Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Dsb Hafonkalge Ehekl Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, MPS EF 430 Year of Manufacture: 2006 _____ Product Description: • Webwidth: 430mm • 8 x Flexo Printing Units • Rewinders • Unwinder • Web Path Extension with Heater • Anti-static bar single • Web break control • Corona treatment • Combi Slitter Scissors Dobowaafyo Haf Ehjkl • Web turner unit including backside reading • Lamination unit • Automatic register control • Cooling roller unit • 8 x UV Dry Sation Air Cooled • Infeed Unit 900 Machine Specifications and Equipment: _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Year of construction: 2001, Condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Dkjb Haf Ejwabbvohel The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: used, machine/vehicle number: 96102, Baier Geba 45/A, machine number 96102, 2-color foil stamping, plus 1 station for die-cutting, 2 stations for foil stamping, 1 station for die-cutting, working width 14 x 14 cm, automatic feed, in good condition, immediately available. Deb Hov Ukg Esaf Ehekl If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: refurbished (used), EOS P385 printer, fully inspected and refurbished! Supplied with 2 building frames and water cooler. Technology: SLS Materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, etc. Dsb Haen R Nikef Ehskl Construction volume: 320x 320x 620mm Laser model: synrad 48-5, 50W CO2 laser All materials unlocked and parameter editor! We can take care of the transport and installation. Warranty and maintenance plans available. More information available on request.

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Max: 100 - 200 books/hr. (one-off production) Dob Haf Eou Tky Rehjkl

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used Dkebjqy Edye Haf Ehel (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2011, 10 UV Flexo Gymnastics bar Coldfoil corona etc. Dob Hjwaadvsaf Ehekl

Condition: used, We are looking to buy: SLS printers from EOS, among others, other brands are also welcome. Models like P100, P110, P385, P390, P395, P396, P700, P730, P760, P770, P800, P810 etc Djb Haf Eekq H E Tjhskl Any condition is welcome Do you have something? Then don't hesitate to contact us!

Condition: excellent (used), Year of construction: 2006, Ref:10880 . 2006 Uchida LA-2 Paper Drill. Two head paper drill with accurate, easy operation and safety. Features: Twin push button or foot operation Dsb Haou A Svbjf Ehokl Table lift action Electrically operated stroke mechanism Independently adjustable drill heads Waste extraction Specification: Table size, Max: W.1000 x D.470 mm Pile height, Max: 65 mm Back margin : 5 – 65 mm Drill bit diameter, Max: 3 – 14 mm Head distance : 65 – 330 mm Electric supply : 220-240V, 50/60Hz

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Dksboubxkms Haf Ehol Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2010, Ref:10883 . 2010 Solema ‘Giove’ Book Stacker. Compensating counter stacker for books. Comprising; Positive tape infeed Separating and counting system Electronic programming of stack Adjustable speed ejector Configured for delivery left or right Twin delivery tables with motorised rollers. Specification: Book size, Max: 450 x 350 mm Min: 100 x 140 mm Intake thickness, Max: 80 mm Pile height, Max: 280 mm Infeed height : 700 to 1350 mm Dkjbsu A Stgs Haf Ehel Mechanical speed, Max: 7,000 cycles/hr. Air required : 220 nl/min. 6 bar (separate compressor or in-house supply required).

Condition: used, Formlabs Type: Form 3BL Technical specifications: 3D printing technology Low Force Stereolithography (LFS) Minimum dimensions for easy access (W × D × H) 90 × 96 × 104 cm Printer dimensions (W × D × H) 77 × 52 × 74 cm Printer weight 54.4 kg Build volume (W × D × H) 33.5 × 20 × 30 cm Layer thickness (vertical resolution) 25-300 microns XY resolution 25 microns Laser spot size (FWHM) 85 microns Resin cartridges 2 Resin dispensing system Automated Dsbst E Splo Haf Ehjkl Biocompatible materials: Yes Support structures Automatically generated Light touch removal Ambient temperature 18-28 °C Low Ambient humidity Operating temperature Automatically heats to 35°C Temperature control Air-heated pressure chamber Power requirement: 100-240 VAC Maximum 8.5 A 50/60 Hz 650 W Laser specifications IEC 60825-1:2014 | EN 60825-1:2014 Class 1 laser product 2 Light Processing Units (LPUs) Each Light Processing Unit (LPU) contains: Violet 405 nm laser Maximum 250 mW Emissions Information The Form 3BL is a Class 1 laser product. Accessible Emissions are within Class 1 limits. Connectivity Wi-Fi : 2.4 GHz, 5 GHz Ethernet : 1000 Mbit USB : 2.0 WLAN connectivity Protocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz, 5 GHz Supported security protocol: WPA/WPA2 Ethernet connectivity LAN port RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T). Connection via a shielded Ethernet cable (not included): at least Cat5 or Cat5e or Cat6 for 1000BASE-T USB connectivity USB-B port (Rev. 2.0) with a USB-A-B cable Noise emission Does not exceed 70 dB(A) Printer control Interactive touchscreen Notifications Touchscreen notifications, SMS/email via dashboard, Two LED status lights, speaker for notification sounds Print preparation Desktop software PreForm File format STL or OBJ Accessories: Building platform BP-F3l-01 Cleaning tool CT-F3L-01 Resin tank 2 available (one unused) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions for you over the phone. Written orders can be placed by email or fax

Condition: excellent (used), Year of construction: 2008, Ref:10870 . 2008 Sigloch Book Preparation & Kolbus BF512 Casing-in Line. Short make-ready, compact, casing-in line for books with hard, flexible or plastic covers. Kolbus Compact BF512 Casing-in element with 'Co-Pilot' computerised set-up and memory Comprising; Sigloch Twin end sheet pasting unit Sigloch BBL-30/3 Back Gluing and Lining; Sigloch NG60/2 double Nipping Press Conveyor and Cooling / Drying System to Kolbus HD130 three knife trimmer to; Kolbus Compact 512 Casing-in element Comprising; 'Co-Pilot' computerised set-up and memory with touch-screen colour monitors HB 530 Spine warming conveyor ‘AR' rounding and backing element with various size rounding irons to; ‘HL' backlining unit with hot gluing, paper lining and head & tail banding ‘EMP' casing-in element with DBA case bending unit, heated former for cases, various formers for size changing, Robatech hot-melt spine joint gluing. 'FE' pressing and building-in machine. Delivery belt to:- Sigloch BSD-60 book stacker Including accessories, tools & manuals. Specification: Book block format, Max: 385 x 315 x 80 mm Min : 105 x 105 x 6 mm Open case size, Max: 660 x 385 mm Min: 210 x 105 mm Mechanical speed : 10 - 30 cycles/min. Dkeb Hafjt Dpdke Ehel

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Dkjb Hsk Hz Nqoaf Ehsl Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2008, Ref:10792 . 2008 Muller Martini Ventura ‘Connect’ Book Sewing Line. Complete gathering & sewing system with minimum staffing levels. Signatures are gathered, stacked and then turned into thread-sewn book blocks. Comprising: M.M. 3693 Gatherer 18 stations with 2 x hand feed positions • Automatic hoppers with vibrator & jogging adjustment • Hopper feed with suction & gripper action • Automatic stacking & clamping system of gathered blocks • Automatic dual track loading system for sewer feeders • Automatic interface with Ventura book sewers. 2 x Ventura automatic book sewers; Features include; • Max. working width 51cm • High range of product sizes • Papers from 28 gsm • Feeder and/or knife opening • Innovative sewing system • Patented loop formation with compressed air • Quick change between different type of stitches Automatic feeder with either sword or suction opening Computer programme - with alpha-numeric display, memory capability and moveable TV monitor. Touch screen-operated Commander control system Optical scanning system built into the saddle, checks the opened signatures from the inside for correct sequence and proper opening. D/C drive unit Standard, staggered or continuous staggered stitching Delivery belt with brake and thread cutting saw 2 x Stacker deliveries Including accessories, tools & manuals. Specification: Section sizes, Max: 510 x 320 mm Min: 140 x 100 mm Signature thickness, Max: 4 mm Dkeb Hotym Sfeaf Ehsl Sword opening lap, Min: 8 mm Stitch length : 16.5 mm Number of stitches – standard : 13 staggered : 7 staggered (combined): 13 Mechanical speed, Max: 4,500 cycles/hr.

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Dkob Hafsgqux Ne Ehsl Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print Dkjb Haf Ejhb Dtpohsl

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Dob Hafjft R Swe Ehekl Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Dkob Hou Ebt Usaf Ehol Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2009, Condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Dsb Hjd Sukxeaf Ehskl

Condition: excellent (used), Eos Metal Laser Sintering System Dkeb Haeqzgvaof Ehel Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Dob Heivpdwsaf Ehskl Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Dob Haeu Ebufjf Ehokl Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), DMG Mori Here we offer you a selective laser melting machine. Technical data: Construction volume: 300 x 300 x 300mm Layer thickness: 20-100 µm Materials: tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448x580x132 mm Dkebsu Ebv As Haf Ehol kg: 40 Cooling: water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power rotation: 10- 100% Beam parameters: 0.37 mm x mrad Type: LASERTEC 30 SLM Condition: used Scope of delivery: (See picture) (Technical data is subject to change and errors, information is subject to change!) We will be happy to answer any further questions you may have over the phone.