Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Iedpfx Ahjvgnvbj Usik

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph Iijdstwdq Tepfx Ah Uok

Condition: used, Aerzen Blower GMA 11.4 Power: 10kw RPM: 2300 Capacity: 420m3/h Pressure: 1 bar Iodpfjwq Sx Hjx Ah Ueik Diameter inlet: 100mm Diameter outlet: 100mm Approx Dimensions: 1300mm X 800mm X 1100mm

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW Iisdpjul Eawefx Ah Uek weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 2,400 m³/h, overall weight: 30 kg, power: 0.37 kW (0.50 HP), noise level: 67 dB, MAKRA oil mist collector system Technical characteristics: Supply voltage: 400 [V] Weight: 30 [Kg] Air volume: 2400 [m³/h] Cycle: 50 [Hz] Installed power: 0.37 [kW] Iijdpfx Ahjxxihlo Usk Noise level: 67 [dB] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 1989, Diameter max. 75 mm Dimensions (L/W/H) 800x600x1200 mm weight ca. 150 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Isdpfxjxrg D Rs Ah Uoik Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, AUMA 07.1-F10 Multi-turn actuator New -Auftragsnr: 23078028 -NR: 2218NS66675 Iedpfx Ahjv Uaico Usik -PTB 01 ATEX 1119 -SKE0 56-2/80 -Art nr: Z048.703 - AZ F-3-S-ISO-STD

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Venting Construction type: Container Remarks: Weld seams not ground Internal diameter: 1,080 mm Overall width: 1,120 mm Total height: 1,600 mm Overall length: 1,120 mm Base type: Frame Location: Bremen Technical documentation: Drawing Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Factory new Cylindrical height: 1,000 mm EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: DN50 DIN 11851 Iodpfxsxqc N Ts Ah Uoik MATERIAL SPECIFICATION Exterior surface: Mill finish IIIc Feet material: Galvanized steel

Condition: used, Aerzen Blower GMA 11.4 Complete with ancillary equipment Iedpfxjwq Sydj Ah Ueik

Condition: used, Year of construction: 1988, Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press Iedpohvfznefx Ah Usik -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 panels -Hydraulic Cylinder: Stroke: 115mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, filter area: 20.4 m², input voltage: 400 V, volume flow: 3,200 m³/h, overall weight: 336 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, DONALDSON DMC-D1 Torit Dryflo oil mist extraction and filtration system Isdpfsxxid Hex Ah Usik Technical characteristics : Serial N°: 261-4508 Supply voltage: 400 [V] Weight:336 [Kg] Air volume: 3200 [m³/h] Filter area: 20.4 [m²] Cycle: 50 [Hz] Installed power: 3 [kW] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identical pieces available. Specifications: Motor Power: 73.8 hp Airflow Capacity: 10,594.4 ft³/min. Total Pressure: 1 PSI Iiodpfx Aexyxm Hjh Uek

Condition: new, I sell Lowara 15SV17P150T 8-24m3/h 15Kw pump, New. I have different power of Lowara pumps. We can help arrange a cost-effective shipping company or courier for you. Iedpfx Aovccyyoh Usik

Condition: used, tank capacity: 500 l, GENERAL INFORMATION Iodpfoxqc Hrjx Ah Uoik Construction type: upright Remarks: Slight variations in the design of the containers, e.g., 2 containers are mobile on castors, the rest are on fixed V2A frames; maximum pressure in some cases up to 3 bar; variations in the connections on the manhole cover; overall height is in part slightly lower (depending on the connections on the manhole cover) Inner diameter: 800 mm Total height: 1,780 mm Max. overpressure: 2.5 bar Support type: Frame Location: Bremen Nameplate: Volume: 500 liters Product-contact material: V4A 1.4435 (AISI316) Condition: Used Previous application: Pharmaceutical EQUIPMENT Manhole / Dome: on the top head (DN 400) Outlet: present MATERIAL SPECIFICATION External surface: ground Internal surface: ground

Condition: new, New - Lowara DOC Pump Suitable for clean and dirty water applications such as Cellar or Basement drainage or small sumps. With channel impeller and can be supplied with or without float switch. These pumps have thermal overload protection in case of dry-running and overheating. The DOC7 range has a 1 1/4" BSP Female discharge. General Specification of DOC Range: Delivery - 14m3/h flow rate 11m maximum head 3 Phase or 1 Phase 50/60 Hz Power 0.25 kW to 0.55kW 5m maximum immersion depth Temperature of pumped liquid - 0°C to 40°C DOC3 DOC7 up to 10 mm max suspended solids DOC7VX up to 20mm suspended solids Insulation class B IP68 rated 10m cable length supplied with Pump Iisdpsrupn Dsfx Ah Uek

Year of construction: 2025, condition: new, New Aerzen gm 35s stage Iiodex Hhzcopfx Ah Uok

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 540 mm, total height: 590 mm, overall weight: 100 kg, inner radius: 210 mm, power: 5.5 kW (7.48 HP), type of input current: three-phase, motor manufacturer: Euronorm, Finisher type 400. "Finisher 400" available from stock for all types of processes. Iijdpfx Aextvnueh Ujk Product feed dimensions: 400x300mm Product discharge dimensions: 400x400mm The "Finisher 400" has been processed by "ViwateQ". The machine is fully welded both inside and outside. Price includes 2 screens of your choice. For further questions or photos, please contact us! A.J. van Velthuizen Metaalbewerking

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Iijdpfxjxyxmte Ah Uek

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Iisdpexgq I Njfx Ah Ujk

Condition: used, tank capacity: 490 l, GENERAL Equipment: lifting lugs Design: vertical Remarks: Fill pipe inside the vessel (see pictures); GEMÜ diaphragm valve at the outlet Internal diameter: 790 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Support type: mobile on castors Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 490 litres Ijdjxqc Ehspfx Ah Ujik Double jacket volume: 90.0 litres Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 745 mm Last application: pharmaceutical industry VESSEL Max. operating temperature vessel / °C: 130 °C Ends: dished ends HEATING/COOLING JACKET Max. permissible negative pressure double jacket / pipe space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top end (DN 400) Outlet: DN25 DIN 11851

Condition: used, Used stainless steel round vibrating screen by Allgaier Process Technology GmbH (Germany) model D1200. Screen has working diameter 1200 mm. Single deck and cleaning deck with rubber balls. Central feeding inlet has diameter 200 mm. Side wall outlet has connection 145 mm. Central discharge of final product has diameter 200 mm. Screen is driven by two vibrating motors, each: 0,75 kW, 1000 rpm, 220-240/380-415 V, 50 Hz, kN 11,1 Ex design. Machine is mounted on stainless supporting frame. Additional equipment: Iiedpfx Asx Db Rpsh Ujk - gravity feed metal detector by Cassel (D) model Shark 2, on stainless steel supporting frame - carbon steel construction frame with discharge stainless steel pipe and butterfly valve.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Iedpfxexgrdfs Ah Ueik

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Iijdpfxoxgrnqs Ah Uok Drive power: 90–200 kW

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Rotor diameter: 500 mm Iodoxgrd Eepfx Ah Uoik Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW Iedpoxgrn Rsfx Ah Usik With equipment