Used Separation technology for sale (105)

Year of construction: 2024, Condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. Djb Exniodubpue Rjkl This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: ready for operation (used), Year of construction: 2016, FEEDER VIBRATOR Brand: SPALECK Type : SFLU 1600 Dkjb Exjvdkxtjni Rjl Including chassis Perfect condition, ready for use. Available unless sold in the meantime.

Condition: used, Technical information: - Engine power - 11 kW - Maximum engine diameter - 690 mm - Minimum engine diameter - 150 mm -Two types of clamping jaws Dkobovuqn Nj Exni Rjl - Foot switch - Weight - 1250 kg - Dimensions - 2950 × 1150 × 1250 mm - Control panel with an electrical security system For further information please refer to the technical data sheet or request it.

Year of construction: 2023, Condition: new, With the patented REMAV light-weight separator LA1200, they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye! It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight separator can be integrated easily into any existing recycling plant. Dksb Eofbb D Ajxni Rsl Due to the compact dimensions of the system, the screen trestle is easy to transport and can be loaded by wheel loaders with a bucket width of up to 2.70m.Integrated forklift shoes and lifting eyes ensure easy loading of the sieve box. The low task height of only 2.10m also makes it possible to load smaller wheel loaders. The basic machine is designed as single decker, but can be extended for fine screening up to 6mm at any time by means of retractable Unterdeckelemeten. This gives the option to separate the feed into 3 fractions. The sieve system is electrically powered and only needs 2KW/h.

Year of construction: 2005, Condition: ready for operation (used), Zig-zag fine material separator Cross section: approx. 500 / 300 mm For the separation of fines from the regrind Equipment: 2x rotary valve type NU 250 With Vulkollan seal, each 0.37 kW, Dkob Exsf Rlc Dsni Rjl 1x material conveyor blower type MFT 75/500, 11 kW

Year of construction: 2025, Condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Dsb Eochb Ryjxni Rskl Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Condition: excellent (used), Functionality: fully functional, Goudsmit Magnetic permanent strip Deb Exjvdp R Ieni Rskl Frame length = 1800 mm Strip width = 800 mm Dimension Block Magnetic = 1100 X 780 mm Drive = 2.2 KW gearbox

Condition: as good as new (ex-display), Year of construction: 2023, fuel type: electric, power: 5.5 kW (7.48 HP), color: grey, fuel: electricity, This machine is a cable stripping machine / radiator recycling machine, the machine has a cross section from 20mm to 80mm. The motor has 5,5KW. The dimensions of the machine are 87*57*135cm, the weight is 320 kg. With the machine you can, for example, get the copper or aluminum from the radiator of an air conditioner. Deb Exst D Dp Ueni Rokl But you can also use it to strip a wide variety of cables in the range from 20 - 80mm This machine is new and unused. If you are interested, please feel free to contact us at any time, we look forward to hearing from you!

Condition: ready for operation (used), Drum Screen Terra Select plus feeding conveyors Djb Exnevnmcvsi Rjkl

Condition: used, Year of construction: 2007, Functionality: unexamined, Complete plant for cleaning, treatment and classification of green molding sands for sale. The plant consists of conveyor belts with weighing scale, vibrating feeders, vibrating screens, pumping units, storage silos for incoming and outgoing product, overband, sand cleaners, dryer, buckets, trommels, water cooler, scrubber, filter press, dust suction... electrical panels included. Few hours of use. All the technical information of the plant is available. Dkeb Exniet E U Ece Rol Complete installation for cleaning, treating, and classifying green molding sands for sale. The installation includes conveyor belts with weighing scales, vibrating feeders, vibrating screens, pumping units, storage silos for input and output products, overbands, sand cleaners, dryer, buckets, trommels, water cooler, purifier, filter press, dust extraction system, and electrical panels included. Few hours of use. We have all technical information of the machines.

Year of construction: 2025, Condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Dkeb Exnsvmxvfoi Rel Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Year of construction: 2025, Condition: new, Zig Zag Air Sifter Dsbechb Ruj Exni Rekl Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: like new (used), Optical glass sorting machine, virtually new demonstration machine. Vibratory feed hopper included Dkob Exniovdqh Ij Rol Belt width: 1500 MM Sorting grain size: 5-50 MM Worn parts will be fully operative Software will be upgrated to letest version

Year of construction: 2025, Condition: new, drum inner diameter: 370 mm, drum length: 1,300 mm, type of motor: three-phase motor, The Mizar Electrostatic Separator is a high-performance machine designed to precisely separate fine materials from mixed recycling streams. By utilizing electrostatic charging, it efficiently distinguishes between conductive and non-conductive particles, making it ideal for complex materials like plastics, metals, and minerals. ✅ High Material Purity – Ensures exceptional separation and product quality. ✅ Customizable Operating Parameters – Tailors to specific recycling needs and material types. ✅ Energy-Efficient – Optimizes energy consumption and reduces operational costs. ✅ Ideal for Final Stages of Recycling – Refines materials for downstream applications. ✅ Durable & Low-Maintenance Design – Built for consistent performance with minimal downtime. Technical Specifications Drum Length: 1300 mm Drum Diameter: 370 mm Heaters: 4 units, 1000 Watts each Drum Motors: 2 units, 1.1 kW each Feeding Screw Conveyor: 1.5 kW, with speed controller Vibration Motor: 0.37 kW, with speed controller Electric Components: Siemens Hydraulic Components: Bosch Rexroth 1 Year Guarantee Dksbowbuyho Exni Rol

Year of construction: 2024, Condition: new, Overband magnet Length: 2500 mm Height: około 400 mm Width: 1000 mm Belt width: 750 mm Magnet width: 500 mm Magnet length: 1044 mm Power: 1,5 kW(hydraulic or electric) Magnet field: 400 Gauss(may catch 100 mm pieces from maximum distance 300 mm Overband new, 12 months warrenty, Dkeb Exsh U R Tgoni Rsl

Condition: new, Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: Deb Exnju Dg Uhei Rskl non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: good (used), Dust cyclone Stainless, dust separator, used machine -inclusion dimensions: 1900x1600x6200mm - mantle size: diam. 1600x5200mm -stem dimensions: 630x310mm; diameter 280 - weight: 800 kg Dkob Esttvrfsxni Rsl

Year of construction: 2025, Condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Djb Exniochb Sbs Rjkl 450mm, 600mm, 900mm.

Condition: new, Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, table length: 3,000 mm, It is primarily designed for use in recycling of waste cables (used to separate copper or aluminium particles from plastic ones), but because of its unique design it is also applicable for the separation of different particles (eg. the electronic waste, the recycling of automobiles and industrial radiators, the recycling of batteries, catalysts, or for the separation of any two particles of different specific gravity). Dsbeuzyfhs Exni Rekl A new version with double beds enables high throughput of material with very high purity of the obtained fractions (copper) and copper loss is reduced to zero. The machine is equally efficient in the separation of the granules obtained by grinding of solid cable and granules of so called hair wire. Unlike the dry separator, here in plastic there are no copper particles. Several companies bought it just to screen the plastic they got by recycling of cables with dry separator and thus additionally extracted copper from the plastic (up to 10%). There are standard three sizes that can recycle 350-1000 kg of ground mass per hour, but on request there can be larger performances (the machine code is also the size of table). The machine is extremely quiet and peaceful and is not it necessary to additionally be fixed on the ground (foundation). One can easily be built on your existing recycling line or we can offer you the cable granulator, and conveyor belt for material supplying from granulator to separator or from the separator.

Condition: new, Year of construction: 2025, Efficient Metal Separation with Mizar MDS Series Semi-Magnetic Drum Separators! Mizar’s MDS Series Semi-Magnetic Drum Separators are engineered to deliver precise and efficient separation of iron-based metals from bulk materials and conveyor-fed products. Whether you're in recycling, mining, or manufacturing, the MDS Series ensures maximum metal recovery with minimal energy consumption. 🔹 Why Choose MDS Series Drum Separators? ✅ 13,000 Gauss Internal Magnetism – Delivers powerful internal separation capability. ✅ 4,000–5,000 Gauss Surface Magnetism – Ensures efficient capture of ferrous particles. ✅ Constructed with AISI 304 Stainless Steel – For superior durability and corrosion resistance. ✅ Energy-Efficient Operation – Reduces operational costs without compromising performance. ✅ Easy to Install & Maintain – User-friendly design for minimal downtime. Deb Eswaw Eqjxni Rekl Whether you're handling shredded materials, granules, or powders, the Mizar MDS Series helps you achieve cleaner end products and greater process reliability. 💡 Ideal for use in cable recycling, WEEE, plastic, wood, and other material separation lines. 📩 Get in touch to find the right solution for your facility!

Year of construction: 2014, Condition: repair required (used), Functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Dsb Exniotu U Ebo Rjkl

Year of construction: 2024, Condition: new, DRUM SEPARATORS (SBZ-340 / SBZ-640) Application description: Drum magnetic separator designed for automatic removal of ferrous particles, especially low magnetic particles (paramagnetics) in recycling processes. Usually installed freestanding at the belt conveyor discharge or in-line connected to pneumatic loading. Used for bulk materials as a second stage of magnetic separation. Description of operation: Dksb Exsua D Rvoni Rjl The rotating surface of the drum transports the imparted material through a fixed magnetic core. The magnetic core attracts magnetic elements to the rotating surface, where purification by the carriers takes place. The attracted material is directed behind the manifold. The non-magnetic material falls freely. Construction description: SBZ magnetic drum separator equipped with WNZ type magnetic drum built with magnetic core on magnets (NdFeB) enclosed in a sealed stainless steel shell. It generates a very strong magnetic field that affects low magnetic metals. The magnetic core is located at half the diameter of the drum. The drum is equipped with material directing flanges and four carriers. Driven by an electric motor and a gearbox. Drum feed made of stainless steel with adjustable three-stage material braking. The drum is enclosed in a practical housing suitable for connecting a dust collection system. Below the drum there is an adjustable material separator. The entire separator is located on feet, screwed to the upper body. Models of drum separator: SBZ-340 Technical data: Magnetic drum type - WZN-340 Working width of the magnetic drum - 340mm Magnetic field intensity - ~ 4000 Gaus Source of magnetic field - NdFeb magnets. Adjustment of magnetic field inclination. Number of takers on the drum - 4pcs. Three-stage braking of the material. Drive - 0,55 kW. Efficiency - (depends on the type of material) Possibility of using dust collection system SBZ-640 Technical data: Magnetic drum type - WZN-640 Working width of magnetic drum - 640mm Magnetic field intensity - ~ 4000 Gaus Source of magnetic field - NdFeb magnets. Adjustment of magnetic field inclination. Number of takers on the drum - 4pcs. Three-stage braking of the material. Drive - 0,75 kW. Performance - (depends on the type of material). Possibility of using a dust collection system.

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Dob Exnisnt Uc Re Rskl Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Year of construction: 2023, Condition: new, Motecha sink float separation tank with two cones is used for separation of plastics with various densities (PP/PE). The Sink Float Tank separates floating material from sinking material. Capacity: ≈ 4,5 t/h (Depends on the material) Volume of the tank: 25 m3 the tank: 25 m3 Material: Stainless steel AISI 316, t=4 Total power: 12 kW Floating surface: 18 m2 Dksb Exonfvyueni Rjl Total weight: 7000 kg Maximum fraction size: < 60 mm Overall dimensions Length: 7400 mm Width: 3400 mm Height: 5600 mm Working dimensions Length: 6000 mm Width: 3000 mm Depth: 3700 mm

Year of construction: 2022, Condition: new, New plastic washing machine (LDPE/LLDPE, PE, PP, Hard plastics,). Sink-float separation tank. (SFT with two screw conveyors) Capacity - 2t/h Djb Exjfumhvoni Rokl Material – stainless steel AISI304, t=4 mm Depth - 1700 mm +/100mm Width - 2000 ± 20 mm Length - 6000 ± 100 mm Volume - 13 m3 Weight – 6000 kg Total power – approx. 10 kW Sink shaft with paddles, 1 unit Carrying shafts with paddles, 5 units Output shaft with 5 paddles, 1 unit Screw conveyors: Horizontal shaftless screw conveyor for output of sinking material D480 mm, trough D500x4 mm, length ~5m, 1 unit. Screw – S355 Rising with shaft screw conveyor for output of sinking material D480 mm, trough D500x4 mm, length ~5m, 1 unit. Screw – AISI304 (position can be changeable: front or back position of sink float tank) Motecha scope of activity: Equipment for recycling and waste management industry Factory planning and project management (automatic sorting lines, pp/pe washing lines) Specific product design and development Manufacture Installation, upgrades and service Motecha, UAB products: Conveyors (Belt, chain, screw, chain-tube); Dosage bunkers with moving floors systems; Plastic waste washing machines; Industrial platforms, steps; Non-standards projects according to customer needs