Year of construction: 2001, condition: excellent (used), functionality: limited functionality, Used Paragon Cox H55 hydraulic lifting and driving vacuum double shaft mixer, disperser for sale The contact parts of the mixer are made of stainless steel With complete hydraulic system Without control cabinet. Manufacturer Cox Paragon Year of manufacture 2001. The contact parts of the mixer are made of stainless steel 1 pc 800mm dia 3 blade adjustable butterfly mixer max 400rpm SAI GM4-1000 D40J 100kw hydraulic piston motor Gbedpfezzknlox Aansw 1 pc high speed dispersing mixing head ca: 1000rpm Sauer-Danfoss MMF046C 45kw axial piston hydraulic motor Hydraulic power unit main motor 55 kw 1440rpm 400/660volt 2 pcs 480 liter mixing vessel + 4 pcs stainless dosing rings + hydraulic press head. The mixer can be raised hydraulically by approx. 120 cm

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Gjdpfxeppucaj Aanjbw Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Gbjdpfx Aoppyhteanjw Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Gbedpfx Asqakbreanew Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Gbsdpfx Aajqakhusnsw Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Year of construction: 2010, condition: ready for operation (used), machine: used piston hydraulic membrane pump Gbedpfxjd Exqle Aanjw type: Abel HMD-G-50-500 Flow rate: max. 30 m³/h Discharge pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower The pump is controlled via frequencly converter.

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Width 125 mm Gbsdjd Eygpspfx Aanjw

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Godpfxed Eyl Nj Aanobw Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed fitting: on the suction and pressure sides, incl. pressure reducer, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar in design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-running safe. The pump's flow rate is energy-efficiently controlled by a speed-controlled drive, depending on the delivery pressure, using a frequency converter. We also offer our piston diaphragm high-pressure pumps in a special design for tunnel construction. Do you have specific requirements? Please ask us.

Condition: new, machine/vehicle number: 85163, machine: new piston hydraulic membrane pump type: Abel HMD-G-50-500 Flow rate: max. 50 m³/h Discharge pressure: 15 bar Gsdpfx Asd Ey I Aeanjbw Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower : The pump is controlled via frequencly converter.:

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Gbjdpfx Aed Ey I Isanew Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feeding valve: on the suction and pressure sides, including pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-running safe. The pump's flow rate is energy-efficiently controlled by a variable speed drive, depending on the delivery pressure, using a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special version for tunnel construction. Do you have special requirements? Please contact us.

Condition: new, machine/vehicle number: 85163a, machine: new piston hydraulic membrane pump Gbjdpfxed Ey I Ne Aanjw type: Abel HMD-G-50-500 Flow rate: max. 50 m³/h Discharge pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower : The pump is controlled via frequencly converter.:

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 5100443-2 , Product: Piston membrane pump, feed pump, used Type: Abel HMD-G-32-0250 Construction year: 2009 Power: max. 25 m³/h Pressure: 15 bar Machine number: 5100443-2 Length: 3300 mm Version: Acid resistant, FU controlled Gbedpfx Aajd Ey Saenjw

Condition: new, machine/vehicle number: 85162, machine: new piston hydraulic membrane pump type: Abel HMD-G-50-500 Flow rate: max. 10 m³/h Discharge pressure: 15 bar Godjd E S Sfjpfx Aanobw Motor: 5,5 KW, 400 V, 50 Hz, 1500 rpm, - with blower : The pump is controlled via frequencly converter.:

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Gedpfjd Hb Acox Aanobw Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: new, Hydraulic cylinder exchange cylinder Chamber filter press Gbedsd Hf Uwjpfx Aanow As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Article no.: RE-HU-2019-0602-B38-e Gbjdped Hgc Uofx Aanow Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Dimensions: diameter 2.40 x height 2.80m Volume: 12 m3 Year of construction: 1989 Fabr. No .: 55163

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 40 m³/h, centrifugal vertical cantilever pump chemical pump FIP ALPHA 65-40 V2CM year of construction: 2008 DN: 50 Nominal flow rate 40 m³/h Nominal head: 45 m p [track]: 16 T [°C]: -25 ÷ + 140 Gbsdpfeufhzpex Aansw Turn number: 1470 electrical power 16.5KW 400V 50Hz 34.7A engine speed: 1470 Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries length: 1700mm width: 700mm weight: 450 kg

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Gbedpfxjwqydkj Aanew Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Gedpfxewqyfho Aansbw Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Chamber filter press Type: Chamber filter press 1500/90 Design: side bar guided Filter plate size: 1500x1500 mm Number of plates: 90 Filter plates: PP Cake thickness: 25 mm Gbedpfx Aaowqzhwonjw Filter cloths: optionally available according to the medium Discharge: closed Filter area: approx. 350 m² Press volume: approx. 5049 dm³ Plate pack length: approx. 7000 mm Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: automatic Hydraulics: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Dimensions: LxWxH 10100x2300x2050 mm Weight: approx. 31000 kg Control cabinet: yes Operating side: right or left Hydraulic unit: yes Purchase or rental: Inspections of the systems can be arranged at our plant.

Condition: used, Plant: Chamber filter press used Application: Sludge dewatering Design: Bridge beam Gsdsvbbb Topfx Aanjbw Filter plate format: 2000x2000 Number of plates: approx. 100 pieces Filter plates: cast iron Filter cloths: optionally available to suit the medium Filter area: approx. 1225 m2 Press capacity: approx. 8500 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: used, System: Used decanter / centrifuge Manufacturer: KHD Model: Solid bowl screw centrifuge Type: CP 3054 Machine number: 5574 Year of manufacture: 1995 Maximum speed: 3200 l/min Gjdovz H N Ajpfx Aanebw Drum inner diameter: approx. 552 mm Drum wall thickness: 12.0 mm Drum material: ST46.0 Weight: approx. 4660 kg Documentation: yes Purchase and rental possible

Condition: used, System: Used decanter / centrifuge Manufacturer: KHD Gbedpfx Ajvz Icksanow Type: Solid bowl screw centrifuge Machine number: 4973 Machine type: CP3-2 Year of manufacture: 1991 Max. drum speed: 2600 rpm Drum inner diameter: 614 mm Drum wall thickness: 17 mm Drum material: 1.7218 Max. operating temperature: 50° C Total machine weight: approx. 7030 kg Purchase and rental: possible

Condition: used, System: Used decanter / centrifuge Manufacturer: KHD Type: Solid bowl screw centrifuge Machine number: 5445 // 9-8535-0-2672 Machine type: CP3-1.1 Year of manufacture: 1994 Max. drum speed: 2500 rpm Drum inner diameter: 450 mm Drum wall thickness: 11 mm Gbodjvz Icwepfx Aanew Drum material: H 2 Max. operating temperature: 50° C Total machine weight: approx. 2400 kg Purchase and rental: possible

Condition: used, System: Decanter Type: CP 4-1.1 Year of manufacture: 1991 Machine number: 5045 Speed: 2200 1/min Drum wall thickness: 16 mm Gjdpevz Rw Rsfx Aanjbw Drum material: 1.7382 Total weight: 9500 kg Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.