Used industrial robots for sale (1,199)

Condition: ready for operation (used), Year of construction: 2017, overall weight: 19 kg, This Rethink Sawyer was manufactured in 2017. A collaborative robot with a 7 degrees of freedom and a payload capacity of 4 kg. It features a maximum reach of 1260 mm and operates with a typical tool speed of ~1.5 m/s. Equipped with a head camera and a wrist-mounted Cognex camera, it meets the ISO 10218-1:2011 collaborative safety standard. Contact us for more information about this machine. Hsdpfx Abeyaqvhs Rjff 3 pieces available • Degrees of freedom: 7 • Payload: 4 kg (8.8 lbs) • Maximum reach: 1260 mm • Task repeatability: ±0.1 mm • Typical tool speed: ~1.5 m/s • Joint ranges: J0–J3: 350°; J4–J5: 340°; J6: 540° • Electrical: 100–240 VAC, 47–63 Hz, ≤4 A; power consumption ~700 W • I/O (controller): 8 digital IN / 8 digital OUT • I/O (end of arm via ClickSmart plate): 4 digital IN / 2 digital OUT / 2 analog IN • Communication protocols: Modbus TCP, TCP/IP • Vision: Head camera (wide view) • Force sensing: High-resolution force sensors embedded in each joint • Protection class: IP54 • Collaborative safety standard: ISO 10218-1:2011 • Environmental: operating temperature ~5 °C to 40 °C; relative humidity ≤80% • Control cabinet: included Additional equipment • Wrist-mounted Cognex camera

Condition: ready for operation (used), Year of construction: 2016, This KUKA KR 16 L8 arc HW was manufactured in 2016. It features a robot range of 2015 mm and a maximum load capacity of 8 kg. Equipped with a KR C4 control unit and a FRONIUS TPS 400I welding unit from 2017. Contact us for more information. • Robot range: 2015 mm • Robot max. load (payload): 8 kg Hsdpfx Absybcfqj Reff • Control unit: KR C4 Additional equipment • Welding unit: FRONIUS TPS 400i (year 2017)

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: KUKA, This KUKA KR 6 R700 sixx robot arm was manufactured in 2018. It features a maximum load capacity of 6 kg and a reach of 706 mm, complemented by a KPC4 smallsize robot controller. Consider the opportunity to buy this KUKA KR 6 R700 sixx robot arm. Contact us for more information. • Max. load: 6 kg • Range: 706 mm • Controller: KPC4 smallsize-2 (smallsize robot controller) Hfodpfsx D Hiqox Ab Rof • Very good condition, only about 4000 working hours!

Condition: ready for operation (used), Year of construction: 2014, This Yaskawa Motoman ES165D robot arm was manufactured in 2014. It features a 7-axis configuration, enhancing its flexibility and precision for complex tasks. The system includes an Anmasi Maxiline 340 AUT washing machine and a LOGIMAT with 59 m2 storage area, ideal for efficient part handling and cleaning. Consider the opportunity to buy this Yaskawa Motoman ES165D robot arm. Contact us for more information about this machine. • Connected to Okuma MU-6300V Additional equipment • Yaskawa ES165D robot on 7 m 7th axis (linear track) • Anmasi Maxiline 340 AUT washing machine • LOGIMAT with 59 m2 storage area • Turning station for parts • Automatic change of vice and jaws Hfjdpfx Aeyf Ey Seb Rsf

Condition: ready for operation (used), Year of construction: 2023, overall weight: 445 kg, This ABB IRB 4600-45/2.05 was manufactured in 2023. It's a robot arm with a payload capacity of 45 kg and a net weight of 445 kg. This unit is new and never used, with three pieces available. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Hfedoyar R Tepfx Ab Rsf • New robot, never used

Condition: ready for operation (used), Year of construction: 2007, number of axes: 5, This 6-axis FANUC M-6iB robot arm was manufactured in 2007, featuring a robust design with a 380-415V power supply, digital servo function, and password protection. It includes a handling tool, basic software, and a CE sign option. Ideal for automation tasks requiring precision and reliability. If you are looking to get high-quality automation capabilities consider the FANUC M-6iB machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Units available: 2 • Standalone controller • Rdi/o: 8/8 • Input power voltage: 380-415v • Comprehensive mechanical and electrical specifications including full covers and support members. Hfedpfxsyaih As Ab Rjf Extra Information Controller Standard Setting Handling Tool Digital Servo Function Password Protection Space Check CE Sign Option Spare Fuse HMI DEVICE (SNPX) INTERNET CONNECTION PC INTERFACE Operation Box (Type C) Standard (DCS) (English/SYMBOL) (3 mode) Axes Control Card: 8 axes (Standard) Regenerative Discharge Resistor D Leakage Breaker 3.0/7.5KVA/380-500V (EMC) E-STOP Unit A Teach Pendant Cable: 10m Power Transformer Type E: 3KVA (380-415VAC, 440-500VAC) Fan Unit for A Cabinet A Door Switch/Standard Operation Box Connection Cable/Type C/4m 5 Slots I/O Base Unit (A cabinet) Hour Meter i Pendant/Dual/General

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,000 h, overall weight: 51 kg, controller manufacturer: KUKA, controller model: smartPAD, number of axes: 6, This 6-axis KUKA KR 6 R900 fivve was manufactured in 2014, featuring a maximum reach of 901.5 mm and a payload capacity of 6 kg. It operates efficiently with a cycle time of 155 cycles per minute and has been used for 18000 hours. Ideal for tasks requiring precision and speed in challenging environments, it maintains a protection rating of IP54. If you are looking to get high-quality robotic arm capabilities, consider the KUKA KR 6 R900 fivve machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits Hedpfxsx D Ekms Ab Rsff • Protection rating (in-line wrist): ip54 Technical Machine Benefits • Maximum reach: 901. 5 mm • Maximum payload: 6 kg • Pose repeatability: ± 0. 03 mm • A1: ±170 ° • A2: -186 ° / 45 ° • A3: 5 ° / 156 ° • A5: -111 ° / 120 ° • A6: ±350 ° • Operating temperature range: 5 °c to 45 °c • Protection rating: ip54 Extra Information Machine still under power Dimensions Machine Depth 320 mm

Condition: ready for operation (used), Year of construction: 2014, overall weight: 1,075 kg, This KUKA KR120 R3200 PA was manufactured in 2014. It features a software version V8.3.11 and has approximately 21,000 operating hours. It includes a Smartpad KCP, weighs 1075 KG, and can handle loads up to 120 KG with a range of 3195 mm. Contact us for more information about this machine. Hsdpfx Absx D Ib Uo Rjff • Software version: V8.3.11 • Operating hours: approx. 21,000 h • Load: 120 kg • Range: 3,195 mm Additional equipment • Smartpad KCP • The controller is not available

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis COMAU Smart NJ 40-2.5 was manufactured in 2019. It features a robust design with a comprehensive set of accessories, including a tool master and connection cables for seamless integration. If you are looking to get high-quality automation capabilities, consider the COMAU Smart NJ 40-2.5 robot arm we have for sale. Contact us for further details. • Description Qty Part Number: • RobotArm NJ 40-25 (Silver - Rel. 2.0): 1 CR82381400_9006ARM • Cover for robot distribution panel: 1 CR82341604 Hodpfx Aeynhnqeb Roff • DVD with system documentation: 1 CR17930160 • Kit connection cables RobotArm (size M&H) to Siemens RunMyRobot [L = 5m]: 1 CR18947980 • RAS-KC3 Cabling package for Siemens RunMyRobot (RobotArm size M&H): 1 CR17530168 • Set for manual mastering NJ robot family: 1 82314100 • Set for manual mastering NJ-40 NJ-60 [axis 5-6]: 1 82212400 • Screws and pins group for robot floor fastening: 1 CR82362500 • Tool Master (117mm): 1 81783801 • Standard Warranty: 1 SWUMP4

Condition: ready for operation (used), Year of construction: 2023, overall weight: 272 kg, This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine. Additional equipment • Accessories – for Overpressure Unit • Robot is from research project. Approx. 500 hours Machine Benefits Technical Machine Benefits • Reach: 2010 mm • Robot controller // robot-controller cables • Cs9 controller • Handheld control device with mount • Documentation on dvd • Connectors and accessories • Mode selector switch with cable • Maintenance unit – for overpressure unit • Kit connect ethernet • Kit connect i/o Hedpeyam E Eefx Ab Reff Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2018, overall weight: 140 kg, This KUKA KR 90 R3700 prime K robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision for various industrial applications. Consider the opportunity to buy this KUKA KR 90 R3700 prime K robot arm. Contact us for more information. Additional equipment Hfedpjyaiigjfx Ab Rjf • E S13 055 CTR PNT EPS AIR • E S36 038 CTR PNT EPS AIR Machine Benefits Technical Machine Benefits • Supply voltage: 3x400v • Frequency: 50/60hz • Charge full-load current: 22a • Mains fuse: 25a • Robot 1: 98,57 hours / robot 2: 136,17 hours Extra Information Second similar robot available.

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec Hfjdpfx Abex Enkns Rof • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: ready for operation (used), Year of construction: 2019, overall weight: 5,000 kg, number of axes: 6, This 6-axis ABB Schweißroboter Flex Arc was manufactured in 2019. It features a robust IRB 1660ID-6/1.55 robot type and a positioner with a payload capacity of 250 kg. The machine operates at a power consumption of 22 kVA and includes advanced safety features such as a vertical light curtain and integrated safety PLC. If you are looking to get high-quality welding capabilities, consider the ABB Schweißroboter Flex Arc robot arm we have for sale. Contact us for further details. • Supply voltage: 400 V • Phases: 3 Ph • Frequency: 50 Hz • Power consumption: 22 kVA • Duty cycle: 100% • Pre-fuse max: 3x63 A • Control voltage: 24 V Hfodsypb Elepfx Ab Rsf • Air pressure: 6 bar Additional equipment • Robot: IRB 1660ID-6/1.55 (quantity: 1) • Robot pedestal: 1,000 mm • Robot additional options: PC Interface • Controller: IRC5 Single • Controller voltage: 3x400 V • Controller frequency: 50–60 Hz • Controller rated current: 7 A • Controller short-circuit rating: 10 kA • Controller net weight: 150 kg • Positioner: B-500 • Payload: 250 kg (according to IRBP product specification) • Diameter: 1,000 mm (note: conflicting source text “1.000mg 500kg”) • PLC: Without PLC (integrated safety via safety PLC Pilz) • Loading area safety: Vertical light curtain • Safety PLC: Pilz • Operator detection: Pre-Reset • Service door lock: Euchner HASP • Service window: 1x with Euchner handle • Power source: Fronius TPS 4001, water cooled for ID • Communication: DeviceNet • Torch package: Fronius MTB 500i, water cooled for ID • Wire feed accessories: Lid attachment, Esab liner 4.5 m • Torch service center: ABB TSC • Wire cutter: Yes • SmarTac: Wire • Regula EWR: Mechanical • Pneumatical board: SMC 500 VP544 GCE Flow • Hoses to fixtures: 1x air • Fencing: C, R, B-250 • Fumehood: B250, 8500, B750 Welding • UV window: 1x • Lighting: Welding area switch • Software: Jahreslizenz RobotStudio CAD Konverter STEP • Accessory: Fronius welding system with welding wire feed attached to the system

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, overall weight: 34 kg, This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. • Axes: 6 Hfjdpfx Asx Tkbfeb Rof • Load capacity: 10kg • Range: 1300mm • Repeat accuracy: +/- 0.05mm • Rotation: 6-axis

Condition: ready for operation (used), Year of construction: 2022, number of axes: 6, This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 kVA. It meets CE, EMC, and EN55011 (Group 1, Class A) safety certifications. Consider the opportunity to buy this FANUC LR Mate 200 iD 14L robot arm. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Weight of the robot controller: 40 kg Hfsdpfx Aox Nr H Usb Ref • Input voltage: 200-230 v~ (alternating current) • Phases: 1 phase • Mains frequency: 50/60 hz • Safety certifications: ce, emc, en55011 (group 1, class a) • Robot is completely new and has 0 operating hours!

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,090 kg, arm reach: 2,655 mm, number of axes: 6, This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robot's footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine. • Repeatability: 0.05 mm • Max. wrist load: 165 kg • Robot footprint: 771 x 610 mm • Electrical supply: 380–575 V, 3-phase; 50/60 Hz • Average power: 2.5 kW • Integrated upper arm signals (In/Out, stop signals): 8/8 Hsdox D Eb Sspfx Ab Rsff • Integrated air supply: 2 • Sound power level: 70.5 dB • Ambient temperature: not specified • Protection rating (mechanical, standard/optional): IP54 / IP56 • Protection rating (wrist & A3 arm, standard/optional): IP67 Additional equipment • Hose assembly (dress pack): transports electricity, air, or water from axis 1 to axis 6

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,200 kg, total width: 2,500 mm, total height: 2,200 mm, product length (max.): 2,300 mm, number of axes: 6, This 6 axes MEI robot arm was manufactured in 2023. This system was manufactured for a project in the automotive industry. It features a total installed power of 26 kW and operates at a maximum peak air flow of 62.5 liters/min. The machine is equipped with a main control cabinet and various pneumatic components from SMC. If you are looking to get high-quality automation capabilities, consider the MEI robot arm we have for sale. Contact us for further details. • Total installed power: 26 kW • Supply voltage: 400 V AC • Frequency: 50 Hz • Control voltage: 24 V DC • Working voltage: 24 V DC / 220 V AC • Operating pressure: 7 bar • Air consumption per cycle: 5.75 liters (NRA) • Maximum peak air flow: 62.5 liters/min (ANR) • Main control cabinet with PLC • Safety controller • Power supply units • Circuit breakers • Protection switches • Industrial communication switch • Main pneumatic manufacturer: SMC • Cylinders: • SMC MGPM32TF-75Z • SMC MGPM32TF-175Z • SMC CD85N16-50-B • SMC LER50EJ-R5CL17 • SMC MXH16-30Z • SMC CDQMB16-30 • SMC MHS3-16D • Magnetic sensors: • SMC D-A93SAPC • SMC D-MP025C • Electronic pressure regulator: SMC ITV1050-ILF2 • Solenoid valves: • SMC JSY3200-5U • SMC JSY3100-5U Hfodpfx Abeyk Ut Sj Ref • SMC JSY3100R-5U • Mechanical stops: red neoprene M8 (Ref. 507208-M) Additional equipment • Robot: 6-axis industrial articulated robot • Rotary table: TAKTOMAT RTF650-B-6-1SL90 • Gear ratio: 16 • Maximum inertia: 46 kgm²

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,750 h, This ABB Roboter IRB 4400 was manufactured in 2009. It includes an IRC5 controller, a control panel, and a comprehensive set of documentation. Accessories feature an additional cable set and a Flex pendant. Ideal for automation tasks requiring precision and reliability. Contact us for more information about this machine. • IRC5 controller • Control panel • Cable set • Folder with documentation, circuit diagrams, etc. Hfjdpex Hblbsfx Ab Rsf Additional equipment • Flex pendant

Condition: ready for operation (used), Year of construction: 2007, This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine. Hfjdpfxjx D Np Ho Ab Rsf Machine Benefits Technical Machine Benefits • Weight (kg): 1202 • Laser power on the workpiece: 6000 w / typical power stability at nominal power: ±1% with active power control / continuously adjustable power range: 120 to 6000 w / beam quality at the input coupling in the llk: 8 mm / numerical aperture at the output coupling after the llk: 0. 1 / wavelength: 1030 nm / minimum diameter of the laser light cables: 200 µm / maximum number of laser light cables: 2 / maximum number of laser light cables with extended device size: 4 / ambient temperature: 10–50 °c • Mounted on ksl-2000/2700 linear axis (4 meters) / trumpf trudisk 6002 laser/ various inert gas welding machines with control systems

Condition: ready for operation (used), Year of construction: 2019, operating hours: 344 h, This STAUBLI TX60 robot arm was manufactured in 2016. It is in very good condition, almost like new, with only 344 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information. Hjdpfxsx D Sfde Ab Rjff Application Types Robotics

Condition: ready for operation (used), Year of construction: 2024, General Data Machine weight 41 kg Control Unit Brand FANUC Main Drive Number of axis 6 Hfedpfx Abox D Ezlj Rsf This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robot's joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information. Application Types Robotics

Condition: ready for operation (used), Year of construction: 2016, operating hours: 373 h, This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information. Hfjdpfxjx D Sd Hs Ab Rsf Application Types Robotics

Condition: ready for operation (used), X-axis: 3650mm, y-axis: 1350mm, z-axis: 300mm, acceleration: 10m/s², repeatability: less than 0.15mm (ISO 9283), max. travel speed: 60m/min, control: Sinumerik 840 D SL S7 300. The dispensing robot is designed for three-dimensional sealant bead application. With control cabinet, an on-site inspection is possible, not under power. Hodpfx Aoylzhfeb Reff

Condition: like new (used), I am selling a complete Yaskawe Motoman UPT 130 T robot. Hjdpfx Asu Tk H Dob Roff

Condition: good (used), Year of construction: 2013, In good technical condition and fully operational. 6-axis industrial robot with a payload capacity of up to 8 kg and a reach of 1,450 mm. Year of manufacture: 2013. Hsdpfx Aoyi Axyob Reff