Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Iodex Idkpopfx Ah Uetr

Condition: excellent (used), Viessmann Vitoplex 350 kW low-temperature heating boiler. Can be used with oil or gas burner. Available as heating container or heating trailer. Complete system also possible as an emergency heating unit. Itsdpfjx A Ipcjx Ah Usr

Condition: repair required (used), Year of construction: 1992, functionality: not functional, continuous power (apparent): 400 kVA, Older emergency power system from Telekom. Maintained until around 2022, after which maintenance was stopped due to a defect discovered during servicing. According to the documentation, no fault analysis or repair was commissioned. Ijdpfjxw Rb Rsx Ah Uetr

Condition: new, functionality: unexamined, power: 1,200 kW (1,631.54 HP), first registration: 05/2014, overall weight: 8,500 kg, color: grey, operation weight: 8,500 kg, Year of construction: 2014, machine/vehicle number: SE630M10AEM, Large AEM alternators, 4 units, intended for two offshore vessels that were never built due to bankruptcy. The alternators have never been used and have always been stored in a sheltered, heated warehouse. Technical details available upon request, and the alternators can be inspected by appointment. Isdjxugw Njpfx Ah Uotr

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. Itsdpfx Ajx A A Sfoh Uor The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A -Type: 6SN1123-1AA00-0CA0 -Spindle module: Type 6SN1135-1BA12-0CA0 -Dimensions: 290/50/H480 mm Iodpfopz Sgmox Ah Ustr -Weight: 6.7 kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of construction 2022 only 3 operating hours incl. wheel set only self-collection possible 4.750.-€ excl. tax 5.700.-€ incl. VAT Continuous output power (active power) 5.4kW at 230Volt / 8.0kW at 400Volt Socket version 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1x 400 V, 16 A Iedpfxju D Abwo Ah Ustr Soundproofed diesel engine (complies with noise and exhaust emission regulations) Connections ergonomically located at the front in a control panel with voltmeter and operating hours counter Splash and impact protection thanks to full cladding Electronic voltage regulation AVR Magnetic thermal circuit breaker protects against overload and short circuits caused by faulty consumers or cables Safe personal protection thanks to insulation monitoring (appliance does not need to be earthed) Low oil shutdown Long running times thanks to 24 l large tank High level of convenience thanks to E-Start Water-cooled motor Made in Europe quality

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Itsdjx Emd Tepfx Ah Ujr Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, functionality: unexamined, nominal power (apparent): 210 kVA, For more precise data, see the nameplate Ijdpfxjxn S Exs Ah Uetr

Condition: new, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Itjdpfx Ahexgbbtj Ujr Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1994, Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement. Itedoxyk Txjpfx Ah Uer

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A -Type: 6SN1123-1AA00-0BA0 -Feed module: Type 6SN1130-1AE11-OABO -Dimensions: 290/50/H480 mm Iodpfxopz Sf To Ah Uetr -Weight: 5.2 kg

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Iodpfexli I Ssx Ah Uotr Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm Ijdpfjrb E Hmsx Ah Ujtr -Weight: 10.6 kg

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: type plate available, Technical specifications: see nameplate (Figure 7) Dimensions: 1000 x 1000 x 1300 mm (L x W x H) Itsdswmptyopfx Ah Ujr The machine can be tested and demonstrated live on-site. All information is subject to change without notice. Subject to prior sale.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm Ijdpfxorb E Hbe Ah Ustr -Weight: 6.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Iodpfxerb E Hfo Ah Uetr -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Iedpfjrb E Hqex Ah Ustr -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: good (used), power converter, power supply, power pack, switching power supply, power supply, DIN rail power supply Itsdpfx Ahsubfx Dj Usr -Manufacturer: Siemens, SITOP PSU8200 Power supply DIN rail power supply -Type: 6EP3436-8SB00-OAYO -Input: 3 AC 400-500V/1.2-1.0.6A 50/60 Hz -Output: DC/24V/20A -Dimensions: 130/70/H125 mm -Weight: 1.1 kg

Condition: good (used), power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 10 Iodevbzbaopfx Ah Uetr -Type: 6EP1434-2BA00 -Input: 3AC 400- 500V 50/60 Hz -Output: 24 V DC / 10 A -Quantity: 1 piece available -Dimensions: 280/100/H140 mm -Weight: 2.0 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm Itodpfxswcyk Us Ah Ujr -Weight: 15 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available Ijdpfx Aowcyngsh Ustr -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece Itedjwcyq Ijpfx Ah Ujr

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative feedback module, monitoring module, UEB module INT/EXT. Itjdpfx Ahswc N Ive Usr -Manufacturer: Siemens, SIMODRIVE 611 monitoring module -Type: 6SN1112-1AC01-0AA1 -Number: 2x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 4.1 kg/piece

Condition: good (used), power converter, power supply, power pack, switching power supply, power supply, DIN rail power supply -Manufacturer: Siemens, SITOP PSU8200 power supply DIN rail power supply -Type: 6EP1437-3BA10 -Input: 3 AC 400-500V / 2.6-2.1.6A / 50/60 Hz -Output: DC/24 V / 40A Ijdpfjxn Irzsx Ah Uetr -Dimensions: 150/150/H130 mm -Weight: 3.4 kg