Year of construction: 2017, Condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Djb Etjuanq Tstwvskl

Condition: new, Year of construction: 2023, warranty duration: 12 months, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, JUKI AMS221EN 30X20 Dob Ettstwfapswvskl

Condition: new, Year of construction: 2025, Functionality: fully functional, Embroidery machine for professional use model VOI 215: Heads: 2 Needles: 15 Application: hats / t-shirts / flat embroidery / etc. Embroidery area: 400 x 500 mm Hat embroidery area 270° Maximum speed: 1000 SPM Motor: Servomotor Included with the embroidery machine you will find: frames of various sizes, including one for hats; Dksb Etou Hxicotwvel bobbin winders; additional table for large-scale processing; case with various tools for using the machine. New in prompt delivery!

Condition: like new (used), Year of construction: 2018, Danube Industrial Laundry Dryer Powerful dryer with condesator for hotels, pensions and large families We also have a suitable washing machine 32 Ah connection Dksb Ettjc Utidowvel TOP CONDITION CAN BE TAKEN IMMEDIATELY IN OPERATION WITH QUESTIONS PLEASE ANNOUNCE VIELLENDAN IN ADVANCE

Condition: excellent (used), Durkopp Adler 767 20 pcs in stock / many models Dksbsv Nphdo Ettwvjl Can be used on both 220V and 330V

Condition: like new (used), Year of construction: 2016, operating hours: 210 h, Functionality: fully functional, working width: 1,800 mm, type of cooling: water, This Reliant Powerbond HPC, 1800 mm width High Pressure Laminatint Line contain the following unites: - Unit 1 Reliant Powerline non driven unwind unit - Unit 1A Lightweight table designed to support sheets during feeding - Unit 2 Reliant Powerline Powder Coating unit - Unit 3 Reliant Powerline 3000 mm PTFE Conveyor - Unit 4 Reliant Infrared Pre-Heating System Djb Ettwev Tmxnjvjkl - Unit 4A Unwind shaft roll support for surface friction or centre unwinding - Unit 5 Reliant Powerbond-HPC-180 Haevy Duty, High Pressure Laminating Machine - Unit 5A Laminating Line Control Unit - Unit 6 Reliant Powerline Centre Driven Rewind System - Unit 7 Reliant Chiller Unit-I416 More details about the units can be found in the attached pdf file. Loading of the machine on the transport vehicle is included in the price. The transportation of the machine should be provided by the buyer.

Year of construction: 2011, Condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile dyeing machine Mathis BFA 12, beaker: 2x1000ml, temperature range: 20°C-140°C, temperature gradient: 0.3°C-5°C/min, infrared radiators: 3, cooling unit capacity: approx. 9l/min, rotating disk speed: 65rpm, machine dimensions X/Y/Z: approx. 550mm/675mm/760mm, weight: approx. 100kg, control: Univision. 2) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 3) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 4) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 5) Digital microscope Di-Li. 6) Light box Just color Viewing Light. 7) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Dksbouanrwe Ettwvol

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm Dkjbsr I Am He Ettwvol with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: ready for operation (used), Year of construction: 2021, A Vetron Typical hot-air welding machine for continuous seam sealing is available. Heating power: 700W, max. welding speed: 12m/min, material thickness: 0.2mm/20mm, air temperature range: 20°C-600°C, air volume: 50l-450l/min, weight: approx. 50kg. Documentation available. On-site inspection is possible. Dkjb Ettet Darlewvol

Condition: good (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal Dkob Ejr Ix Igsttwvel

Year of construction: 1985, Condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Dsbsrm S Exo Ettwvekl

Condition: ready for operation (used), Year of construction: 1988, Connected load: 3.5kW, was maintained regularly, an inspection is possible. Dob Ettern Rdtowvekl

Condition: ready for operation (used), Year of construction: 2015, Two Meyer fusing machines are available for the textile industry. 1) Fusing machine Meyer RPS L-400, year of manufacture: 2015, fusing width: 400mm, connected load: 3.3kW, belt speed range: 1m-9m/min, max. pressing pressure: 50N/cm², max. temperature: 200°C, machine dimensions X/Y/Z: approx. 1700mm/900mm/450mm, weight: approx. 150kg. 2) Fusing machine Meyer RPS-L, year of manufacture: 2002, fusing width: 600mm, max. temperature: 200°C, belt speed range: 1m-9m/min, connected load: 5kW, max. pressing pressure: 35N/cm², machine dimensions X/Y/Z: approx. 1700mm/1100mm/450mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Djbsu N Hdme Ettwvekl

Condition: ready for operation (used), Year of construction: 2010, A CNC 8-head embroidery machine from Sewmaq is available. Head interval: 400mm, embroidery area X/Y: 400mm/540mm, table size X/Y: 340mm/4210mm, weight: approx. 1250kg, control: BECS-316/366. On head no. 5, the slide bearing of the rotary hook is defective and must be replaced. Documentation available. On-site inspection is possible. Dkob Ettwot Dppmovol

Condition: ready for operation (used), There are seven (7) 1-needle flatbed sewing machines and one (1) 1-needle pillar sewing machine available. 1) Adler 1-needle flatbed sewing machine. 2) Global WF 1S15 AUT. 3) Pfaff 1425. 4) Global LP 9226 LH-R 1-needle post bed sewing machine. 5) Pfaff 1425. 6) SEWMAQ SW 898. 7) Minerva. 8) Pfaff 1425. Dksb Ettwstzdfkjvsl

Condition: ready for operation (used), Year of construction: 1986, Working width: 2400mm, Torch: Manufacturer: Maxon, Type: Valupak MF 300, Year of manufacture: early 2000s, Overall dimensions X/Y/Z: approx. 43m/6m/5.5m, Operating hours: 76761h, Control system: Monforts Matex-Color. Including Zimmer coating system and pre-drying system. Documentation available. On-site inspection is possible. Dkjbet H Rdke Ettwvjl

Year of construction: 1994, Condition: ready for operation (used), Working width: 2500mm, output: 500kg/h, working speed: 30m-140m/min, materials: PES/PA 1.7-4dTex 40mm-60mm, control: Siemens S7 PLC. Including motors and control panel, but without cables. The control cabinet was overhauled in 2009. Documentation available. The machine/control cabinet was part of a nonwovens production line - modifications to the control system may be necessary. Deb Ettweubb Afovjkl

Condition: ready for operation (used), Year of construction: 1997, Three identical weaving machines used in the plastics industry are available. Working width: 1900mm, weft insertion: 8 colors. On-site inspection is possible. Individual sale is possible. Dkjb Ettju Izrpjwvol

Year of construction: 2002, Condition: ready for operation (used), Max. package height: 120mm, min. bore diameter: 20mm, wire diameter range: 0.1mm to 1.6mm. Weight: 1500kg. Control defective. Report from Aumann available. Documentation available. Dkjb Ettstgvduswvsl

Condition: ready for operation (used), Number of winding positions: 840, an on-site inspection is possible. Dkjb Ettopfc H Sswvol

Condition: ready for operation (used), There are two identical machines available, machine 1 is missing the table, machine 2 needs service, both are functional, working width: 1800mm, table length: 16,000mm, with documentation, an on-site inspection is possible. Dkjb Ettwjq T Sinovjl

Year of construction: 2005, Condition: ready for operation (used), Working width: 2200mm, product speed: 3-50m/min, warping cylinder rotational speed: 600-1200/min. Djbsd Ddngo Ettwvskl

Year of construction: 1995, Condition: ready for operation (used), Max. roll diameter: 400mm, height: 1753mm, documentation available. Dsb Etefwml Rotwvokl

Year of construction: 2000, Condition: ready for operation (used), Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation. Dksb Ejiy D Agettwvjl

Year of construction: 1996, Condition: ready for operation (used), Working width: 2300mm, max. roll diameter: 1500mm, working speed: 180m/min, including crane track and longitudinal cutting system, shaft, belt and wiring overhauled. Dkeb Ettwjd Hr Uzjvol