Used tube bending machines for sale (147)

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Guedju H Ibnepfx Ab Uek Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Godpfxegrzuus Ab Ujuk -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8" to 3 1/4" -Dimensions: 1020/310/H170 mm -Weight: 28 kg

Condition: good (used), functionality: fully functional, Used mandreless bending machine from Ercolina Type Super Bender MOD 060 Gjdjxzgdpopfx Ab Ujuk Incl. various bending dies

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction Gusdpsx E Rdwefx Ab Ujk - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° Gujdpfxoxab E Ss Ab Uek tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Gusdexcqi Espfx Ab Uek Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180°

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: Guodsu Ibukopfx Ab Ujk - div. single and add-on parts *

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Gjdjuzlh Ispfx Ab Usuk

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC Control: PC-based Beckhoff CNC control Technical Data: - Maximum tube diameter x wall thickness: 60 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube center): 25 mm - Maximum bending radius (to tube center): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube feed length: 1000 mm - Bending direction: right - Machine weight: 7,000 kg - Total connected load: 39 kW - Voltage: 400 V / 50 Hz - Current: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed on slide rails - Automatic tube turning and repositioning unit - Electric mandrel bending device - Pneumatic mandrel rod safety system - PC control Beckhoff - Automatic central block lubrication Guedpjxzubvofx Ab Ujk - Laser scanner, safety fencing Machine condition – repair needed: The planetary gearbox of the transport carriage is defective and must be replaced. Spare parts costs according to quotation: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT – installation not included. Cheaper price – sale in as-is condition Immediate availability, including loading onto truck free of charge.

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Gusdpfxjvk Scge Ab Usk Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system Gujdpfxexaa Sdj Ab Uek - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Godpjwrt Tzjfx Ab Ujuk Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: good (used), Year of construction: 2002, controller manufacturer: SIEMENS, pipe diameter (max.): 120 mm, space requirement length: 8,000 mm, CONTROLS .. CNC controls SIEMENS TECHNICAL SPECIFICATION .. Max. diameter of tube: 120 mm .. Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8000 mm .. space requirements -front/back-: 2600 mm .. total height: 2300 mm .. total weight approx.: 16500 kg Guedpfx Ajx Dh Uhjb Ujk machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) (Ø22x2, Ø28x2, Ø38x2.6, Ø42.4x2.6, Ø48.3x2.6, Ø60.3x2.9, Ø76.1x3.2, Ø88.9x3.2, Ø114.3x3.6) Operating hours: about 40`000 hours (one ship)

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Guodpowhkf Hofx Ab Uok

Condition: good (used), Year of construction: 2001, Tube diameter 76.1 mm Max. tube feed length 4500 mm Max. bending radius 200 mm Machine weight approx. 1.7 t Required space approx. 6000 x 1000 x 1300 mm - Max. tube diameter: 76.1 mm - Max. tube feed length: 4500 mm Guodox Eivvjpfx Ab Ujk - Max. bending radius: 200 mm - Bending direction: right - Electronic 1-axis control - 2-axis measuring system - Electronic display of torsion - Electronic display of longitudinal position - Torsion angle unit with stops - Early mandrel retraction - Automatic mandrel lubrication with micro-oil dosing Accessories: - Incl. bending tools 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2D - Incl. various mandrels

Condition: new, – Capacity 42 x 3 mm – Hydraulic – Adjustable stroke – Emergency stop – With 3 tool sets 33.7 mm, 26.9 mm, 21.3 mm – Documentation – 400V Gsdjpivd Aopfx Ab Ujuk

Condition: used, Year of construction: 2004, Technical details: Gusdju Ibzkopfx Ab Ujk tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head Godpfxswrt Tus Ab Ujuk no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Gjdswvrazjpfx Ab Ueuk Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm serial number EBD mode of operation Schneiden/ Entgraden / Re speed Rollen 450 U/min m/min Gedpfxjumyhle Ab Usuk

Condition: good (used), control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Gjdpfxox Eivie Ab Usuk Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools Godpfxswivn Nj Ab Uouk *

Condition: ready for operation (used), machine for expanding and reducing tubes Gsdpfswrt Tnsx Ab Usuk 2 heads

Condition: good (used), Year of construction: 2000, Tube diameter: 76.1 mm Tube insertion length: 4500 mm Max. bending radius: 200 mm Bending direction: right Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control Gedpfx Ajx Eiuleb Ujuk

Condition: ready for operation (used), Elgo CNC controlled machine, very easy and user-friendly max tube cap: dia 76 mm x 4 mm thickness max square tube: 70 x 70 mm max radius: 600 Gedpsxpghqefx Ab Uouk bending angle: 180° Standard tooling 3D Special tooling on request Length: 1200 mm Width: 800 mm Height: 1300 mm