Used tube bending machines for sale (148)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing. Lsdpfx Ajyzyh Djdtsrk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Lsdpfx Adoyzya Tjtjrk Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: excellent (used), Year of construction: 2006, pipe diameter (max.): 120 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 6 mm, bending radius (max.): 200 mm, bending radius (min.): 10 mm, overall weight: 12,500 kg, total length: 5,000 mm, total width: 2,200 mm, power: 12 kW (16.32 HP), Tube bending machine MEWAG - RB 120 A-Digi MACH-ID 9605 Make: MEWAG Type: RB 120 A-Digi Year: 2006 Max.Tube Ø: 120mm Min. Tube Ø: 10mm Max. Wall thickness:6mm Lsdey E Hu Eopfx Adtsrk Max. Bending radius:200mm Min. Bending radius:10mm Max. bending length:3000mm 3e dimsion bending:yesmm/min. Power: 12kW Number of tools: 8 Length: 5000mm Width: 2200mm Height: 1mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. Lrodpfxsy Ehrfs Adtsk *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: good (used), functionality: fully functional, pipe diameter (max.): 28 mm, bending angle (max.): 180 °, bending force (max.): 7 t, overall weight: 250 kg, Bendingcapacity: 3/8" - 2" Bending angle: 180° Revolverbending: 6-fold Attached bendingtool: Ø 28 mm Lrjdpfx Aowzchysdtsk Country of origin: The Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1.000 x 800 x 950 mm

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Lrsdpfx Ajn Smq Isdtek Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: excellent (used), Pipe bending machine Rothenberger system Bending capacity: 2 Lsdpoyv A H Eofx Adterk 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Footprint: Width: 630 mm Length: 680 mm Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Lredsy Ax U Espfx Adtjk

Year of construction: 1980, condition: used, machine/vehicle number: 80246, max. tube-Ø: 60,3 x 3,2 mm max. bending angle: 180 ° arbor rest length: 3000 mm Lredpfx Ao N Hfpsdtjk electrical connection: 380 V, 8,6 kW space needed: 2400 x 5700 x 1500 mm weight: ca. 2500 kg

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" Lrjdpfx Aedzw Hwedtsk space requirement: 850 x 640 x 780 mm

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation Lsdpfx Astr U Hlodtork → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm Ljdpfottagdox Adtsrk The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Lodpedzzyfefx Adtsrk

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm ROBOMAC 206 CNC wire bending machine General information Machine model: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / Registration: 9711026 CE marking: present Technical data Working range Wire diameter: approx. 2 – 6 mm Material feed Wire feed length: unlimited Feed accuracy: ± 0.05 mm Revolving arm Positioning accuracy: ± 0.02° Lsdeyt R Sispfx Adterk Rotation range left–right: infinite Arm length: 600 mm Bending heads Number: 2 Bending radii over mandrel: 1 to 15 mm Bending radii over roller with wire feed: 15 mm to infinite Positioning accuracy: ±0.02° Rotation range left–right: ±360° Programming time: 5 to 15 min. Time required for production changeover Without wire: 0 min With wire: approx. 30 min Power requirement: 6.3 kVA Dimensions Without safety barrier: 2.60 x 2.00 x 1.72 m With safety barrier: 4.50 x 2.00 x 1.72 m Net weight: approx. 2250 kg Typical applications - Wire-formed parts - Wire brackets - Metal hooks - Springs - Technical wire-formed parts for industrial applications Disclaimer All information is provided without guarantee. No liability is accepted for the accuracy, completeness and up-to-date nature of the technical data. Translated with (free version)

Condition: new, Year of construction: 2026, neu Lrodswirzfjpfx Adtok 2026 090209 Mai 2026, Zwischenverkauf Italien 7780 € 150.15 € 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 Lrodpfx Ajykl Rzedtok max. bending diameter: 63.5 mm smallest bending radius: 32 mm motor: 30 kW

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase Lrodpfxsu H Ibne Adtsk

Condition: used, Year of construction: 1981, 2" mm dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm weight of the machine ca. 250 kg Lrjdpfxoy Aa Imo Adtek Equipment/Accessories: - Foot switch - Mobile stand Includes a wide range of bending tools See images

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE Lredpfx Aevhc Uusdtsk AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm Shaft diameter 50 mm bending speed 4,3 m/min total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: Ljdsyvvniopfx Adtjrk - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, functionality: unexamined, Tube drawing machine with 2 stations. The machine has not been used for a while and is kept in storage. Ljdpfoyxpr Hsx Adtjrk

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Lrodpexab Hvjfx Adtok * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC Ledpfx Ajxabu Hsdtjrk total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW Lodpfxeiau Uuo Adtsrk weight of the machine ca. 6 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Ledpfxsyvhl He Adtork