Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 2. PRESCONTAINER LM10ASG, YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 Guedpfx Asz Hclkslbei 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST!

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Channel baling press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-way automatic Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. Godpfx Aj Aid R Uslbeui The sale is made against prepayment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Gjdpsxy E Evsfx Albsui Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: used, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) Guodjym Uxtepfx Alboi - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Bramidan 4-0F Engine: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Pressure: 18 tons Weight: 1580 This machine is used to reduce the volume of waste such as film, paper, etc. Price: 4800 EUR Aventek MK 2500 baler This is an industrial baler for compressing waste such as: film cardboard / paper plastics pressing force: 25 tons bale weight: 400 kg, depending on the material bale dimensions: approx. 1200 × 800 × 800 mm cycle time: approx. 50 s power supply: 400 V engine power: approx. 5.5 kW Year: 2013 Price: 6800 EUR ORWAK 9020 baler: - 2.2 kW motor - 380V - 20-ton pressure Guodpfx Alev Ai Uqobji - bale dimensions: 1100x700x800 - bale weight: depends on the raw material, 200-300 kg Price: 5500 EUR

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Gedsv Akmzopfx Albjui Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, total width: 1,200 mm, total length: 4,800 mm, total height: 2,190 mm, operating pressure: 220 bar, warranty duration: 3 months, overall weight: 6,800 kg, Reinforced for processing ferrous materials. Includes a crushing device at the end of the jaw to process bulky objects. TECHNICAL CHARACTERISTICS – Blade length: 750 mm – Clamping: hydraulic – Clamping length: 700 mm – Control: automatic, semi-automatic and manual, with safety pedal, according to CE standard; 3 emergency stop switches – Power supply: 440 Volt – Electrical power: 30 HP – Cutting capacity: solid round Ø 80 mm (St37) – Work table height: 1170 mm Guodpfx Alez D Tttoboi – Oil tank: 1000 liters – Number of strokes: 10 to 30 strokes per minute – Pump: self-regulating hydraulic pump – Control unit: automatic – Dimensions: 4,800 x 1,200 x 2,190 mm – Weight: Approx. 6,800 kg

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Guedpeyim Ayofx Albji Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Manufacturer: Strautmann Type: PP 1207 Plus Bale dimensions (L x W x H): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (L x W x H): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Capacity: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Gjdpfxjv Aiymo Albsui Installation location: sheltered indoors/outdoors Noise level: less than 80 dB(A) I also have Strautmann PP 1207 balers, model years 2009-2011, price €5500. I also have Strautmann PP 1208 balers, model years 2014-2015. Strautmann AutoLoadBaler, model years 2018, price €6500.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Godoz Aaggopfx Albsui Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2019, very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Gujdpfxjz H I Eve Albsi Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, Styrofoam, non-woven fabric, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Note: The machine is in very good condition. It has been inspected and tested by us. The video can be found on our website or our YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Gjdpsz Hbzqofx Albeui Price on request!

Condition: like new (used), complete briquetting system, from automatic feeding to packaging press, 30 kW Gedpfx Asz Ritwelbeui

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Guedpfxeyuyg So Alboi Wire coils platform : Not included.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. Guedpfsyu Stkex Albji The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MM1007, bale length: 880 mm, bale height: 600 mm, pressing force: 500 t, Taurus shear baler model E 556.P, year 2015, in excellent working condition and complete with documentation. This machine is ideal for baling and shearing all types of ferrous scrap: profiles, sheet metal, bulky mixed scrap, and vehicles. Technical data Shearing force: 500 tons Shearing width: approx. 950 mm Shearing height: approx. 640 mm Box length: 5,600 mm Open box width: 2,400 mm Bale size (closed): Width: 880 mm Height: 600 mm Features Soundproofed 125 HP diesel engine Operator cabin Gedpfjy Iblwsx Albeui Radio remote control Complete documentation Machine ready for operation.

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Guedem Amk Nopfx Albsi Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Condition: used, operating hours: 1,828 h, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, Year of manufacture: 2016 Colour: Blue Empty weight: 10.000 kg Guedpfe Afy Sqsx Albji - Year: 2016 - Serial number: 61700170 - Operating hours: 1828 - Transport dimensions: 9200mm x 2300mm x 3300mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: unexamined, machine/vehicle number: 10 046, Model: RB 2.2/700/60 S / Dimensions: approx. 4 m high Manufacturer: RUF Machine No.: 10 046 Gusds Aht Ttjpfx Alboi as shown in the picture without any other items shown Note: If technical or electronic devices are included, their functionality has not been tested. Note: Pallets are included as part of the item, if shown in the picture. This RUF RB 2.2/700/60 S briquetting press is being auctioned online in our industrial auction / machine auction “Closure of a well-known printing company: printing machines, extensive printing machine accessories, production technology, spare parts, conveying technology, workshop and operational equipment as well as storage and office furniture.” You will find this and many other items from the areas of equipment & machines, production equipment, and workshop equipment on our platform.

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Cardboard Film PET bottles Foam Cans Gsdpov Aktnefx Albsui Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Gsdpfx Aoy Tnzcelbjui Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Gusdpfx Alsyq Ngtsbei

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Guodpfjzxqnmjx Alboi Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Gsdpfjra Ak Eox Albeui Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of a single bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m long, 2.5 m wide, approx. 2.6 m high Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Guedpfsra Dddex Albsi Design features: large opening for loading cardboard option for automatic feeding (e.g., with a conveyor) manual wire binding (4 wires) pallet locking and hydraulic door for bale removal Advantages of this press: large bales = fewer transport trips high crushing force designed for continuous operation Available production years: 2017-2018