Year of construction: 2016, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Dodjz Imr Repfx Aizekw No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2021, Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible. Dsdps Aba R Tefx Aizekw

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day Dodpfx Aij Ahpltjzjkw - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. Dkedpfxjz I S R Se Aizsw The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), For sale: water pump, - BBA B156 TW GMC. - Year of manufacture: 1998. - Engine: 11 kW / 1460 rpm. - Operating hours: 88. - Capacity: 180 m3/h. Dkodpfx Aez Skxljizow - Condition: excellent/like new.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections Dsdpfx Ajz Di Nwjizjkw ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Filter cleaned pneumatically with compressed air (manually). Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Dodez R Shlopfx Aizskw Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Dkodpfx Aioz Hxfyjzjw Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Year of construction: 2018, condition: like new (used), For sale: a gas-powered blower with an explosion-proof EX motor, Aerzen GM 25S, adapted for operation with gas and in potentially explosive environments. Dkedpfx Ae Afuryoizsw Unused.

Condition: used, Year of construction: 2017, Airflow: 27,000m³/h, filter area: 215m², filter load: 126m³/m²/h, number of filter bags: 204, number of filter sections with 36 bags: 5, number of filter sections with 24 bags: 1, number of air injection sections: 1, chain speed: 3.9m/min, drive shaft speed: 5rpm, max. material throughput: 20m³/h, regeneration carriage travel speed: 6m/min, chain conveyor motor power: 0.55kW, chain speed: 3.9m/min, max. material throughput: 20m³/h, regeneration fan motor power: 4kW, regeneration carriage motor power: 0.37kW, regeneration carriage travel speed: 6m/min, length: 4500mm, width: 2700mm, height: 6615mm, weight: 4.4t, including documentation. An on-site inspection is possible. Dkjdpfxo Adt H Ho Aizsw

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Dsdpfxeyhc T Is Aizokw Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, Vertical multistage high-pressure centrifugal pump GRUNDFOS Type CR8-80 A-A-A-BUBE Model B4250008 P1 9535 Year of manufacture 1995 Nominal flow rate 9.5 m³/h Nominal head 67 meters = 6.7 bar Pump pressure max. 16 bar Operating temperature max. 120 °C Nominal speed 2900 rpm Motor power 3 kW Mains connection 400 volts, 50 Hz Dsdpfxo Ahzl So Aizekw - Pump design with 8 stages - Pump components made of stainless steel 1.4301, pump base made of cast iron - Connection flanges DN 40 - Suitable for potable water supply, irrigation and drainage Space requirement pump L x W x H 250 x 200 x 870 mm Weight 50 kg Very good condition, overhauled from stock, not used after overhaul Not a submersible pump or a deep well pump.

Condition: used, Year of construction: 2024, 3 horizontal, fully insulated stainless steel storage tanks are offered for sale. Nominal volume: 30000liters per tank. Gross volume: 31190liters per tank. Permissible operating pressure: -0.1 to +0.6bar. Permissible operating temperature: -10 to +100°C. Material: stainless steel 1.4571. Outside diameter: 2900mm. Length over heads: 5170mm. Equipped with complete insulation, walkable steel structure providing access to the connections and nozzles, and a support frame. Total weight: approx. 5100kg per tank. Handed over fully flushed and cleaned. Inspection possible by arrangement. Dkjdo Aga Ifepfx Aizjw

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS Djdpfx Aio Ahqpgezokw - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Djdpfx Aioz Hxc Sezokw Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Year of construction: 2002, Two identical storage tanks are available, capacity: 5000l each, max. operating pressure: 3bar, length: 2330mm, width: 2200mm, height: 2400mm, insulated with mineral wool, last inspection by DEKRA (internal inspection + pressure test) in 2024 with no defects found. An on-site inspection is possible. Dsds Ah Txzspfx Aizskw

Condition: used, For sale: API Heat Transfer SIGMA industrial plate heat exchanger, manufactured by API Schmidt-Bretten GmbH & Co. KG, Germany. Dedo Agxgaopfx Aizokw The unit was manufactured in 2019 and comes from an industrial installation. Technical specifications: * Manufacturer: API Heat Transfer / Schmidt-Bretten * Model: SIGMA M 13 NBN * Equipment type: Gasketed plate heat exchanger * Year of manufacture: 2019 * Serial number: PA-118673 * Maximum allowable pressure: 10 bar * Maximum allowable temperature: 150°C * Dry weight: 155 kg * Connections: Flanged * Construction: Bolted plate pack with removable plates Condition: Used industrial equipment, dismantled from an industrial installation. The heat exchanger shows normal signs of previous use, including some surface oxidation and wear. The unit has not been pressure-tested or functionally tested by us. Original operating instructions are included. Suitable for industrial heating, cooling, and heat recovery applications, subject to verification of process compatibility and technical specifications. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty, claims, or returns. Please contact us for further information or a quotation.

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar Product pump- Fristam FDS 2-5: twin-screw- Flow rate: 3,650 – 35,000 L/h- Viscosity: 7,500 – 16,500 mPas Dedpfs Ahkz Usx Aizokw High-shear mixer - Rotor / stator - Power: 90 kW Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation.

Condition: good (used), functionality: fully functional, Manufacturer: NETZSCH Type: 2NL-40A Design: NEMO® eccentric screw pump (progressive cavity pump) Machine number: 212311 Flow rate: approx. 6,000 l/h Motor power: 2.2 kW Motor speed: 1,410 rpm Dedpfj Agpblox Aizskw Pump speed: 66–122 rpm Speed control: mechanically adjustable Spare part: includes spare stator Condition: good, fully functional

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Dodpfez Smqdjx Aizjkw Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Dodez Dgbwspfx Aizekw Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. With technical documentation.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², input voltage: 380 V, volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,500 mm, compressed air connection: 6 bar, sheet thickness steel (max.): 40 mm, warranty duration: 12 months, empty load weight: 5,500 kg, input frequency: 50 Hz, noise level: 78 dB, Equipment: documentation/manual, Baghouse dust collector with fabric filter sleeves Galvanized steel structure, rigidly bolted with sealing gasket Airflow rate: 50,000 m³/h Total fabric area: 510 m² 1 dust settling zone 4 explosion-proof ventilation panels Motorized screw conveyor Rotary valve for continuous discharge of filtered dust 1 control panel for machine operation 1 suction fan Ladder with safety cage to prevent falls Upper guardrail Djds Ah Smuepfx Aizokw

Condition: used, Used industrial dust extraction system, complete with a Dynair 7.5 kW fan, electrical control panel, and filtration unit. Dedpjz Rpltsfx Aizokw No disassembly required. Available immediately. Complete system as shown in the picture. Located in Rotterdam, the Netherlands. Delivery: EXW Rotterdam. Worldwide inquiries are welcome. Additional information and photographs are available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 200 m², input voltage: 380 V, volume flow: 25 m³/h, total width: 2,450 mm, total length: 3,800 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 78 dB, Equipment: documentation/manual, Fabric filter dust collector Capacity: 25,000 m³/h Dimensions: approximately 3800 x 2450 H 8500 mm No. 01 dust settling chamber Total filter fabric area: 200 m² Filter fabric cleaning: air jet system, complete with control unit No. 02 explosion-proof ventilation panels Motorized screw conveyor Motorized rotary valve Ladder with safety cage Dodpe Ah S A Ujfx Aizekw Upper guardrail Electrical control panel for the machinery Suction fan Optional: Inverter in the electrical control panel Discharge system into a container

Condition: excellent (used), Year of construction: 2009, Filter with under-filter hopper, ERMONT model, for asphalt mixing plant. Year: 2009 Dodpezf Nbfjfx Aizskw