Year of construction: 2022, operating hours: 7,200 h, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, Component A and Component B Chedpfxs Ahp A Rj Abrod The dispensing head has been expanded with a Y-shaped slider. - Manual adjustment mechanism for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for Comp. A + B - Material pressure tank 50 l for Comp. A - Level monitoring for Component A + B - Material recirculation to the dispensing pump for Comp. A and B - Material evacuation for Comp. A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Workbench approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, Component A - Transfer station for bung drum, Component B - Dispensing control system (Siemens PLC control based on S7-300) - Precision piston dispensing pump for Comp. A and B - EKDP A, Component, 257 ccm - EKDP B, Component, 64 ccm --> 1 x spare EKDP A and EKDP B are included. These have been reconditioned by Rampf as an exchange part. (see image)

Year of construction: 2011, condition: used, functionality: fully functional, We are offering a used Niemann V KDV 93-15 FU vacuum dissolver, manufactured in 2011. Manufacturer: Wilhelm Niemann GmbH & Co. Type: V KDV 93-15 FU Serial number: 114015 Year of manufacture: 2011 Motor power: 11 kW Voltage: 400 V Current: 22 A Speed: 200–3000 rpm Frequency: 50 Hz Ambient temperature: 0 to +40 °C Protection rating: IP54 Codpo Ahxxkefx Abrohd If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Grundfos CRIE20-3 Multistage centrifugal pump Unused, Vertical Multistage centrifugal pump, with built in frequency converter enabling continuously variable control of the motor speed, 65mm inlet and outlet, 5.5Kw motor, 3Ph Cedps Ad Rf Hsfx Abrohd

Condition: excellent (used), Hilge MAXA 200-400-CN Centrifugal pump Single stage end suction centrifugal pump, mounted on skid with Siemens 18.5Kw motor, flow rate 400M3/h Csdpfxe Ad Rife Abrshd

Condition: excellent (used), Seepex BN176L Screw pump Cedpfx Abe Ad Rdcershd Compact standard eccentric screw pump, designed for efficient pumping of low to high viscosity media, with or without solid particles, with Nidec variable speed inverter and Nidec 4Kw motor, 3Ph

Condition: excellent (used), Lowara FHE50-160/55P Centrifugal pump Chsdpfx Abj Ad Rfyorod Unused, end suction centrifugal pump, 316 stainless impellers, suitable for pumping hot or cold mildly aggressive liquids, with 5.5Kw motor, 3Ph

Condition: good (used), Hilge MAXANA-AD-65-200 Centrifugal pump Single stage, heavy duty sanitary centrifugal pump, 2900 RPM, 15.0 KW, Flow 100 m3/h, 3Ph Codpj Ad Rkvefx Abrjhd

Condition: good (used), Grundfos NB65-125/137 Centrifugal volute pump Single stage centrifugal volute pump, 7.5Kw, 2910 RMP, 1916 Ltr/min, 3Ph Csdpfo Ad Rbzox Abrjhd

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: V37Y05S99403513, clamping force: 100 kN, screw diameter: 30 mm, clearance between the columns: 400 mm, column diameter: 60 mm, injection pressure: 250 bar, injection weight: 400 g, plate height: 800 mm, total length: 2,000 mm, total width: 800 mm, total height: 3,400 mm, overall weight: 2,600 kg, input voltage: 380 V, The machine was refurbished in 2024 and features a new pump, a new complete control system, and light barriers. The pump has 900 operating hours. The machine is in good working order and is available immediately. Chodpe Agvzpjfx Abred

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Cjdpfx Asyr H Anebrohd Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Chsdpfx Abezvybwjrsd

Condition: used, functionality: fully functional, machine/vehicle number: 4937, Josef Emmerich ER511VGL Pump Set – Complete Unit on Frame – Industrial Design For sale: a robust industrial pump set from Josef Emmerich Pumpenfabrik GmbH, mounted on a steel frame with an electric motor, buffer tank, control cabinet, and piping. Suitable for various applications in water treatment, the process industry, wastewater technology, and industrial installations. The unit is designed as a complete system and can be used for pumping water, sludge-containing liquids, and other process media, depending on the application. The pump is equipped with an electric motor and pressure tank, enabling reliable and stable operation. Technical specifications: Manufacturer: Josef Emmerich Pumpenfabrik GmbH Type: ER511VGL Pump number: 4937 CE-marked Drive: Electric motor Design: Complete pump set on frame Includes: Electric motor Pump Pressure/buffer tank Control cabinet Piping and connections Applications: Chjdpfx As Ah Dynjbrod Water treatment Wastewater treatment plants Process water transport Industrial pump installations Recycling and environmental technology Production processes Special features: Durable industrial design Compact setup on frame Suitable for continuous operation Supplied complete, as shown Easy to integrate into existing installations

Condition: used, Year of construction: 2014, Lamella clarifier Chamber filter press Dirty water pump Codpfo Ah Hkdox Abrjhd Mixing tank Control system

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Cjdpfx Aezvgl Aebrshd Please check out our other listings and subscribe to our stock list.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Chjdsxg Nxajpfx Abrsd

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Chsdsyz R Unepfx Abrod Dimensions: 700mm X 1450mm

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen. Chsdpfx Aboygvncjrod

Condition: used, 1 x DCE Dust Extractor Unit Cjdpfjz Ap Srsx Abrohd

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area Csdpfxe Ahpltj Abrohd - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Cjdpfx Abjz Iqrnorohd The machine is being sold as is.

Year of construction: 2020, condition: new, ARTES DN150 PN100 Pneumatic Control Ball Valve – ProTACT – SAMSON 3730-3 For sale: Industrial control ball valve manufactured by ARTES Valve & Service, equipped with a ProTACT pneumatic actuator and SAMSON 3730-3 HART positioner. Complete assembly, supplied in a wooden transport crate. Valve specifications: * Manufacturer: ARTES Valve & Service * Type: Control Ball Valve 150 W * Nominal diameter: DN150 * Pressure rating: PN100 * Operating pressure: 47 bar(g) * Operating temperature: 385°C * Body material: 1.0460 * Kvs value: 230 m³/h * Opening angle: 90° * Year of manufacture: 2020 * Serial number: 3162026.1 * Tag number: 83-PCV-800 * Flanged connections Pneumatic actuator: * Manufacturer: ProTACT GmbH * Type: PRY.B2.401S.04.2530KΦ100/ * Reference: HPY-B2-401-SRC4+HT * Supply pressure: 4–6 bar * Temperature range: −15°C to +150°C * Spring action: Clockwise (CW) * Serial number: IS-200162-1-1 Positioner: * Manufacturer: SAMSON * Model: 3730-3 * Type: HART-compatible pneumatic positioner * Input signal: 4–20 mA DC * Maximum supply pressure: 7 bar Chsdo Ahic Hopfx Abred * ATEX marking * Integrated position indication and diagnostics Condition: Excellent visual condition, stored in protective packaging inside a wooden crate. Operating condition has not been independently verified. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: used, Vertical multistage high-pressure centrifugal pump GRUNDFOS Type CR8-80 A-A-A-BUBE Model B4250008 P1 9535 Year of manufacture 1995 Nominal flow rate 9.5 m³/h Ceds Ahzl Sspfx Abrjhd Nominal head 67 meters = 6.7 bar Pump pressure max. 16 bar Operating temperature max. 120 °C Nominal speed 2900 rpm Motor power 3 kW Mains connection 400 volts, 50 Hz - Pump design with 8 stages - Pump components made of stainless steel 1.4301, pump base made of cast iron - Connection flanges DN 40 - Suitable for potable water supply, irrigation and drainage Space requirement pump L x W x H 250 x 200 x 870 mm Weight 50 kg Very good condition, overhauled from stock, not used after overhaul Not a submersible pump or a deep well pump.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. Cedpfxjz Dgbwj Abrshd With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. With technical documentation.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Codpfsz I Throx Abrjhd Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Chsdpfxez Rv Tdj Abrod Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.