Condition: new, Year of construction: 2024, fuel: diesel, overall weight: 830 kg, continuous power (apparent): 60 kVA, Kawakenki KB-1317 KK60-III-SSS 60Kva Generator with Diesel Engine. Capacity 60kva 48kW. I have 2 pieces Dusljvwz Sqoqvalgot

Condition: good (used), Year of construction: 2011, 30 pcs of single phase invertors for photovolatic power plant producer SMA Germany, model SMC11000, year 2011, functional Duolqevurd Sjvalget

Condition: used, Electric generator set of 2000 KVA (SDMO - 16 cylinders) in very good condition, professionally dismantled, with less working hours (actually it was a backup for a factory) + transformer SREE 2000 KVA + full electric cabinets and management of this big power. Price on request. And we also have the Electric generator set of 200KVA Dujlqjdlumyevalgst

Condition: new, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 1024 ET - MD - MVR, EVEREST BLOWER pump Type: 1024 ET - MD - MVR Duslqvaouv Ex Njlgjt Specifications: Power: 147 BHP Capacity: 6516 m3/hour Year: 2016 Condition: new Mechanical heat pump. Mechanical vapor recompression (MVR) technology. Allows reuse of waste heat. Available with SIEMENS motor.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, pressure: 13 bar, operating temperature: 195 °C, total height: 3,000 mm, total length: 5,000 mm, total width: 2,400 mm, nominal power: 5,319 kW (7,231.82 HP), empty load weight: 13,250 kg, Equipment: documentation/manual, Viessmann Vitomax steam boiler with economiser Type: M75C231 Year of construction: 2020, steam output: 5 t/h, max. operating pressure: 13 bar Test pressure: 24.1 bar Incl. burner: Dreizler M5001 ARZ marathon - 606 - 5319 kW for natural gas Blower: speed-controlled with frequency converter, 19.5 kW electric Control: O2-controlled with lambda probe (Dreizler Burner Management System) Control cabinet with touch display BOSB - operation without constant monitoring Incl. feed water pumps, gas control system, exhaust hood and water treatment (desalination). Djlqvovn I Dujalgjut If required, also with chimney/exhaust system Complete documentation, test reports, TÜV certificates Steam boiler was taken out of service due to site closure in May 2024. The system is still fully assembled and can be viewed.

Condition: used, More technical data on request Dueljl Iir Ssqvalgot

Year of construction: 2016, Condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet Djlqohgr Ihsvalgjut 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, 3000 Used Photovoltaic Panels checked and reconditioned Dslqvajurcv Nslgeut

Condition: good (used), Functionality: fully functional, total length: 1,000 mm, total height: 1,600 mm, total width: 800 mm, type of input current: three-phase, type of motor: three-phase motor, OMS FC 350 R miter saw Specification: • manufacturer - OMS • model - FC 350 R • blade diameter - 350 mm • saw motor - 2.2 kW • max. dimensions of the cut element at a right angle 115 x 150 mm (height x width) • guards on the saw to ensure the safety of the saw operator • extraction nozzle fi 60 mm • cutting adjustment +/- 45 degrees • overall dimensions 100 x 80 x 160 cm (length x width x height) Djlqvasv Dgmyjlgjut Additional information: • the machine is in very good technical condition, ready for immediate use • the photos shown show the actual condition of the subject of sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT and transport costs

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The object of the offer is a steam boiler from LOOS U-ND 1250. Specifications: - working pressure 1 bar - oil burner - Grundfos feed pump - boiler control cabinet. Full service documentation Possibility of installation, commissioning and training in the operation of the device. Comprehensive execution, modernization of the connection and expansion of the existing infrastructure of the steam pipeline network. Construction and installation of treated feed water tanks and condensate system. Dujlqeuigg Sevalgst tel. 6o1 7o7 o62

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, Emergency generator 125 kVA - as good as new/barely used Technical data: 100 kW / 125 kVA 230/400 V Dolqstdb A Rsvalgsut Current: 180 A Frequency: 50 Hz Year of manufacture: 12/2022 Produced according to ISO8528

Condition: used, More technical data on request Dolqvol Iir Iealgout

Year of construction: 2016, Condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Duelqohgfnbovalgst Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2023, Condition: new, Functionality: fully functional, New Astronergy 420W TopCon Photovoltaic Panels, maximum efficiency, 12-year product warranty and 30-year production warranty (87% after 30 years). 20 pallets of 36 panels available: -17 pallets (36 panels per pallet) in the San Pietro Mosezzo (Novara) warehouse -3 pallets in the warehouse in Nereto (Teramo) Djlqvsupvxxealgeut

Year of construction: 2025, Condition: new, Brand new, self-propelled pile driver for solar panels by Mazaka, model MW2000 / X-5 has been designed in a compact housing - it is ideal for transport and intensive work. A brand recognized by professionals on the EU, US and Canadian markets. Self-propelled pile driver for posts of solar panels by Mazaka, model MW2000 / X-5 with rotator 360°, mast for posts 9,15 m. New Model MW2000 / X-5 with 360° hydraulic rotator. MAZAKA MW2000 / X-5 • Engine - Brand DEUTZ • Engine power 44.5 kW at 2600 rpm • Model TD 2.2 L3 HAMMER • Model MZK65, 1450 joules • Impacts 350-700 n/min • hammer weight 750 kg HYDRAULIC SYSTEM • Oil tank 200 l • Oil flow rate 50-100 liters • Oil pressure 200 bar • 100 liter fuel tank MACHINE TRAVEL SYSTEM • Speed 1 2.2 km/h • Speed 24 km/h MAX. POST HEIGHT • The height of the posts 9150 mm • Side shift 125 - 125 mm TRANSPORT DIMENSIONS • Height 2300mm • Width 2200mm • Length 4600mm • Weight 4950 kg • Column inclination + 10° / - 176° • Lateral inclination + 10° / - 10° • 360° rotator • Rotation speed 0 - 5 rpm Djlqjmv D Izjvalgeut • Hydraulic rotator system Net price with shipping costs in EU EUR 231,250.00 Equipment options at extra cost; 1. Automatic leveling system - 4 200,00 Eurot 2. Post extractor - 1 800,00 EURO net 3. Extra payment for 1 piece of head templates for profiles according to the buyer's technical drawing 1 800,00 EURO net (set - head, template for the profile, guide at the bottom) or 1 additional template for the profile plus a guide at the bottom 800,00 EURO net 4. Drill for rock, concrete, asphalt complete with 220mm drill bit and assembly DTH - WITH AIR HOSE-AIR OIL TANK+RT80+HYD MOTOR+TIJ (80CM)+DTH BID+DTH ROLLER 15 700,00 EURO net, needs compressor 14 bar / 14 m³ , deep of drilling ca. 1650 mm, speed of drilling of one whole ca. 5 -10 min. 5. Earth drill 150 X 1500 mm or 200 X 1500 with a rotating head complete – 3 500,00 EURO net 6. REMOTE CONTROL ONLY FORWARD AND BACKWARD MOVEMENT – 6 900,00 EURO net Delivery time approx. 12 weeks from the order, plus up to 7 days for transport, always to be verified at the time of order.

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, type of cooling: water, motor voltage: 400 V, nominal power: 45 kW (61.18 HP), frequency: 50 Hz, Woodgas cogeneration unit Spanner HKA45 Duelqvoviq Rtjalget Spanner BHKW-45-5.7-V1.1 (2014) Generator "ABB" 50 kW, motor GM 5,7 l, electric cabinet Combustion engine after reconstruction

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of construction 2022 only 3 operating hours incl. wheel set only self-collection possible Duolqvaju D Abwelget 4.750.-€ excl. tax 5.700.-€ incl. VAT Continuous output power (active power) 5.4kW at 230Volt / 8.0kW at 400Volt Socket version 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1x 400 V, 16 A Soundproofed diesel engine (complies with noise and exhaust emission regulations) Connections ergonomically located at the front in a control panel with voltmeter and operating hours counter Splash and impact protection thanks to full cladding Electronic voltage regulation AVR Magnetic thermal circuit breaker protects against overload and short circuits caused by faulty consumers or cables Safe personal protection thanks to insulation monitoring (appliance does not need to be earthed) Low oil shutdown Long running times thanks to 24 l large tank High level of convenience thanks to E-Start Water-cooled motor Made in Europe quality

Condition: good (used), operating hours: 72,000 h, Functionality: fully functional, overall weight: 6,500 kg, fuel type: gas, color: yellow, output current: 400 A, motor speed: 1,500 rpm, motor manufacturer: Caterpillar, Caterpillar power generator in good condition Duolqvjt N R Axealgot

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. Djlohg Rcxoqvalgeut The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: good (used), 1000 Used Aleo Photovoltaic Panels (21 pallets of 53 panels) checked and tested Djlqvaourcw Helgjut

Year of construction: 2023, Condition: new, Performance data: Continuous power (PRP) 600 kVA, engine: MTU 12V1600G10F exhaust-optimized, generator ACG, 4 pole generator LS manual, 700l tank, connection for external tank, control ComAp IG200, Duelqvaleq H H Nlsgjt acc. data sheet

Condition: repair required (used), Year of construction: 1985, Functionality: not functional, Edge press , cylinders for reconditioning Delqjuy S Nievalgeut

Condition: new, Year of construction: 2022, Functionality: fully functional, Siemens SGT 800 Gas Turbine Generator Set Unit(s) to be supplied are UNUSED, with zero running hours, NEVER INSTALLED. Gas Turbine Package: Original year of assembly: 2022-2023 SGT 800 Gas Turbine Core Engine Original assembly location: Europe Never installed AC Generator: Original assembly : SIEMENS Electrical Machines Original year of assembly: 2022. Package and core engine serial numbers will be confirmed upon placement of order The units` supporting documentation is available for review at any time with prior notice Scope of Supply: Driven unit AC Generator 11 kV 3 phase 50 / 60 Hz 4 pole 0.8 power factor Cylindrical pole brushless type Filter ventilated Class F insulation with class F total temperature rise Generator bearing temperature instrumentation Lubricating oil piping from gas turbine to driven unit Gas Turbine Engine SGT 800 Gas turbine engine – ISO Rating 45,3 MWe – two-stage uncooled variable free power turbine offers nominal shaft speed up-to E5237227 7,700 rpm Gas E5237227 generator Dolqvasv Dtuwelgout Air inlet casing Compressor rotor Compressor stator wit variable Guide Vanes (VGV) Centre casing Combustion system – Dry Low Emissions (DLE) for dual fuels Compressor turbine rotor Compressor turbine stator Power turbine Hot gas interdict Power Turbine rotor Power turbine stator Output shaft drive Exhaust outlet casing Engine arranged for hot end drive Engine bearing temperature and vibration instrumentation

Condition: used, Sell boiler from Mawera. 280 kW output. Year of manufacture 2002. Including silo discharge, buffer tank, control and expansion vessels. Delqvemkfrqjalgsut

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Duolqshgg Rrovalgjt Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana