Used Other metal processing machinery for sale (509)

Condition: excellent (used), Nabertherm Type: Q 200 Quenching bath Baths for quenching in oil or water as well as for cleaning and degreasing. Oil baths ensure uniform cooling of the workpieces and are fitted with lids, to immediately extinguish any ignition of the oil. An appropriate degreasing additive should be added to the water bath to clean the workpieces before tempering. Baths are supplied with batch carrier as well as inlet and outlet. Fgsln Tliotq Hf Hjzsb Bath Q 200 Internal dimensions: Width 380 mm , Depth 340 mm , Height 450 mm External dimensions: Width 550 mm , Depth 550 mm , Height 900 mm Volume 190 liters quenching capacity 25 - 30 kg/h Max. batch weight 20 kg Heating element Q 200 Connected load 6 kW Supply voltage 400 V Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Cutting and Bevelling Machine / Brand: BOST / Type: DBL / Year of manufacture: 2011 The machine can be inspected under power by appointment. The machine is in first ownership. Condition: Very good used, ready for operation (overhauled in 2016 and 2018). This machine is designed for the mechanical processing of pipes made of centrifugal casting and is fundamentally based on simultaneous machining processes, cutting, chamfering and longitudinal turning at the ends of the tubes within a variable range of longitudinal paths and diameters. The machine is made up of the following groups: - Machine bed - Synchronized heads Z II axis and W II axis - Longitudinal slide axis W and axis Z - Cross slide axis X and axis U - Support poles for lifting and supporting the YI and YII axles - Electrical and electronic equipment - Hydraulic systems Fgeln Tlisv Hfuzozeb - Pipe loading and unloading device, automatic pipe loading system. TECHNICAL DATA: - Max. diameter of the pipe to be processed: 250 mm - Min. Diameter of the pipe to be machined: 44 mm - Max. length of the pipe: 6.000 mm - Min. Length of the pipe: 2.500 mm - Max. workpiece weight: 1.5 tons - Power (turning): 2 x 22 kW - Position of the workpiece: Synchronized rotation - Machining process: simultaneous turning - Number of slides: 2 (symmetrical) - Number of steel holders: 2 (symmetrical) - Number of headstocks: 2 (symmetrical) - Number of support steady rests: 2 (symmetrical) Electrical equipment: - Drive motors: Digital series 611 - Power supply: 400 V, 50 Hz - Total connected load: 60 kVA EQUIPMENT / ACCESSORIES: - CNC control: Siemens SINUMERIK 840D - Teleservice - Self-centering chuck SCHUNK - Revolver head SAUTER - Ball screws - Gearbox - MARPOSS measuring device - Electronic handwheel - Coolant system - Chip conveyor - Device for picking up and ejecting at the ends of the tubes, for the cutting-off process synchronized with the cutting operation. - Automatic system for feeding and unloading the pipes - Central hydraulic group for the loading/unloading system - Documentation - CE marking Detailed technical data sheet and information on equipment available on request. Without guarantee of completeness and correctness the technical details and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 1999, VERTICAL MACHINING CENTER PALLETIZED HITACHI SEIKI S 50 CNC TYPE FANUC M18 X 1000 Y 500 Z 500 2 Pallets 1000 x 450 spindle 10000 rpm cooling in the center ATC 30 stations ISO 50 chip conveyor Feljvtlt Djn Tlizjgb

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. Fgeln Tliov T Tq Rozeb - 1500/3000rpm. - 380V.

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 802919, I will sell CNC LATHES - coil (made in Switzerland) ESCOMATIC NM640 Machine condition: under power, very good Type: precise fast CNC machine of Swiss type - longitudinal - Equipped with a high-speed tool spindle with 4 turning knives - Reduces labor costs thanks to longer working time using ring material, real work 24 h - The machine is fed from the ring. A roll of material can weigh 30 to 80 kg or 100-200 kg depending on the type of feeder - The material is pulled through the machine by a straightening and feeding unit - The machine can be equipped with a bar loader instead of a straightener and a roll of material - ESCO NM type machines can optionally be equipped with attachments for various side and front operations Equipment and characteristics: + The machine comes with many additional rotary, assembly and machining tools such as attachments, sliders, sleeves, etc. + The machine has never worked in our plant, it was purchased from France with a machine package and we did not install any additional elements that are originally in the box + The machine has only been checked in terms of the operation of the control with the feed mechanics and it is ok (Video - link) + Technical documentation + Box with additional equipment (photo) + Coil feeder for material 30-80 kg + Year of manufacture / Machine no.: 1998 / No. 802919 + Coil material straightener (in the machine) + Control: FANUC SERIES 21-TB - X and Z axes interpolation - Linear and circular interpolation - ISO software language - Tool radius correction - Groove threading - Rotation speeds with smooth regulation 800-1 to 2500-1 rpm + Clamps Type (SCHAUBLIN) = 80 + Sleeve 65 mm * Tool holder head: - Passage diameter: fi 0.5-6.5mm capacity - Max rotation speed 1200 rpm - Drive power 2.2 kW at 50% ED - Number of mounted rotary tools: 4 - Material cutting in the Z axis: 3.5 mm - Disc size: 7x3mm * Axis specification: - Fast forward – X (an): 15 m/m - Advance Work: X (Wfi): 0-15 m/m - Fast forward: Z1 15 m/m - Advance work: Z1 0-15 m/m - Resolution: X1 (Wfi): 1 μm - Resolution: Z: 1 μm with delay - Supplementation with additional in option: technical documents * Hydraulics: - Tank capacity: 11 liters - Power at 1500 rpm: 0.37 kW * Coolant (standard): - Tank capacity: 90 liters - Pump flow rate: 15 l/min - Fluid used: oil Fgjln Tjwdib Sslizsb * Technical characteristics: - Power supply (standard): 3x380 V AC - Power supply (option): 3x200/220/240/380...500(VA) - Frequency: 50/60 Hz - Installed power: 7 kW - Fuses: 15A (delayed) * Pneumatics: - Min. network pressure: 5 bar - Consumption: 11 mg/h * Machine dimensions: - Width: 1600 mm - Height: 1200 mm - Weight: 1100 kg - Material unwinder width: ~approx. 1500 mm * Sale: - Free loading - We provide assistance in organizing transport in Poland and Europe - The machine is in our Plant - We are selling due to reorganization of production.

Year of construction: 2010, Condition: used, Functionality: unexamined, machine/vehicle number: 1005002, Sensor-supported all-metal sorter EX Feln Tlev Evqwjizsgb

Condition: good (used), Ifsys Type: 114100 Type: VL 13 Feed system for screws Bunker system with 2x Vibroliner and 2x Vibrobunker 1x return belt 2x control unit FC 1000 Condition: used Scope of delivery: (See picture) Fgjln Tlociqi Njizsb (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2012, Condition: good (used), Functionality: fully functional, Vernet Behringer HDX918CNC CNC sawing/drilling line - HBP 410/923 year 2012 3 spindles Automatic tool changer. Felnov A Tgqe Tlizjgb 24 meters at the entrance, 18 meters at the exit. Feed measurement system by clamps. Transverse transfers at the entrance and exit.

Condition: ready for operation (used), Various small appliances and power tools for construction site use are available. 1) Approx. 20 Makita impact wrenches 6906 230V. 2) Approx. 20 Makita TW 0350 230V impact wrenches. 3) Approx. 20 Bosch reciprocating saw GFZ 16-35 AC 230V. 4) Approx. 20 Bosch GFZ 16-35 AC 230V alligator saw. 5) Approx. 20 Bosch hand planer GHO 26-82 230V. 6) Approx. 5 Fein SCW 16-6 angle screwdrivers 230V. 7) Approx. 50 Hilti rechargeable batteries B14/3.2, B14/5.2, B22/5.2. 8) Approx. 10 Hilti SFH 14-A cordless screwdrivers. 9) Approx. 40 Hilti C4/36-90 chargers. 10) Approx. 15 Hilti WSJ 750-ET jigsaws. 11) Approx. 10 Hilti UD 16 drills. On-site inspection is possible. The machines were used on a construction site. Fjlnsv S E Ekj Tlizegb

Year of construction: 2023, Condition: new, Pressure sandblaster with 2 suction FERVI The FERVI 0605 Pressure Sandblasting Machine with 2 vacuum cleaners is equipped with a pressure tank to have a greater abrasive effect, double cyclone vacuum cleaner, paper filter, front opening, and ceiling light with 3 fluorescent lamps. Useful internal dimensions 1180 x 850 x 890 h mm Maximum capacity 150 kg Working pressure 6 ÷ 8 Bar Air consumption 31 SCFM 880 l / min Gun nozzles ø 6 - 7 mm Electric aspirator 2 x 230 V 50 Hz 1.2 kW Filter capacity 5 microns Feln Tlei A Iuusizjgb Equipped with lighting Yes Overall dimensions 1800 x 1515 x 2070 h mm Net weight 245 kg Packaging dimensions 1340 x 970 x 1090 h mm

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Title Amada TOGU EU Description Tool Grinding Machine Stock No. number 01956 Available From Stock Year of manufacture 2003 Country of Manufacture Japan Easy operation Fully automated unmanned Safety active alarm system Grinding Speed 0.03-0.06mm/per/m CoolaFinish High Quality Grinding Speed 0.03-0.06mm/per/m Coolant system automatic filtration Grinding wheel CBN 150 Max tool diameter 160mm Max grinding depth in Cycle 0.99 Spindle motor 1.5 kw at 50Hz Spindle motor speed 3000 RPM Vertical traverse (mm) 200 Feed motor for vert.trav 200w step motor1/2000 intervals Feed rate -maximum ( mm.min)600 Grinding rate (mm/min) 0.06(type A-C)-0.03(D-E) Turntable motor 120 W4p Turntable motor speed 60 Coolant Pump motor 0.26 KW2p Coolant pump capacity L/min) 13 at 50Hz Machine weight 470 kg Power consumption 4.8 Serial Number D004 36 Foln Tlsvukruoizsgb Condition excellent

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG Weiss W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG Weiss W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement. Fsletmrlhsn Tlizogb

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Foljm Ak Huen Tlizegb Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Charmilles machine mod. Roboform 200 Generator selection 64 A Maximum distance between table surface (DMFST): DMFST and fixed spindle nose ITS mm 554 DMFST and fixed spindle nose mm 535 Erowa ST40 DMFST and fixed spindle nose P100/150/200 mm 540 Working spindle stroke Z-axis mm 320 Maximum electrode weight kg 200 Maximum translation amplitude (radial) mm 10 Dimensions (height x width x depth) mm 2460x1675x1610 Approx. empty weight kg 1950 C-axis Tool changer Linear # 4 positions Table and work tank: Table dimensions (width x depth) mm 560x 400 Travel; longitudinal x-axis mm 320 Transverse Y-axis mm 220 Measuring resolution μm 1 Maximum element weight kg 500 Maximum movement speed mm/min 900 "T" fixing grooves: number 3 dimensions 12 groove spacing mm 125 Work tank dimensions (useful): (height x length x depth) mm 300x970x570 max./min. dielectric level mm 270/120 front door width mm 935 Dielectric group: Capacity 290 Filtering system - No. of paper cartridges mm 4 Filling pump flow rate l/min 200 Dimensions (height x length x depth) 870x500x1610 Empty weight Kg 220 Generator, control cabinet, CNC: Working current A 64 Battery protection power supply, duration h 100 Cathode ray screen Standard Working units in inches/metric Standard Alphanumeric keyboard Standard Single Reader USB stick Standard Dimensions (height x width x depth) mm 2100x650x600 Weight Kg 270 Current supply: Supply voltage V 380 Number of phases and frequency Hz 3 from 50 Compressed air bar 6 to 7 Maximum electrical power required (complete installation) with 64 A generator: kVA 5 - with 128 A generator: kVA Fgeln Tliewcd Epszsb

Condition: used, The industrial vacuum cleaner is in good used condition. Fgeln Tlijiabxqozjb KW: 1,68 Speed: 2850 rpm

Condition: used, For sale wire bender. Feljuc Urcsn Tlizjgb The machine is in working order, please contact me.

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 12,700 mm, total width: 2,700 mm, total height: 1,800 mm, overall weight: 12,000 kg, power: 50 kW (67.98 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Established and very reliable product that capitalizes on the Profilmec group's 50 years of experience in flying cutting. Range for thicknesses from 0.5mm to 4mm and diameters from 8mm to 102mm with speeds up to 220m/min The machines are turnkey installations and the price includes the electrical and automation part including switchboard and pulpit. All the components such as electric motors and lubrication part are top quality and made in Italy or Europe. Based on your needs we will propose a cutting machine made to measure for you. A well-established and very reliable product that capitalizes on the Profilmec group's 50 years of experience in flying cutting. Range for thicknesses from 0.5mm to 4mm and diameters from 8mm to 102mm with speeds up to 220m/min. The machines are turnkey installations and the price includes the electrical and automation part including switchboard and pulpit. All components such as electric motors and lubrication parts are of first quality and made in Italy or Europe. Depending on your requirements, we will propose a tailor-made cut-off machine for you. Fjln Tlev Eywnjizsgb

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting Fgsln Tjvpalaolizsb and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Fgjlnob E I Ute Tlizeb Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 31134, Ficep Tipo D4 Punch and cut machine Year of construction: 2008 Length input: 12 Meter Length Output: 8 Meter Feln Tjt Tf I Relizsgb For more information, please contact us.

Condition: used, Gas Fired Furnaces 3080 long x 2100 wide x 2080 height These are Internal - bed sizes Gas-fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Fgjlnovit N Ej Tlizsb Both are installed and in working order. Spares available including a controller and thermocouples.

Condition: good (used), Year of construction: 2012, ■ BCS Thermo 2000 Plate cutting machine (operating range 2.000 x 6.000 mm) ■ Gantry beam (length 3.500mm) ■ Machine track (8m on both sides of the machine) ■ Plasma cutting and extraction table (2.000 x 6.000 mm, 1 pcs) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs) o IHT M4000 PCS automatic height control o Driven suspension (motor driven, including laser pointer) ■ Oxy-fuel cutting unit (1 pcs) o IHT M4000 CAP automatic height control o Driven suspension (motor driven) ■ Fume extraction unit Filtercube 4H ■ Hardware and software (including VACAM ‘Machine Edition’) ■ Safety devices (emergency stop cord) Fgjlnovpagqe Tlizob Plasma cutting unit HPR260XD Material Mild steel Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 38 mm Approx. 890 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type GCE Fit+ Ignition Automatically Max. thickness 200 mm Gas Propane Optional gas Acetylene Cutting gas O2

Condition: good (used), Year of construction: 2016, Transfer roller conveyor (length 6m, width 2.500mm, roll diameter 159mm, roll distance 800mm, line load 750kg/m, spread load 1.500kg/m) ◼ Infeed roller conveyor (length 6m, width 2.050mm, roll diameter 159mm, roll distance 800mm, capacity 1.250kg/m) ◼ Hydraulic pushers for 6m infeed roller conveyor (3 pcs, integrated in the infeed roller conveyor) ◼ V320-2000 plate processing system (base frame with vertical drilling unit, automatic tool changer, swarf brush, Fgelovpaf Ten Tlizjb oxy-fuel cutting unit, automatic discharge table and product conveyor belt) ◼ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ◼ Lifting device for feeder truck (including motor drive for infeed conveyor) ◼ Plasma cutting unit HPR260XD (including automatic height control system IHT M4000 PCS) ◼ Fume extraction unit Donaldson DFPRO6 ◼ Layout marking tool (1 pcs) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Outfeed roller conveyor (length 3m, width 2.050mm, roll diameter 159mm, roll distance 300mm, capacity 1.250kg/m) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support)

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Fslnovpafyo Tlizsgb Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Fslsvn Uv Rjn Tlizjgb Gripper Feed measuring system. Infeed and outfeed Cross Transfers.