Used other horizontal machining centers for sale (61)

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Dwjdpfxexqp Ivs Anzja Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: used, Year of construction: 2012, operating hours: 37,500 h, machine/vehicle number: IntNr231616, Dsdszggfqjpfx Anzowa

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Dwsdpezg N E Hjfx Anzea Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Djdsy Tl N Rspfx Anzowa

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Dsdpsziy Idsfx Anzswa Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Dwodpfxewhdhzo Anzsa Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Condition: used, Year of construction: 1991, KODIA Machining Center Dwodpfxjupkifo Anzja Model: B-500 Year: 1998 10kW

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 Dsdpfsw Huhcex Anzswa - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 /100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120/ 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrobroche Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18 000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrobroche Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] * Spindle type : Electrobroche Ø120 - Number of spindles : 1 - Tool holder type : HSK40 * Spindle speeds : 8710 [rpm] * Spindle power : 3.8 [kW] * Spindle type : Electrobroche Ø38 - Number of spindles : 2 - Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] - Equipment EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120 - Loader - Fire-fighting device - Fitting

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 Dwedpfxev Rgy Hj Anzea * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] Dwedpfx Anjv Rgyyezsa * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: used, TECHNICAL DETAILS - Revolver head TRH308 with turret equipped as shown on the picture * Max. power : 12 [kW] * Max. torque during machining : 250 [Nm] * Weight : 100 [kg] Dwjdjuhbwvepfx Anzea

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 Dwjdpju N Ivqjfx Anzja - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT Dedpfjuhbwisx Anzjwa - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 Dwedpfxouhbwcj Anzea - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Dwsdpsv Tvivefx Anzoa Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Cromar conveyor Synchronised tapping G00 slope constant EIA EIA 3D COMP Scaling included loading of machine included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Max load capacity: 700 kg Dwodpfx Ansy H Dnxezea Tool changer: 40 positions

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) Dwodpfxsx H Ib Ns Anzja EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Additional equipment • Pallet changer: RS4 • Tool magazine: Omron Extra Information Dwjdpfox D Hl Esx Anzea Machine still under power

Condition: excellent (used), 3-axis machining center Work area: 1350 x 2565 mm. Dedpfjzcpfasx Anzewa Workpiece clamping via vacuum pump.

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Dwedpfx Aney D Sirezja Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: used, Year of construction: 1993, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,330 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, total height: 5,800 mm, total length: 14,000 mm, total width: 4,000 mm, table width: 2,000 mm, table height: 250 mm, table length: 2,000 mm, table load: 20,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,500 rpm, overall weight: 40,000 kg, spindle speed (min.): 2 rpm, spindle speed (max.): 2,500 rpm, spindle motor power: 36,000 W, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The Lazzati HB130 is a heavy-duty CNC horizontal boring and milling machine from the Italian manufacturer Lazzati. Machines of this series are primarily used in large-scale machinery construction, turbine production, energy plant engineering, as well as in tool and mold making. Dodoytrm Ijpfx Anzjwa This machine is designed for machining large and heavy workpieces, allowing for precise drilling, milling, and tapping operations on massive steel or cast components. It features a particularly robust construction with hydrostatic guides, ensuring high rigidity and accuracy during heavy-duty machining tasks. Spindle taper DIN69871 ISO 50 Milling spindle taper ISO 60 The listed price is exclusive of dismantling, packaging, and shipping. Sale ex location; subject to prior sale. Machines are sold as used; any warranty or guarantee is excluded.

Condition: used, Year of manufacture 1997 2 grid tables Dodpew Uf N Ssfx Anzewa Working area X 3,900 mm Working area Y 1,600 mm Working area Z 200 mm Additional images available

Condition: not inspected (used), Hydromat HB32-636 Djdpfx Anji Ewr Tjzewa Manufacturer: Pfiffner Serial number: 6.07.043-7 (4.0m) Number of units produced to date: 8,960,881 Footprint: 11m x 5m

Condition: not inspected (used), Hydromat HW25-714 Manufacturer: Pfiffner Serial number: 5.07.021-1 (4.2m) Total units produced to date: approximately 7,800,000 Footprint: 9m x 4m + control cabinet Djdpsi Ewtuefx Anzjwa

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Dwedpfex S Etmex Anzoa Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)