Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Fgjb Hll Nodkp D Hsdjb Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: used, - no description available - Fgob Hll Nev N Ntaedsb

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. Fgeb Hljrit H Rol Ndsb It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: new, Year of construction: 2024, machine/vehicle number: 05004100140, Drying and Burn-in Furnace TRO, Model III For drying racks with max. 50rods, useable size 100x140cm, outer dimensions: approx. 2520mm wide x 1870mm deep x 2300mm high, useable space: approx. 1700x 1350x 1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539 (max. permitted solvent quantity: 110g per charge). Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: 1,000kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Fob Hleh Tytbsl Ndsgb Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: refurbished (used), EOS P385 printer, fully inspected and refurbished! Supplied with 2 building frames and water cooler. Technology: SLS Materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, etc. Construction volume: 320x 320x 620mm Laser model: synrad 48-5, 50W CO2 laser Fsb Hlsn R Niksl Ndjgb All materials unlocked and parameter editor! We can take care of the transport and installation. Warranty and maintenance plans available. More information available on request.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, type of input current: AC, TAULER PRINTLAM 52 Digital, year 2007, single-sided thermal laminator Max. sheet size: 550 x 740mm, Fjb Hlsulgx Iel Ndogb Min “ “ 200 x 250mm Max speed 35m/min (4000sph) Paper stock 130 – 450 gr/sqm. Electrical specification – 380-415V, 3ph, 50Hz, 9.kW Dimensions 2.75mL x 1.25mW x 1.7mH Stream feeder Auto sheet feeder, Pneumatic pressure roller, Automatic sheet separator with drop tray delivery Touch screen controls

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 Fsb Hlsqzgvhol Ndsgb External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, We are looking to buy: SLS printers from EOS, among others, other brands are also welcome. Models like P100, P110, P385, P390, P395, P396, P700, P730, P760, P770, P800, P810 etc Fjb Hllekq H E To Ndsgb Any condition is welcome Do you have something? Then don't hesitate to contact us!

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Fsb Hor Ddu Isll Ndjgb Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! Fsb Houif Izell Ndegb License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: R6, working width: 420 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 500 kg, input current: 16 A, motor voltage: 400 V, compressed air connection: 5 bar, input frequency: 50 Hz, Spiral forming and binding machine for metal spiral binding of books. Forms and inserts wire coils into pre-punched notepads and diaries. Uses plain or coloured nylon-coated steel wire. Equipped with 16mm diameter forming mandrels. ( other sizes available on request) Range available: 6.- 22mm Ideal for notepads and student's diaries. Auto-eject with exit conveyor. Production speed up to 500 items per hour. Fgob Hll Notltr Sjdob Power requirements: 400 VAC 1 Kw Compressed air: 5 bar

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under Fgjb Hjnkalgell Ndjb standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Fjb Hoqy Edyell Ndjgb Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Formlabs Type: Form 3BL Technical specifications: 3D printing technology Low Force Stereolithography (LFS) Minimum dimensions for easy access (W × D × H) 90 × 96 × 104 cm Printer dimensions (W × D × H) 77 × 52 × 74 cm Printer weight 54.4 kg Build volume (W × D × H) 33.5 × 20 × 30 cm Layer thickness (vertical resolution) 25-300 microns XY resolution 25 microns Laser spot size (FWHM) 85 microns Resin cartridges 2 Resin dispensing system Automated Biocompatible materials: Yes Support structures Automatically generated Light touch removal Ambient temperature 18-28 °C Low Ambient humidity Operating temperature Automatically heats to 35°C Temperature control Air-heated pressure chamber Power requirement: 100-240 VAC Maximum 8.5 A 50/60 Hz 650 W Laser specifications IEC 60825-1:2014 | EN 60825-1:2014 Class 1 laser product 2 Light Processing Units (LPUs) Each Light Processing Unit (LPU) contains: Violet 405 nm laser Maximum 250 mW Emissions Information The Form 3BL is a Class 1 laser product. Accessible Emissions are within Class 1 limits. Connectivity Wi-Fi : 2.4 GHz, 5 GHz Ethernet : 1000 Mbit USB : 2.0 WLAN connectivity Protocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz, 5 GHz Supported security protocol: WPA/WPA2 Ethernet connectivity LAN port RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T). Connection via a shielded Ethernet cable (not included): at least Cat5 or Cat5e or Cat6 for 1000BASE-T USB connectivity USB-B port (Rev. 2.0) with a USB-A-B cable Noise emission Does not exceed 70 dB(A) Printer control Interactive touchscreen Notifications Touchscreen notifications, SMS/email via dashboard, Two LED status lights, speaker for notification sounds Print preparation Desktop software PreForm Fjb Hlst E Spljl Ndegb File format STL or OBJ Accessories: Building platform BP-F3l-01 Cleaning tool CT-F3L-01 Resin tank 2 available (one unused) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions for you over the phone. Written orders can be placed by email or fax

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Fgjb Hll Njubxkmjdob Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Fgeb Hll Njk Hz Nqedjb Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Fjbjgqux Ne Hll Ndogb Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Fsb Hll Noft R Swsdsgb Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Fgsb Hjhb Dtpell Ndjb Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Fgsb Hlou Ebt Uol Ndeb Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2009, Condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Fgjb Hlled Sukxs Ndeb

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Fobjivpdwe Hll Ndogb Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Feb Hll Nsqzgvajdogb Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Feb Hll Nju Ebufedsgb Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), DMG Mori Here we offer you a selective laser melting machine. Technical data: Construction volume: 300 x 300 x 300mm Layer thickness: 20-100 µm Materials: tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448x580x132 mm kg: 40 Cooling: water Central wavelength range: 1070 ±10 nm Fsb Hsu Ebv Aoll Ndegb Modulation frequency: 0-50 kHz Average power, max. 600 W Power rotation: 10- 100% Beam parameters: 0.37 mm x mrad Type: LASERTEC 30 SLM Condition: used Scope of delivery: (See picture) (Technical data is subject to change and errors, information is subject to change!) We will be happy to answer any further questions you may have over the phone.