Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17367 / 15 / M, Truss manufacturing line with motorized roller table and motorized stacking trolley for automatic stacking with lifting arm To be dismantled on site Press: M115A, 20m table Ltjdpfxex Evvls Ah Uea Ejectors Details in photo Automatic truss stacker with lifter: 1 truss driver inside the workshop between the press table and the wall on the evacuation side Ability to process 3 truss thicknesses: 36-72 and 108mm, spacing adjustment by pneumatic cylinders using a switch on the control panel. 1 Outside: 1 motorized roller conveyor table 4m x 10m 1 motorized trolley for automated stacking 2 receiving trolleys with fold-down backs to facilitate the removal of truss bundles.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Ltedpsxmr Spofx Ah Uoa The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Lodpfx Aewd N Rmoh Uota Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Block Gluing Press STROMAB SL-1 4000 Maximum gluing length: 4000 mm Maximum gluing height: 1350 mm Maximum gluing width: 150 mm Number of hydraulic clamps: 8 pcs Number of gluing sections: 4 Number of frontal clamps: 4 pcs Hydraulic pump motor: 2.2 kW Lodpfxjx Nahme Ah Usta Piston rod diameter: 45 mm Piston stroke: 150 mm Maximum pressure: 180 bar Adjustable gluing height CE certificate Year of manufacture: 2008

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic Ltodpfx Asim Sffsh Usa - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, Year of construction: 2006, 4 movable beams Working dimensions: Height 269cm/ 360cm Shoe width 100mm 30mm diameter cylinders Double-acting cylinders Vertical cylinder stroke 150mm Horizontal cylinder stroke 100mm Hydraulic locking shoes Ltodsxu Ddajpfx Ah Uja 1.73kW pump 160 bars of pressure 380V

Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Ltjdsxftcaopfx Ah Uja

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Ljdpfx Ahexmr Rxe Usta Powered by a hydraulic unit.

Condition: excellent (used), Hot Platen Press with Medium Heating Platens Pressing area 2750 x 1300 mm Number of press cylinders #6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic Hot Platen Press Down-piston design Medium heating plates - for connection to the central hot water supply Pressure continuously adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety ripcord Rack compensation Main switch Automatic opening Ltsdpsvzq Rkjfx Ah Uoa Stroke limiter CE NEW AL cover plates

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Lodexvitijpfx Ah Ueta Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7559 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x4 pcs - Pneumatic vertical clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions L/W/H: 4270x1600x2000 mm - Weight approx.: 800 kg ADVANTAGES Ltjdev Dirxepfx Ah Uea – Two working fields – Gluing length 3300 mm – Pneumatic cylinders – Used press, in very good condition Net price: 10,900 PLN Net price: 2,600 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Steblo PTJ trapezoidal pneumatic press. The press consists of two elements; it is possible to purchase a single section with a width of 3000mm. Ledpfx Ahsx Ihure Usta Height: 900mm Width: 6000mm Maximum thickness: 110mm 8 clamping cylinders 12 leveling clamps Weight: 1560kg Very good condition, ready for operation.

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Ltjdsxy Tl Dspfx Ah Uoa Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: new, Year of construction: 2021, machine/vehicle number: MR004301, Manually operated glue presses with a maximum height of 1800 mm. The price is for a ready-to-use unit, ex Staphorst. On-site delivery is available at an additional cost. The press is equipped with the following options: - Manual pressure unit at the front Technical specifications: - Clamp cylinder stroke: 60 mm Lsdpevcy Emjfx Ah Ujta - Wheel set: Yes - Maximum length: 2500 mm - Maximum height: 1800 mm - Number of vertical pressure bars: 4 - Maximum cylinder pressure weight: 450 kg - Serial number: 8877

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Ledpfxjxgg Tbe Ah Uota Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil Ltodpexvp Rhsfx Ah Uea List of refurbished parts: - 7 new bearings - 2 new wear rings Dwjbngmhexd U Izsd Eed - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic Ltodexa Ephspfx Ah Usa - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Lodpfx Asxzfw Uoh Ueta Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: good (used), Code: 0037 Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Ltsdpfx Aov Ab Dweh Uja Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 Lsdpoh Tm A Ejfx Ah Ujta - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Ltedpetgq Ibsfx Ah Usa Installation depth approx. 1300 mm 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: • Errors in technical specifications and subject to prior sale. • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: good (used), Year of construction: 1983, functionality: fully functional, Bürkle U60 veneer press hydraulic Year of manufacture: 1983 The press comes from a training workshop and is in good condition. Press area: 2200 x 1250 mm Opening height: 400 mm 4 cylinders, pressing force: 600 kN Connected load per heating plate: 7 kW Weight: 3000 kg Dimensions: 2750x1380x1785 mm Lodpfx Ahox Af Sbj Uota

Condition: excellent (used), CATALOG NUMBER 6933 TECHNICAL DETAILS - loading areas: 1 - front: manually adjustable clamping beams, 6 pcs - top: pneumatic pressing beams, 4 pcs - length of each pressing beam: 795mm - side: pneumatic clamps, 2 pcs - max length of glued components: 3300mm - max height of glued components: 1300mm - max thickness of glued components: 170mm - dimensions (L/W/H): 4200x800x1960mm Lsdpfek Uxwwjx Ah Uota - weight: 820kg ADVANTAGES – manufactured in Poland – mobile – unpainted – used press, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: as good as new (ex-display), Demonstration Machine The new 70F briquetting press from Holzprofi impresses with its sophisticated, simple, and robust design. The press is designed for commercial and industrial applications. Made in the EU! Technical data: Motor output (continuous duty): 7.5 kW Briquette diameter: 70 mm Power consumption approx.: 4900 W/h Output capacity: 60–80 kg/h Chip hopper: 0.75 m³ Weight: 810 kg Briquette density approx.: 900–1100 kg/m³ Sound pressure level: less than 70 dB Dimensions: 2220 x 1200 x 1510 mm Standard special equipment: Automatic shaft rotation direction reversal Automatic shutdown Sample image! Price subject to change. Errors and omissions excepted. Ltsdpfx Aovr I N Seh Uoa

Condition: excellent (used), Pressing Area: 2500 x 1300 mm Number of Press Cylinders: 4 Total Pressing Force: 90 t Operating Voltage: 3 x 400 V + N, 50 Hz Total Connected Load: approx. 20.3 kW Space Requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3,600 kg Hydraulic Heated Platen Press Under-piston Design ELKOM Electric Heating Plates Pressing Pressure steplessly adjustable via pressure switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating elements Analog temperature display for both heating plates Emergency stop safety cable Ltodpfjrivrwox Ah Usa Rack and pinion equalizer Main switch CE-compliant NEW ALUMINIUM COVER PLATES Note on Used Machines: • Subject to errors in technical data and prior sale. • Quoted prices are ex location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. The buyer is welcome to inspect the machine on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)