Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, Cgjdpfx Aaehuffceaor large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Cgsdeymx N Aepfx Aaaer Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Cgodpfepl Tqtox Aaaor Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, System: hydraulic piston membrane pump, used Type: REWA/Abel HMD-G-50-0500 Cedpfx Asib A Eqeaasgr Article no.: A51-288 Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, Version: with control cabinet and frequency converter

Year of construction: 2013, condition: good (used), Used progressing cavity pump Manufacturer Netzsch Type: NM063BY04S18B Machine number: 459933 Year of construction: 2013 Output: 3.50 // 18 m3/h Speed: 91/288 min1/rpm Pressure: 16 // 0.10 bar Cgjdpfsillx Djx Aaaer Are you looking for a specific pump? We have other used pumps in stock - please ask us.

Condition: used, Mixed lot Extenterschneckenpumpen , different manufacturers ( Netzsch, Bornemann, Seepex etc ) for the most part functional - but some not) dismantled from the running screaming. Only to be sold as a lot Cedpeilu Uqofx Aaasgr

Condition: new, ABEL contact pressure gauge for ABEL piston diaphragm high-pressure pumps. pump monitor, NEW ! We are your service and spare parts partner for ABEL pumps. Almost all spare parts are available from stock or at short notice. Csdpsiyp S Isfx Aaajgr

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. Csdpfx Asiyqiljaaogr NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, ABEL valve seats for ABEL piston diaphragm high-pressure pumps. NEW ! Codpfoiyqipex Aaaogr We are your supplier for ABEL piston diaphragm high-pressure pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL ball with steel core for ABEL piston diaphragm high pressure pumps. NEW ! Cgjdpfxsiyqiwe Aaajr We are your supplier for ABEL pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL valve ball on valve seat for ABEL piston diaphragm high pressure pumps. Csdpfxoiyqize Aaasgr NEW ! We are your supplier for ABEL piston diaphragm high-pressure pumps, filling pumps, chamber filter presses, service and spare parts partners for ABEL pumps. Spare parts available from stock or at short notice.

Condition: good (used), filter area: 21 m², pressure: 15 bar, cake thickness: 25 mm, System: Chamber filter press Rittershaus & Blecher Type: 0-22-080-2230-00 Design: Chamber filter press Filter plate format: 800x800/59 Cake thickness: 30 mm Year of construction: 1989 Number of plates: 24 pieces Filter cloths: optionally available in coordination with the medium Press capacity: approx. 310 dm3 / final capacity approx. 430 dm3 Filter area: approx. 21 m2 / 29 m2 Filter pressure: approx. 15 bar Dimensions LxWxH 5480x2000x2660 mm Cgodpfx Aasqakdbsaer Safety device: e.g. light barrier etc. optional by arrangement Purchase or rental: Inspections of the systems by arrangement at our factory. Miscellaneous: We can supply the system used and ready for operation or refurbished according to your wishes and requirements; would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Cgjdeqakhuspfx Aaasr Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) Cedpfx Aaet Ay Scsasgr - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Condition: used, System: Sangerhausen Maschinenfabrik, Hortz screw centrifuge, used Manufacturer: Maschinenfabrik Sangerhausen Type: SKZSNh-S450L4 Manufacturer no.: 6952 Year of manufacture: 1992 Speed: 3000 min1 Engine power: 22 kW Cgjdpfx Aasvz Ic Djasr Drum inner diameter: 450 mm Empty weight: 3000 kg

Condition: used, System: Chamber filter press, used Type: Passavant Application area: sludge dewatering, gravel washing, tunnel construction Design: bridge rail Year of construction: 1995 Filter plate size: 1200x1200 Cedpfewqyfnex Aaasgr Number of plates: approx. 94 plus head and end plate, final expansion +13 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 270 m2 Press volume: approx. 2480 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: used Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Used chamber filter press Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Cgedpfswqyf Iex Aaasr Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: like new (used), Year of construction: 2020, System: 2-phase centrifuge, dewatering system in a double-deck container Manufacturer: Hiller Type: DP45N.422 VA HY Mach. No.: H6138 Year of manufacture: 2020 Cgedpfsv D Rlysx Aaaer System: in a double-deck container, conveyor technology with side swivel conveyor, separate pump technology. System: demonstration system - as good as NEW! Maximum permissible speed: 3500 l/min Permissible Density: 1.3 kg/m3 Inner diameter of drum: approx. 450 mm Material: All parts in contact with the media made of duplex steel Drum material: 1.4470 Drum wall thickness: 11 mm Max. operating pressure: 100 mbar Drum drive: size 200L Power: 30 kW Speed: 3000 rpm V/Hz: 400V, 50 Hz Hydraulic unit: PVRK07521L Power: 7.5 kW Control: FU Seepex pump: concentrate pump MD 006-12, see photos Macerator: Vogelsang, type RotaCut, RCQ-26G inline cyclone, BioCut and RCQ-33G inline cyclone see photos Spiral conveyor: Hiller see photos Polymer plant: GVU Technik Polymer Mix Station - technical data see photos Documentation: complete

Condition: used, System Chamber filter press mobile, used Type Netzsch Application area sludge dewatering Codpfxowqyd De Aaaegr Commission No. 040.087 Filter plate size 1200x1200 Number of plates approx. 95 Filter plates PP Filter cloths optionally available in accordance with the medium Filter area approx. 230 m2 Press volume approx. 3400 dm3 Filter pressure approx. 15 bar Year of construction 1993 Length approx. 16 m Width approx. 3.25 m Height approx. 2.97 m Application sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Cgjdpfovz Dddex Aaasr Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: excellent (used), Plant: Chamber filter press used type of construction: head guided filter plate format: 1500x1500 mm filter plates: 70 pieces / final extension 100 pieces Filter plates: PP Filter cloths: optionally available in accordance with the medium Throughput: 20-25 m3 per batch Filter area: 242 m² Press capacity: approx. 50 dm³ Filter pressure: 15 bar Closing pressure: 400 bar Plate transport: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Cgsdpfx Aeg S I Smsaaer Filling pump: optional available

Year of construction: 1989, condition: used, Used shredder Manufacturer: Seybert & Rahier Type: RST 413 Serial no.: 158283 Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3 Csdjil Aqqspfx Aaaegr

Condition: used, System: Mobile chamber filter press, used Type: Netzsch Area of application: Sludge dewatering Commission No.: 040.087 Filter plate format: 1200x1200 Number of plates: approx. 95 Filter plates: PP Filter cloths: optionally available depending on the medium Filter area: approx. 230 m2 Press capacity: approx. 3400 dm3 Filter pressure: approx. 15 bar Cgodpswf Uuasfx Aaaor Year of construction: 1993 Length: approx. 16 m Width: approx. 3.25 m Height: approx. 2.97 m Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspections of the systems are available by appointment at our factory.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Cgedpfx Aajwqydwsaor Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works. Cjdpfx Aowqyfheaaegr