Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Fodpfxsz Izapj Al Sspn Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 169083, 2013 Single Sided B2 D&K Europa Laminator Installed used April 2024 refurbished with new rubber rollers and temperature sensor Fodpfx Aez E Nfusl Sspn Reason for sale - upgrading to double sided

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Fedpfez Hz Evjx Al Sepn Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, Ref:11152 . 2018 Muller Martini Presto II Latest model short makeready stitcher - Only 14,000 hours worked! Equipped with: 9 station track and chain 6 × 1551 twin feeders + 2 x hand feed 1528 cover folder feeder Fpodpfxsz Ek Iwo Al Ssn Presto II 1550 stitching unit with central operator control 2 x HK75Q stitching heads 1565 three-knife trimmer 1564 shingle delivery Specification: Max. untrimmed product: 365 × 305 mm Min. untrimmed product: 105 × 115 mm Max. trimmed product: 360 × 300 mm Min. trimmed product: 140 × 76 mm Max product thickness: 10 mm Max speed: 9,000 cycles/hour

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Fodpfx Aez Elvvel Sepn Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Fsdpoz Elvpefx Al Sepn Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Fpsdpjz D Uanjfx Al Sen Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Fodpfx Aljz Hw Tvj Sepn Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK

Condition: used, Year of construction: 2009, functionality: fully functional, Duplo 5000 PRO Booklet Maker Stitch/Fold/Trim with 2x Towers Year 2009 From a Ex Public sector Council Very low use, and low mileage. Has been on Service contract since new by Duplo UK Stitching heads 2 Collators (20 Bins) Video on request Fodpfxsz Idfhe Al Sopn Collection from my warehouse in Reading

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. Fjdpfx Aloz Ek S Aj Sepn ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2004, Ref:11162 . 2004 Kolbus Publica KM410.C High speed perfect binding line. Comprising: 15 x stream feeders with extended infeed for log loading 30 x ZU841C gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 24 clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units LH370 EVA pre-melt units 2-shot EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time Fpodpfez I Tz Sjx Al Son SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Kolbus HD152.P pile trimmer with ‘Co-Pilot’; Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr

Condition: like new (used), Year of construction: 2024, Ref: 11139 . 2024 Horizon BQ-500 PUR Ice Binder Latest model Horizon BQ binder - Like new condition! Only 68,500 books! Comprising: Fjdpfx Aloz Elufe Sjpn BQ-500 Ice binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction PUR spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Including tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr. Including accessories, tools & manuals.

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring Fpjdpfx Alez Aklao Ssn • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Fedpfx Alezyu Uys Sjpn Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification:

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Fjdpfx Aoz Akmkjl Sjpn Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Fpodpfezyu Ugex Al Ssn Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2020, Ref: 11145 . 2020 Horizon AFC-566 FKT Automated B2 size folding machine with up to 14 different folding patterns. Equipped with: Flat pile feeder Pro-Face touch screen control Computer assisted make-ready, including roller gap adjustment Sound Hood Fpjdpsz Akl Hsfx Al Sjn Digital Counter LCV-54 shingle delivery. Folding configuration: 6 Buckle plates in first station Electronic knife fold 2 x side buckle plates under knife Specification: Sheet size, Max: 558 x 850 mm Min: 128 x 148 mm Pile height, Max: 740 mm Prod. speed, Max: 42,000 sheets/hr. (A4 parallel fold).

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Fodpfx Aozpw Izjl Sopn Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Specification: Fodpfx Aljzu Divs Sepn Maximum sheet size 364 × 865 mm Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: excellent (used), Year of construction: 2016, Ref: 11137 . 2016 Horizon SPF-200L Latest model, high speed, fully automated booklet maker with A4 landscape format capability With additional trimmer for 3 sided cutting! Features: Advanced Automation – All necessary settings for a wide variety of booklet formats can be performed automatically. Even the fold roller gap adjustment is automated so very quick changeover with minimal test sheets. 10.4’’ large colour touchscreen with icon-based display for easy operation Cost Savings –works with pre-cut 4-page sheets instead of folded signatures to eliminate the folding process. Equipped with: 3 x Horizon VAC-600Ha+m+c towers (18 Bins) PJ-77R Jogger delivery for rear collation off C tower IFU-200 connecting unit Fedpjzuth Iefx Al Sspn SPF 200L Stitcher and folder 2 x 43/6-S Hohner Stitching heads FC 200L Foredge trimmer TBC-200L Top and bottom trimmer Waste paper removing conveyor PK-30 kicker LC-200 delivery Specification: Sheet Size: Max. 356 x 610 mm or 14.000” x 24.000” Min. 120 x 180 mm or 4.725” x 7.090” Sheet Weight Range: Normal Paper: 64 to 157 gsm Art Coated Paper: 84.9 to 157 gsm Stitch Thickness: Top/Side Stitch, Corner Stitch and Fold Max. 4 mmor 0.155” (About 48 sheets of normal paper 64 gsm) Production Speed: Max. 4,000 booklets per hour (A4-Finish, Portrait) Max. 3,500 booklets per hour(A4-Finish, Landscape)

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Included Modules and High-End Tools: • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Fodjz Inc Rjpfx Al Sjpn Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Manufacturer: Duplo / FKS Model: PFi Blade B2+ Category: Digital flatbed cutting plotter Year of manufacture: 2023 Condition: Like new TECHNICAL DATA & FORMAT: Fpsdpfx Aloz Rkqks Sen - Max. sheet size: 800 x 600 mm (B2+) - Min. sheet size: 210 x 297 mm (A4) - Max. material thickness: up to 1.3 mm (approx. 1000 g/m²) - Feeder: Automatic vacuum belt feeder - Feeder stack height: 100 mm FEATURES & EQUIPMENT: - Multi-tool head (cutting, scoring, creasing) - Oscillating knife for thicker materials (corrugated board, honeycomb board) - Tangential / drag knife - Creasing wheel - CCD camera system for automatic register mark & QR code recognition - Vacuum table for sheet fixing - Inclined discharge / sheet discharge - PFi Blade PC software incl. control unit

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Fpjdsz D H Nhjpfx Al Sjn Simple Automatic Setup The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm Fsdpfxewh Tq Ss Al Sepn • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2019, condition: used, functionality: fully functional, overall weight: 5,425 kg, machine/vehicle number: 3037, Scodix Ultra 202 – Refurbished Counter reading: Foil copies: 1,731,153 Total copies: 3,459,082 Specifications: Power supply: 400 VAC, 3P+N+PE; 63A x3; 50/60 Hz; SCCR: 10kA Made in Israel Year of manufacture: 12/2019 Weight: 5,425 kg Dimensions: 7880 x 1790 x 1979 mm Foil roll width: 50-500 mm Fpedpfxsz Imi No Al Son Maximum foil roll diameter: 30 cm Number of rolls that can be used simultaneously: 4 Layer thickness: 5 - 250 microns Maximum layer thickness: 700 microns Basis weight: 135-675 g/m² Resolution: 2540 x 450 dpi Maximum format: 545 x 788 mm Minimum format: 297 x 420 mm Maximum image area: 748 x 504 mm The machine is fully functional. The machine is available in Essen. Transport can be negotiated individually.