Used sand blasting equipment for sale (136)

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Iodefnh Rvjpfx Abveap Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: new, Year of construction: 2026, Desciption in english language after demand. Iedpfx Aodulhvobvjap

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Iodpfxefv Au As Abvjap Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: new, Receiver capacity 80 l working pressure 4 - 8 bar Air consumption 250 - 800 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile jet unit with extraction Iodpfx Aof Nb Euebvsap Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors Iodpfx Ajxqzmkebveap - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), Year of construction: 1990, Description to follow! Iajdpfx Aboxzk Iljvjp

Condition: new, 0 830 x 530 x 530 mm operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. weight of the machine ca. 50 Kg 0,95 x 0,65 x ,7 cm Isdpoupw Sgefx Abvoap

Condition: new, 0 199,5 x 67,5 x 64 mm Iaodpfx Ajupxfzebvjp operating pressure 2,5 - 8,0 bar air consumption at 6 bar 350 l/min weight of the machine ca. 0,23 t dimensions 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter)

Condition: new, 0 1170 x 880 x 825 mm Iajdpfxsupxdws Abvsp operating pressure 2,5 - 8,0 bar dimensions 1,33 x 1,24 x 1,77 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,16 t

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Iodpfx Ajrq Hd Sobvjap Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: used, Year of construction: 2014, operating hours: 20,600 h, functionality: fully functional, Characteristics of the blasting machine Blasting purpose: Cleaning, deburring Abrasive (material and size): Steel abrasive Isdpew Slmrsfx Abveap Abrasive quantity (first filling): 3 t Workpiece material: Steel Workpiece temperature: Ambient temperature Conveying speed: 0.5 – 2.5 m/min Conveying width: 1,000 mm Conveying height: 500 mm Sound pressure level without noise insulation: > 85 dB(A)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Iodpfxorq Hmzo Abveap Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Possible to come and see in testing. Isdpeygnm Dsfx Abvjap

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping: 10-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy now◄◄ ✨Sandblasting kit with tank✨ ⭕ Outdoor sandblasting, indoor sandblasting, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Pot Pressure Sandblasting Pot - Technical Specifications ✔ Working pressure: 7 bar ✔ Abrasive type: steel grit, steel ball, garnet, glass ball (glass sand), etc. ✔ Air consumption: liters/min is shown in the table below. ❓What is a pressure sandblasting pot❓ ✨ A pressurized sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit anywhere outdoors to sandblast non-transportable surfaces (buildings, large steel structures, etc.). It can also be used in sandblasting rooms to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ At Proton, we have standard sandblasting pots of 50 l, 100 l, and 200 l. We can also supply various sizes of blast pots depending on your needs. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblaster is not affected by the environment. Iasdjfvqixepfx Abvep ⚡️Areas of Use of the Sandblasting Pot⚡️ To achieve the required surface roughening before painting and coating, this system is used in areas where cleaning and decorative shaping are desired. The main applications are; the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard blast pot sets are supplied with the following equipment.✳️ SANDBLAST POWDER 200 L ►1 Sandblasting Control Valve ►1 Remote Control Valve ►1 Quick-Release Silencer ►1 Water Separator Regulator ►1 Remote Control Handle ►1 Sandblasting Flow Diverter "Y" Connector ►1 Set of Barbed Fittings ►20 Meter Sandblasting Hose ►40 Meter Pneumatic Twin Hose ►1 8 mm Venturi Nozzle ►1 39 mm Nozzle Holder (MHE-1) ►1 Sandblasting Mask ►1 Overall ►1 Pair of Gloves ►1 Sandblasting Bag ►1 2-outlet air stand ►20 m breathing air hose and connection sockets ❗❗❗ Compressor features required for sandblasting tanks Motor power: 37 kW - 50 HP, air flow: 6.25 m3/min, 7-8 bar pressure; a compressor with the required specifications is required. A screw compressor is recommended. ❗❗❗

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Ijdpfx Abjwdpq Hsveap ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  Isdjghbkyopfx Abveap This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. Iodpfxokw Ukue Abvoap •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Product description: Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. Iaodegha A Sspfx Abvsp The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 22 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping possible : 25-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ Iaodpjfw Nfhefx Abvop ✳️FEATURES A blast cabinet is an effective way to clean, deburr, finish and prepare a variety of materials. No matter what type of media you use (alumina, glass beads, silicon carbide, plastic beads, or organic materials, etc.), blast cabinets designed for continuous blasting will undoubtedly increase your production and reduce your costs by eliminating these manual, labor-intensive operations such as Replace grinding, dry cleaning, acid etching, wire brushing and deburring. Here at Proton we have a wide range of blast cabinets to suit your specific application, including various sizes of light blast cabinets, high pressure blast cabinets, wet blast cabinets and more. ✳️TOP QUALITY BLAST CABINETS✳️ As the market leader in industrial blasting and sandblasting, sand and media blasting cabinets, our team is proud of our reputation. We've earned this reputation thanks to our focus on customer service and the decision to only ship high quality blasting cabins and equipment. Our trusted suppliers understand your needs and build their equipment to last. Our high-quality media blast cabinets are easy to maintain and made from high-quality materials, so you have less downtime. ►►►SV-1000 BLAST CABINETS◄◄◄ ✨Sandblasting booth technical specifications ✨Air consumption: 300-1000 lt / min ✨Working pressure: 2-12 bar ✨Grinding type: glass ball (glass sand), aluminum oxide, etc. ✨WORK SPACE (mm ) : 1000 X 800 X 750 ✨EXTERNAL DIMENSIONS (mm) : 1100 X 1250 X 2000 ✨DOOR DIMENSIONS (a x h mm) 670 X 630 ✨FILTER TYPE AND QUANTITY: CARTRIDGE FILTER - 1 PIECE ✨AIR CONSUMPTION ( m3 /min ) 1 m3 / min ( 1000 lt/min ) ✨ELECTRICITY 380W ✨ TURNTABLE DIAMETER 420 mm. ✨WEIGHT CAPACITY OF THE TURNTABLE 350 kg ✨CART FOR LOADING Available ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. Ijdpfxeghaywo Abvsap The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 8-10 weeks after receipt of payment! ✅Important note: If you would like to receive a quote for a blast cabinet, please use the blast cabinet configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ 💥 SR-LINE – Industrial blasting rooms for XXL applications 💥 🔧 Maximum performance, robust construction, sophisticated design! Whether railway wagons, construction machinery, aircraft, or military vehicles – with our SR-LINE blasting rooms, you can process even the largest and most complex workpieces reliably and efficiently! Our blasting rooms offer a safe, clean, and high-performance environment for every type of surface preparation – be it cleaning, roughening, or smoothing. _____ 🧩 Complete system with all essential components: ✅ Spacious main cabin with rubber lining to protect against wear ✅ Emergency exit doors with safety windows ✅ High-performance sandblasting pots in various sizes ✅ Pneumatic or mechanical abrasive recovery system ✅ Efficient dust collection system to maintain air quality ✅ Aftercooler, filter units, and robust steel construction ✅ Main control panel for centralized control ✅ Lighting system for perfect visibility in the room ✅ Optional: Overhead cranes, workpiece trolleys, wall-mounted multi-axis units for improved handling _____ Iodpfxjghawme Abvoap ♻️ Economical & sustainable thanks to recovery system The used blasting abrasive is collected automatically or manually and returned to the cycle – saving resources made easy! _____ 🔒 Safety & comfort according to EU standards Our systems comply with applicable CE and safety standards and are equipped with optional sound insulation for a more pleasant working environment. 💨 Fresh air systems with fans or suction lines ensure optimal air supply during the blasting process. _____ 📦 What does the SR-LINE blasting system include? • Blasting cabinet • Workpiece entry door & operator door with panel • Interior lighting & rubber lining • Blasting pot & abrasive container • Recirculation system with scraper blades • Dust filter & aftercooler • Hoses, lines & main control panel • Robust support structure ⚠️ Compressor and compressed air tank must be purchased separately. A suitable air duct is recommended. _____ 🚀 Why SR-LINE? ✔️ Customized planning for your application ✔️ Extremely durable materials & components ✔️ Designed for high performance and continuous operation ✔️ Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞 Contact us now for a customized quote – we'll be happy to advise you! 🛠️ SR-LINE – Your solution for large-format blasting technology. ☀️ 2-YEAR WARRANTY ☀️ ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2004, condition: reconditioned (used), RUBBER BELT SHOT BLASTING MACHINE WITH FILTER Designation: Rubber Belt Shot Blaster Brand : Wheelabrator Type: MB 300G Belt Type: Rubber Belt Iajdpfx Abohxyzkovop Charge max. kg: 800kg Shot Wheel: 1 Pieces with 18,5kw Belt width: 1.200mm Fill weigth: 300 liters Consisting of: - Rubber Belt Shot Blaster Typ: MB 300G - Main Panel - Filter - Outlet Vibro - Hydraulik Loader Preis: Verladen auf LKW Price: Loading on Truck Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Lieferung / Montage / Inbetriebnahme / Schulung OPTIONAL: delivery / assembly / commissioning / training Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: used, functionality: fully functional, compressed air connection: 4 bar, inner dimension width: 800 mm, inner dimension length: 800 mm, inner dimension height: 1,200 mm, workpiece weight (max.): 500 kg, For sale: used overhead rail shot blasting machine from manufacturer Berger. Good used condition appropriate for its age. 2 blast wheels, connected load approx. 30 kW. Internal lining made of manganese steel. Bucket elevator belt has been replaced. Central lubrication. Circuit diagram and operating manual available. Machine can be inspected under power at location, 66802 Überherrn. Iaedpswphb Usfx Abvsp

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 20,000 mm, total height: 10,000 mm, total length: 14,000 mm, inner dimension width: 6,000 mm, inner dimension length: 8,000 mm, inner dimension height: 3,200 mm, Equipment: cabin, compressor, documentation/manual, lighting, Robotic shot blasting chamber Blastman B20CX, equipped with a full abrasive recovery system, filtration, pressure vessels, and control system. The cleaning robot is in virtually new condition (last upgrade in 2024). The system is designed for both automatic and manual shot blasting of steel structures, castings, large-scale components, and parts requiring high repeatability and cleaning efficiency. Key technical information: • Robot model: Blastman B20CX • Year of last upgrade / year of chamber manufacture: 2024 / 1998 • Working chamber dimensions: 8 × 6 × 3.2 m • Robot arm reach: 2750 mm (telescopic) • Operating modes: automatic / manual • Media: steel shot, electrocorundum • Performance: up to 200 m²/h • Robot technical condition: as new, minimal signs of wear (last upgrade in 2024) Scope of supply – complete system: Iedpfx Ajx Rzlcobvoap • Blastman B20CX shot blasting robot • Chamber lined with wear-resistant material • Abrasive screw conveyors and distribution systems • Pressure vessels • Pneumatic and hydraulic installation • Filtration system • Operator's cabin • Lighting and complete control system Full technical documentation, additional photos, and a demonstration video of the machine can be provided upon request. The machine is available for immediate inspection. If interested, we are happy to arrange a visit.

Condition: excellent (used), Year of construction: 2012, operating hours: 8,500 h, Rösler ST 700 PS Blasting System TECHNICAL DATA Year of manufacture: 2012 Operating hours: Approx. 8,500 h System width: 1,270 mm System depth: 1,050 mm System height: 1,640 mm Blasting chamber width: 740 mm Blasting chamber depth: 760 mm Blasting chamber height: 490 mm Blasting gun/air nozzle diameter: 2-3 mm Blasting gun/air nozzle diameter: 6.5 mm Iedpfx Aewf Hmbebvoap Nozzle material: Ceramic or boron carbide Air consumption at 5 bar / hour: 13 - 30 m³/h Filter area: 2.5 m² Extraction capacity: 150 m³/h Fan power: 0.25 kW SCOPE OF OFFER INCLUDING (non-exhaustive list): Rösler Blasting System Container / Basket Extraction / Filter System Exact scope of supply as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.