Condition: used, Objet Stratasys Duslijry Uhhenvdust Objet30 Prime V3 + cleaning glovebox Technical data: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294× 192× 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material and post-processing method Model materials: Transparent, solid (VeroClear) Solid, opaque, white (VeroWhitePlus) Solid, opaque, blue (VeroBlue) Solid, opaque, black (VeroBlack) Solid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: gebraucht / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax

Condition: used, - no description available - Dslisv N Ntasnvdujut

Condition: new, Year of construction: 2024, machine/vehicle number: 05004100140, Drying and Burn-in Furnace TRO, Model III For drying racks with max. 50rods, useable size 100x140cm, outer dimensions: approx. 2520mm wide x 1870mm deep x 2300mm high, useable space: approx. 1700x 1350x 1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539 (max. permitted solvent quantity: 110g per charge). Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: 1,000kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Delinvoh Tytbjdueut Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: refurbished (used), EOS P385 printer, fully inspected and refurbished! Supplied with 2 building frames and water cooler. Technology: SLS Materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, etc. Construction volume: 320x 320x 620mm Laser model: synrad 48-5, 50W CO2 laser All materials unlocked and parameter editor! We can take care of the transport and installation. Warranty and maintenance plans available. More information available on request. Dolinvdon R Nikjueut

Year of construction: 1978, Condition: used, Built in 1978 Cutting width 1.550 mm Feeding height max 165 mm Feeding depth max 1.550 mm Front table length 750 mm Table height 900 mm Equipment • air table • side table right • side table left • light barrier Dolijb Hilnonvduout • optical cutting line indicator • automatic hydraulic knife changing • 2 knives condition: machine is not complete, only for spare parts!

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Duoledkp D Hjinvduot Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: used, We are looking to buy: SLS printers from EOS, among others, other brands are also welcome. Models like P100, P110, P385, P390, P395, P396, P700, P730, P760, P770, P800, P810 etc Any condition is welcome Doliekq H E Tjnvdueut Do you have something? Then don't hesitate to contact us!

Condition: used, Year of construction: 1989, machine/vehicle number: C 1092-D, 457 x 292 mm; 6,000 c/h; Size: max. untrimmed: 457 x 292 mm; max. trimmed: 445 x 279 mm; min. trimmed: 178 x 102 mm; Dolinvjb Hpqwjdueut

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Djlijqzgvhjnvdujut Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Djlinoc Idi Rjvduout Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Duoljuif Izeinvdust Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Duolinjubxkmjvduot Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Duolinvjnkalgjduot Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Djlinvsqy Edysdusut Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Formlabs Type: Form 3BL Technical specifications: 3D printing technology Low Force Stereolithography (LFS) Minimum dimensions for easy access (W × D × H) 90 × 96 × 104 cm Printer dimensions (W × D × H) 77 × 52 × 74 cm Printer weight 54.4 kg Build volume (W × D × H) 33.5 × 20 × 30 cm Layer thickness (vertical resolution) 25-300 microns XY resolution 25 microns Laser spot size (FWHM) 85 microns Resin cartridges 2 Resin dispensing system Automated Biocompatible materials: Yes Support structures Automatically generated Light touch removal Ambient temperature 18-28 °C Low Ambient humidity Operating temperature Automatically heats to 35°C Temperature control Air-heated pressure chamber Power requirement: 100-240 VAC Maximum 8.5 A 50/60 Hz 650 W Laser specifications IEC 60825-1:2014 | EN 60825-1:2014 Class 1 laser product 2 Light Processing Units (LPUs) Each Light Processing Unit (LPU) contains: Violet 405 nm laser Maximum 250 mW Emissions Information The Form 3BL is a Class 1 laser product. Accessible Emissions are within Class 1 limits. Connectivity Wi-Fi : 2.4 GHz, 5 GHz Ethernet : 1000 Mbit USB : 2.0 WLAN connectivity Protocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz, 5 GHz Supported security protocol: WPA/WPA2 Ethernet connectivity LAN port RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T). Connection via a shielded Ethernet cable (not included): at least Cat5 or Cat5e or Cat6 for 1000BASE-T USB connectivity USB-B port (Rev. 2.0) with a USB-A-B cable Noise emission Does not exceed 70 dB(A) Printer control Interactive touchscreen Notifications Touchscreen notifications, SMS/email via dashboard, Two LED status lights, speaker for notification sounds Dslinvdet E Splsusut Print preparation Desktop software PreForm File format STL or OBJ Accessories: Building platform BP-F3l-01 Cleaning tool CT-F3L-01 Resin tank 2 available (one unused) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions for you over the phone. Written orders can be placed by email or fax

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A Dslinvdsgqux Nouout MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. Dslishb Dtpenvdujut The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Delinvdeft R Swjuout Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Dujlijk Hz Nqenvdujt Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Doliou Ebt Uonvdusut Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2009, Condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Dslinvdjd Sukxouout

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Deloqzgvasinvdueut Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Duslsivpdwsinvdujt Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Dolineu Ebufjvdusut Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), DMG Mori Here we offer you a selective laser melting machine. Technical data: Construction volume: 300 x 300 x 300mm Layer thickness: 20-100 µm Materials: tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448x580x132 mm kg: 40 Cooling: water Central wavelength range: 1070 ±10 nm Djlinvdju Ebv Aeusut Modulation frequency: 0-50 kHz Average power, max. 600 W Power rotation: 10- 100% Beam parameters: 0.37 mm x mrad Type: LASERTEC 30 SLM Condition: used Scope of delivery: (See picture) (Technical data is subject to change and errors, information is subject to change!) We will be happy to answer any further questions you may have over the phone.