Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz Gedpsxyff Nefx Aayobt

Condition: good (used), Year of construction: 2006, Built in 2006 Size 310 x 430 x 80 mm Size trimmed 300 x 420 mm min 100 x 120 x 2 mm Feeding height max 80 mm Speed max 6.600 c/h Description: - Left hand infeed - Automatic hopper feeder for inline production Gbsdpezbkmpsfx Aayst - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Condition Cleaned good working conditon

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P Gbjdpfx Aajrf U Iijyjt • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives Gbjdotryhfepfx Aayot • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg. Gbsdpfozyz Dujx Aayet

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20A + FC-20A Booklet Maker Machine setup is via the control panel. Made in Japan. The line consists of: – Horizon VAC-100A / VAC-100M Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20A Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads Horizon FC-20 Gjdpfezyz D Uex Aayebt Cutting thickness: 88 sheets 230V power supply Weight: 240kg Touchscreen control panel for quick format changes. With a single click, you can retool the machine for a different format. 230V power supply Weight: 490kg The machine includes: delivery, PJ-77R jogging machine, operating tools, additional components, and documentation.

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Gbedpfxjy E S E No Aayet

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Godpsy E S E Aefx Aayobt

Year of construction: 2006, condition: ready for operation (used), Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible. Gedpfjyddzxjx Aayjbt

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 Gbedpfx Aajzzynbeyst - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 33 mm per printhead. Up to 3 printheads can be installed, providing a maximum total print width of 99 mm. The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.

Condition: used, Year of construction: 2017, Year: 2017 Condition: very good Gbjdezzzimopfx Aayot Counter reading: approx. 2.9 million sheets Configuration: - Heidelberg suction feeder head - Pneumatic pressure system - Pneumatic film shaft with micro-adjustment - Teflon-coated non-stick roller - Automatic sheet separation - Jogger delivery unit Technical specifications: - Maximum laminating speed: 20 m/min - Sheet feeding: Automatic - Feeding system: Heidelberg suction feeder - Feeder pile capacity: 54 cm - Sheet overlap adjustment: Automatic, PLC-controlled - Overlap accuracy: ±2 mm - Laminated sheet separation: Automatic, by cycling rollers - Paper weight: 115–500 gsm - Main roller pressure: Pneumatic - External compressor: 150 l/min, 6–8 bar - Minimum sheet size (W × L): 20 × 30 cm - Maximum sheet size (W × L): 53 × 74 cm - Maximum output: 1,650 B2 sheets/hour - Roller warm-up time: 8 min - Temperature range: 80–140 °C - Power consumption: 6,000 W - Machine footprint incl. jogger (W × L): 120 × 270 cm - Weight: 500 kg - Stacker capacity: 70 cm

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication Gbsdpezz Hg Rofx Aayjt – Safety guards – Operating tools and instructions with documentation.

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Gbsdpfezz Hf Hox Aayjt Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: good (used), Strati Anden 660A Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. This single-point machine includes a right and left gluer. Gbsdpfx Aezz Hgwsayet Year of manufacture: 2015 Width: 660mm Maximum speed: 180m/min Maximum paper weight: 600gsm Power: 4.5kW Power supply: 230V External dimensions: 750x105cm Weight: 1800kg Includes a set of documents and a pallet of small parts.

Condition: good (used), Horizon AFC-546 AKT Folding Machine Gjdpozz Hgqofx Aayjbt Fully operational, ready for production. The machine is from the first owner. Very good condition. Rollers recently refurbished. Manufactured by Horizon, Japan Equipment: 6 parallel cassettes 1 electronic knife 2 knife cassettes Maximum format: 540x760mm; min. 120x172mm The machine is set up entirely using a touchscreen control panel. The kit includes: – tool kit – additional components – user manual – compressor

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Gbedpfozz Hhnex Aayot Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Polar Mohr TR 1EL 145-3 Transomat Paper Stacker The machine is ready to use. This is the most popular design from the German manufacturer. The Transomat can be placed on the left side of the guillotine. Gbedjzz Hhuepfx Aayjt Weight: 1600 kg Power supply: 400 V Control panel. Air table. Chrome-plated table surface

Condition: good (used), Logitrans ELF1001/920 Mobile Paper Stack Lifter This device is in very good condition. Gedpszz Hfmsfx Aayobt Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery, and charger. Battery-powered. The stack lifting and lowering cycle is controlled from a mobile console that can be attached magnetically to the workstation or via the control on the device’s drawbar, ensuring fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm Lifting height: 920 mm. The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Gbedpfevfxw Hex Aayjt Format: 330 mm Equipment: cutting thickness 40 mm

Condition: used, The Iram 16, produced by Josef Foellmer, is currently in production and located in Germany. This model is equipped with a 4-head paper drill. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: Godpfx Ajvfxw Tjaysbt Equipment: 4 head paper drills

Condition: used, The Stahl T 52.3T/4-F-KB is a high-performance folder-gluer currently in operation at a printshop in Germany. Designed for efficiency and precision, this machine is equipped with four buckle plates and one knife, making it ideal for a wide range of folding and gluing applications. Gjdpfx Ajxmi Emsayjbt With a 520 mm working width, the T 52.3T/4-F-KB handles various box and carton formats, ensuring versatility for packaging production. The integrated flat pile feeder streamlines material handling, improving workflow and productivity. This folder-gluer is a reliable solution for businesses seeking consistent, high-quality finishing. Format: 520 mm Equipment: 4 buckle plates 1 Knife Flat pile feeder

Condition: used, Format: 55 x 28 cm (21 x 11 inch) Gbsdpfsxztxmex Aayot Equipment: Good condition without any damage two stitchings heads 52/8 Maximum staple thickness of 8 mm

Condition: used, Format: 0x0 Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth Gedpfx Aaex Rh D Soyjbt

Condition: used, Format: 762 x 530 mm Gbodsx N Tz Tjpfx Aayst Equipment: details on Request

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: 40 nozzles for consistent adhesive application Gbedpfxjvphzis Aayot