Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Dsdjgl Nlmspfx Aaaocf Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) Dsdpfx Aajd Nm Sieaecf * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Dcedpexfwdjfx Aaaof Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Dcodsd Nnwlopfx Aaaef Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Dcjdpfx Ajyw Aicsaaof Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: as good as new (ex-display), Year of construction: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine Including control cabinet with timer operation The press is switched on manually and will run until the set time on the timer (e.g. 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square), Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H), Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V, 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% ATRO - Sand, stones, metals, and minerals increase wear --- Optional upgrades (at extra cost): Dcsdpfx Aasfci D Ajajf - Timer function + €490 net Machine is started manually and switches off automatically after preset time X. - Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt version Motor then 3 kW instead of 2.2 kW Surcharge + €690 net (delivery time approx. 8 weeks) ---

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Dcedpsh Txl Iefx Aaaof Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm Dcodpokd Drhjfx Aaaef 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: used, pressing force: 65 t, table width: 1,100 mm, table length: 2,200 mm, total length: 2,600 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 2,800 kg, empty load weight: 2,800 kg, cylinder diameter: 80 mm, opening width: 300 mm, plate width: 1,100 mm, space requirement height: 2,000 mm, space requirement length: 2,600 mm, space requirement width: 1,300 mm, transport length: 2,600 mm, transport width: 1,300 mm, transport height: 2,000 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Dcjdpfoyfw D Aex Aaaof Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2025, New demonstration machine! MOVE — the high-precision vacuum press with gigantic usable area for vacuum lamination and vacuum veneering of curved workpieces. Offers extensive flexibility thanks to absolute mobility and a revolutionary folding mechanism that reduces the footprint to 45% when folded. High-precision vacuum press with folding lid, including: - Revolutionary folding mechanism (reduces footprint to 45%) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) by BECKER - Optional automatic shut-off when pressure is reached (especially for large vacuum volumes) - Pressure regulation: 400 to 900 mbar, analog vacuum gauge - Highly elastic natural rubber membrane (up to +130 °C) - Quick-change membrane system - Robust phenolic resin work surface (up to +120 °C), 15-ply bonded - Gas struts for lid opening - Vacuum gauge Djdjyi Hd Hjpfx Aaajcf - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrical components Technical specifications and dimensions: - Usable area: approx. 3050 x 1350 mm - Inner frame dimensions: approx. 3130 x 1430 mm - Total dimensions: approx. 3700 x 1700 x 1100 mm - Total dimensions (folded): approx. 3700 x 770 x 1780 mm - Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz - Weight: 670 kg Location: Rieth

Condition: used, Technical specifications: Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm Djdpfoyv Atrox Aaaocf

Condition: excellent (used), functionality: fully functional, Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Dcjdpfx Aajyvtypeaof Clearance 400 mm Water heating

Condition: used, Technical data: Total gluing length: 14 meters Two independent sections with separate controls: 6 m/unit and 8 m/unit Hydraulically operated clamps 12 vertical clamps 28 horizontal/rear clamps Power supply: 400 V Dcsdpfx Aaox Id Dijaof Total motor power: 15 kW Possibility to purchase the 6 m and 8 m sections separately. Overall dimensions: Length: 18,000 mm Width: 1,200 mm Height: 2,500 mm

Condition: used, Year of construction: 2004, functionality: fully functional, ORMA NPC-4-70 Shelf Press – after technical inspection, ready for operation Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm • Max. clearance between shelves: 480 mm • Shelves are straight, clean, with no dents/damage • 4 cylinders with 70 mm diameter • Max. pressure: 300 bar • Max. pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves convertible for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with safety pull-cord • Original paint finish • Weight approx. 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Dcjdpjyxdlusfx Aaaef Additional Information: • Good technical condition, after complete seal replacement • Photos show the actual item for sale • Possibility to power on and inspect the machine on site • Auction price excludes VAT and transport costs Financing & Transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing options available through leasing or lease-loan arrangements

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s Dodpfx Aoymnz Uoaaocf - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: good (used), I sell a pneumatic press. Dsdpsun U Uiofx Aaascf

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023 Features and technical data: Dedpfx Asyf R Alsaaocf - Machine body: robust, torsion-resistant steel construction - Membrane frame: opening/closing with gas pressure cylinders - Swivel castors: removable, 360° rotatable - Vacuum press pressure: 0.85 kg/cm² (8.5 t/m²) - Vacuum table: 3.68 m²; 31.28 t - Membrane: natural rubber 3100 x 1500 mm - Usable area: 2920 x 1320 mm - Material thickness: 2 mm - Colour: grey - Material hardness: 53 Shore A - Tensile strength: 26 MPa - Elongation at break: 690 % - Temperature resistance: max. +130°C - Pressing surface: 2920 x 1320 mm - Becker VT 4.40 rotary vane vacuum pump, 40 m³/h - Power requirement: 1.25 kW Dimensions: 3200 x 1400 x 1000 mm Availability: short-term Location: 63934 Röllbach

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Dcedpfeu Rp Hmox Aaaof

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Dedpjxd Auijfx Aaascf

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Dcodpfxsqd Uy As Aaaef Total power: 33 kW

Year of construction: 2024, condition: new, functionality: fully functional, Hydraulic pressure gauge, pressure indicator 500 bar Application: - shelf presses Dcsdpfethiddsx Aaaef Specification: - indication range from 0 to 500 bar -max working pressure - 300 bar - large display with a diameter of 116mm - fi inside 104mm - depth without valve 57mm - depth with valve 97mm - additional contact for automatic pressurization to the preset value Additional information: - the photos shown illustrate the actual condition of the object of sale - the price given in the auction is a net price

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry operations. It offers a robust construction while providing solid performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service available directly from our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean, high-calorific fuel without the need for binders. These machines are characterized by compact space requirements, low energy consumption, and easy operation. Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h (depending on material) Djdsvva Rpepfx Aaascf - Briquette diameter: 60 mm - Briquette stroke length up to 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles/min - Dual manometer for improved pressure monitoring - Level sensor for the height of briquetted material - Oil level sensor - Inspection window - CE safety standard compliant - Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Condition: used, CPM 9042-12 granulator with many spare parts Dodpfxow Saayo Aaascf

Condition: excellent (used), Pellet line The line consists of: - CPM 7932-5 355kW granulator - Palletizer with automatic TMG wrapper - Essegi automatic packaging machine - Tanks and transport system consisting of many redlers and screw feeders - 355kW GT Zesor AG Beater Mill - Control cabinets - High-capacity sawdust sifters - Pellet sifter - Redlers and screw feeders Line with full documentation Dodewcdndopfx Aaajcf Line serviced until the end of operation with many spare parts

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator The machine has no door Dcjdpfx Aajwdawqeaof It worked on a cake