Hdo Aacji Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Clients: Doctors, therapists, cosmeticians, etc.

Condition: used, This listing is for a 2Mag MIXcontrol 20 control unit for MIXdrive The unit is in full working condition and is ready for immediate release. It is a universal control unit for connecting one MIXdrive stirring drive. Bodexrt U Ajpfx Aacsdi Speed range: 100 to 1,600 rpm. Maximum stirring power: 20 W. 4-step power setting for 25 %, 50 %, 75 % and 100 % output power — helpful when stirring large or viscous media (so you can choose “high power” vs “reduced power for continuous operation”). SoftStart feature: ensures reliable catching/centering of the stirring bar and safe acceleration at different speeds/viscosities. QuickSet: allows rapid setting of start‐ and maximum speed. Automatic memory function: remembers the last settings after power‐off, so when you power on you resume from last speed/power. Housing: Stainless steel material — robust, easy to clean, intended for intensive lab use. Interfaces: Besides standard model, versions are available with RS232, and optionally 0-10 V, 4-20 mA, USB, Ethernet, OPC UA, etc for integration into automation/data acquisition systems. This unit is designed to work with MIXdrive stirring drives of various sizes: e.g., MIXdrive 1, MIXdrive 6, MIXdrive 15, MIXdrive 60 and their high‐temperature “HT” versions. The manual emphasises that the choice of control unit greatly affects performance & comfort of the stirring drive Important: Proper matching of the stirring drive model and the control unit is required to avoid overload or damage. For instance, some smaller drives require the “eco” version.

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: Bdedpjxqnvrofx Aacji RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), Year of construction: 2020, Fully automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask type - 1-ply non-woven masks - 3-ply non-woven masks Mask size: 17.5 × 9.5 cm (adult) Output: 80 pieces/min Ultrasonic frequency: 20 KHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5–7 bar Bdjdpfx Aaou T Rydecsi Power supply: 12 kW Cycle time: 80 pieces/min High output: 100,000 pieces per day Easy and safe operation Automatic alarm system Integrated intelligent control system One-man operation The manufacturing process includes the feeding of filter material, pleating and pressing, feeding of nose bridge clips, mask forming, mask cutting, ultrasonic welding of earloops, stacking for packaging, and other auxiliary processes. Especially suitable for the production of three-layer disposable masks. Additionally, a UV unit has been installed to increase the hygiene standard, as well as a stacking device for preparation for subsequent packaging.

Condition: used, functionality: limited functionality, machine/vehicle number: 020-520.708 DMLM, Used Leica 020-520-708 DM LM Microscope with illumination Manufacturer: Leica Microsystems Bsdpfx Aaoxr Emqjcjdi Model: 020-520-708 DM LM Voltage: 90V – 250V (50-60Hz) Equipped with 4 different objective lenses.

Condition: used, Dear Sir or Madam, We hereby offer you the following device for sale: Beckman Coulter DxFLEX System B5-R0-V0 The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Bedexl Tv Hjpfx Aacjdi This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 19 October 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: excellent (used), Bruker Ultraflex Bodpfx Aaerit Inscedi TOF/TOF UT0100 G002 11 020 44 02 Mass spectrometer

Condition: used, This listing is for a IKA Midi MR1 Digital Magnetic Stirrer. We have 4 available The unit is in full working condition and is ready for immediate release. The IKA Midi MR 1 is a digital magnetic stirrer (without heating), designed for laboratory mixing tasks. It is part of IKA’s IKAMAG line of magnetic stirrers. Bodpfxsxrt Ive Aacsdi “Magnetic stirrer” here means that a magnetic stir bar inside the vessel is rotated by a rotating magnetic field created by the unit, thereby stirring the liquid. Because it doesn’t include a heating function, it’s suitable where temperature control must be handled separately (e.g. with external heating or thermostatic baths)

Year of construction: 2020, condition: good (used), FFP2 Mask Machine Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of manufacture: 2020 Mask Production Line for N95/FFP2 Masks Dimensions (LxWxH, installed): 8921 x 1494 x 1985 mm Clearance around the machine: 1500 mm on all sides 50 Hz / 2.6 kVa Pressure: 6 bar Weight approx.: 2500 kg Bjdpform R Hdex Aacedi FFP2 masks consist of 3 to 6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine is comprised of five stations: Station 1: Unwinding unit Station 2: Nose clip punching and welding, embossing roller Station 3.1: Ear loop printing and welding Station 3.2: Fold alignment Station 4: Contour welding and mask cutting

Condition: used, operating hours: 1,250 h, functionality: unexamined, machine/vehicle number: FlowFAST V18P, Used Faster-Air FlowFAST V 18 P vertical laminar flow cabinet on base Bdodpoxrtvmofx Aacji Manufacturer: Faster-Air Model: FlowFAST V 18 P Voltage: 230 V – 50 Hz Work surface: 180 cm x 61 cm x ~75 cm (width x depth x height) With electrically height-adjustable base

Year of construction: 2020, condition: used, This listing is for a Pall UF/DF Tangential Flow Filtration System. The unit is in excellent working condition and is ready for immediate release. The Pall UF/DF System is a state-of-the-art tangential flow filtration (TFF) skid designed for ultrafiltration and diafiltration (UF/DF) processes in biopharmaceutical manufacturing. This advanced stainless steel unit enables efficient concentration and buffer exchange of biologics such as monoclonal antibodies, recombinant proteins, enzymes, and gene therapy vectors. Engineered by Pall Biotech and manufactured in Germany, this system ensures process reliability, hygiene, and scalability, meeting the rigorous demands of regulated production environments. Ideal for downstream processing in pilot or GMP production, this system features a user-friendly HMI interface, robust control panel, and a fully integrated filtration circuit compatible with single-use or reusable membranes. Key Features GMP-Ready Design – Engineered to support pharmaceutical-grade UF/DF processes. Integrated Touchscreen HMI – For real-time control and monitoring of process parameters. Compact Stainless Steel Skid – Easy to manoeuvre and install in classified cleanroom environments. Automated Operation – Equipped with an intelligent PLC for pressure, flow, and temperature control. Multi-Function System – Supports both ultrafiltration and diafiltration processes. High Purity Tubing & Fittings – Configured with sanitary connections and single-use flexibility. Validated Safety Features – Includes emergency stop button, regulated pressure alarms, and lockable panels. Technical Specifications Parameter Details Manufacturer Pall Biotech (Germany) Year of Manufacture 2020 System Type UF/DF Skid (Ultrafiltration/Diafiltration) Max Allowable Pressure 4 bar (58 psi) Max Operating Temperature 80°C Min Operating Temperature 5°C Control System Touchscreen HMI with integrated PLC Construction 316L Stainless Steel Wheels Lockable castors for mobility CE Marking Yes (Compliant with EU standards) Serial Number Applications Biopharmaceutical Manufacturing – Concentration and buffer exchange for drug substances. Monoclonal Antibody Purification – Clarification and polishing prior to formulation. Gene Therapy & Vaccines – Processing of viral vectors, plasmid DNA, and mRNA. Enzyme and Protein Products – Downstream UF/DF concentration steps. Cell Culture Harvesting – Clarification of lysates and spent media. Formulation – Final buffer exchange before sterile filtration and fill/finish. Benefits Scalable Solution – Suitable for pilot-scale and full production batches. Reliable Filtration – Maintains membrane integrity and product quality. Process Efficiency – Fast changeover with user-friendly operation. Bedpfx Aasxl D Awocsdi High Product Recovery – Designed to minimize hold-up volume and product loss. Validated Platform – Developed by Pall, a global leader in bioprocessing technology.

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabinet with stand Manufacturer: Faster-Air Model: SafeFAST Elite 212 D “Technical data sheet” from the manufacturer: Useful dimensions (mm): WxDxH: 1192x580x740 Overall dimensions (m): WxDxH: 1350x855x1545 Noise level (dbA): -54 Working aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Bdodpfx Ajv Dhynjacji Weight (kg): 195 Electrical data: 230 V – 50 Hz

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Bdjdpexl Dy Nefx Aacsi Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, functionality: unexamined, machine/vehicle number: MPK5000, Used Neon invitrigen Transfection System with Pipette holder. Manufacturer: Life Technologies Model: MPK5000 Bsdpfx Aajxp I Thjcedi Voltage: 100-240V (50/60Hz)

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. Bodsxl Dx Sspfx Aacodi The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: used, functionality: unexamined, PMS Lasair II Particle Measurement System Bdodexp I Ewjpfx Aacsi Portable Particle Counter Particle Sizes Measured (µm): 0.5, 5.0 Power: 100-240 VAC, 50-60 Hz, 1.25A For sale per piece

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Bsdpfx Aaexl Dxlocjdi Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies. Bodpfx Aaoxl Dpdjcedi

Condition: used, This listing is for 1 of 2 GE Healthcare ÄKTAprocess Liquid Chromatography System 2020 & 2021. The unit is in full working condition and is ready for immediate release. The GE Healthcare ÄKTAprocess is a fully automated liquid chromatography system designed for process scale-up and large-scale biopharmaceutical manufacturing. With extensive configuration possibilities, it seamlessly transitions processes from small-scale ÄKTAexplorer and ÄKTApilot systems to industrial production. Featuring UNICORN control software, regulatory compliance, and high-performance liquid handling, the ÄKTAprocess is an essential tool for biopharmaceutical production. Key Features: Advanced Automation & Control: Automated Liquid Chromatography System: Ensures precise and reproducible separations. UNICORN Control Software: Provides intuitive process control and monitoring. Post-Purchase Configuration Options: Enhances usability and extends system lifespan. Scalability & Flexibility: Designed for Large-Scale Biomanufacturing: Supports seamless scale-up from lab to production. Customizable Configuration: Thousands of setup possibilities for different applications. Three Flow Rate Ranges: Handles up to 1,800 L/h, enabling high-volume production. Quality & Compliance: Built with USP Class VI Materials: Traceable, regulatory-compliant construction. Intelligent AxiChrom Column Packing: Ensures optimal separation performance. Full Regulatory Documentation & Services: Supports cGMP compliance. Compact & User-Friendly Design: Integrated Computer: Reduces footprint and minimizes plant clutter. Robust & Reliable Construction: Engineered for long-term operation in industrial settings. Specifications: Weight 450 kg (990 lbs) Dimensions (cm) 41L × 33W × 64H Dimensions (in) 16L × 13W × 25H Benefits: Optimized for Bioprocess Scale-Up: Seamlessly transition from small-scale systems. Regulatory Compliance: Supports cGMP requirements with complete documentation. Highly Configurable: Adaptable to diverse biomanufacturing needs. Space-Efficient Design: Built-in computer minimizes workspace requirements. Applications: The ÄKTAprocess is ideal for biopharmaceutical production, including: Monoclonal Antibody Purification Bedoxl Dn Hjpfx Aacedi Vaccine Production Recombinant Protein Purification Gene Therapy & Cell Therapy Processing

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Bedpfexhgm Rsx Aacodi Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation