Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request! Dodpfx Aijuzhqrexjuu

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Laying Machine TLMX - 112, TAJIMA ELECTRONIC LAYING MACHINE STITCHING FIELD: 1000 mm x 375 or 400 mm W-MACHINE: Deactivate every second head. Stitching width on 6 heads: 750 mm HEADS: 12 laying heads / 6 laying heads in double width NEEDLES: 12 HOOK UNDER THREAD: Jumbo (enlarged bobbin with 1/3 higher under thread capacity) DISPLAY: 6.5" color display INSULATION: Standard dust protection TOOLS: Standard maintenance toolkit ACCESSORIES: Standard production accessories NEEDLES: Standard needles included INSTALLATION: 4 days included TWELVE WIRE FEEDING DEVICES Tube guidance for feeding 360° rotation, limited Supports wire bobbins up to 15 kg PREPARED FOR LEFT-RIGHT AFC Front table: extended X-drive: extended Dujdpfx Aeylxqqeixsu Automatic Frame Changer: pneumatic FABRIC ROLL STANDS: left and right - Left: automatic fabric unwinding - Right: semi-automatic fabric winding FABRIC CLAMP: Front and back only MOVEMENT: X-axis mobility WIRE CUTTER (12 sets) - Pneumatic cutting system - Main beam-mounted, fixed cutting position AUTOMATIC UNDER BOBBIN CHANGER (UBC) (12 sets) - Automatic under bobbin change - Bobbin changer located directly in front of the machine table—no need to access under the machine SOFTWARE WIRE LAYER - BASE: Adobe Illustrator - IMPORT: Vector data import functionality - FUNCTION: Automatic stitch file generation using vector data (Online training included) NEEDLE DETECTION DEVICE (12 sets) - Machine halts if a needle contacts wire (requires special wire spools) - Indicator light on head signals contact

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Duodpfxeyl Ubfj Aixeu Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Year of construction: 2014, condition: excellent (used), Double finisher 842 Multimatic with control unit, year 08/2014, NP 20110 €. Wardrobe former and trouser topper rotatable on one column finish drain in closed cabin integrated cabin exhaust automatically controlled doors close automatically flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory locations air volume regulation for particularly sensitive garments space-saving and virtually no stress in the work area due to finishing process externally steam-heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & co? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, coats, trousers and similar items can be finished automatically. It consists of a form finisher and a trouser topper. The two units are rotatably mounted on a column. For finishing, the previously loaded element (form finisher or topper) is swivelled into a cabin. The doors close automatically and the finishing process takes place in the closed cabin. Dusdpfx Aegtidhsixju Automatic finishing, high performance, energy-saving, low-noise, small footprint. Year of construction: 08/2014 New price: 20.110 €. Unit runs perfectly Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2023, functionality: fully functional, We offer this used embroidery machine ZSK Racer 4S classic, year of manufacture 2023. Manufacturer: ZSK Model: Racer 4S classic Year of manufacture: 2023 Condition: used Djdey Dgqdjpfx Aixeuu If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 6,370 mm, total length: 2,150 mm, total height: 2,300 mm, overall weight: 4,800 kg, 340cm sticky belt printer equipped with 8 NEW Kyocera print heads, printer condition like new. In operational status Duodpfx Ajxvb Ufoixsu

Condition: like new (used), heavy buttonhole . adler 580-321 and adler 559-151 Perfect condition Warranty & Delivery Component: complete delivery machine The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. WORLDWIDE DELIVERY ! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Dedpfxjt Ecwtj Aixjuu

Condition: ready for operation (used), A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible. Duedpfx Aiew R U Aasxju

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Duodpfjx Eg Upsx Aixou For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Dujdpjyx I Duefx Aixju

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43246, working width: 300 mm, Possible Technical Specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26" to 48". Gauge (fineness): E14 to E60. Number of feeders: 3.2 per inch (e.g., 96 feeders with a 30" diameter). Speed: Up to 25 revolutions per minute at a 30" diameter. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Supplied complete with accessories. Including enclosure Additional information: Duodpfowt Rfdox Aixeu Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Number of needles: 2808 pcs Needle Ø: 0.91 mm Number of yarn spool holders: 100 pcs

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 46493, Possible technical specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26″ to 48″. Gauge: E14 to E60. Number of feeders: 3.2 per inch (e.g. 96 feeders at a diameter of 30″). Duodpfxjwt Rwme Aixju Speed: Up to 25 revolutions per minute at a diameter of 30″. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive industry, and mattresses. Complete with accessories. Including rim/guard.

Condition: used, functionality: unexamined, machine/vehicle number: 35484, working width: 3,000 mm, Possible technical specifications (based on comparable models) Type: Single jersey circular knitting machine with four needle tracks. Cylinder diameter: 26″ to 48″. Gauge: E14 to E60. Number of feeders: 3.2 per inch (for example, 96 feeders with a 30″ diameter). Speed: Up to 25 rotations per minute at a 30″ diameter. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Complete with accessories. Including enclosure. Additional information: Length (machine): 3000 mm Dujdpfewt Ricox Aixou Width (machine): 3000 mm Height (machine): 3000 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Number of needles: 2808 units Needle Ø: 0.91 mm Number of yarn bobbin holders: 102 units

Condition: used, functionality: unexamined, machine/vehicle number: 41254, General technical specifications of the INOVIT 2.0 II Cylinder diameter: 30 inches (76 cm) Needle gauge: E10 to E28 Number of feeding systems: 62 with a 30-inch cylinder Maximum speed: Up to 35 revolutions per minute at 30 inches Speed factor (SF): 1050 Cam tracks: 4 tracks – 2 in the dial and 2 in the cylinder Production capabilities: Interlock, 8-lock, piqué, rib fabrics and other double jersey structures Additional features: Option for Lycra integration and rapid switching between different fabric structures. Dujdpewt Rxdjfx Aixou Remarks on machine number 41254 Although there is no specific data available for machine number 41254, the above specifications can serve as a guideline for this machine's capabilities. Complete with accessories. Additional information. Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values indicate the external dimensions of the machine. Capacity (cylinder diameter): 762 mm Number of needles: 1680 units Needle diameter: 1.41 mm Number of yarn spool holders: 62 units

Condition: used, functionality: unexamined, machine/vehicle number: 33509, working width: 300 mm, Complete with accessories Possible technical specifications (based on comparable models) • Type: Single jersey circular knitting machine • Diameter: 15″ to 36″ • Gauge: E20 to E28 • Number of feeders: 120 at 30″ • Speed: Up to 50 revolutions per minute at 30″ • Speed factor (SF): 1500 • Structures: Suitable among others for two-thread fleece and piqué • Applications: Sports and leisurewear, underwear, nightwear and outerwear • Special features: • 50% less friction thanks to ‘relative technology’ • Lower energy consumption • Mayer Cleaning System (MCS) for reduced oil consumption and longer needle life • Automated knit-on aid for efficient restart after yarn breakage Additional information: Length (machine): 2 400 mm Width (machine): 2 400 mm Height (machine): 2 550 mm These values indicate the external dimensions of the machine. Capacity (cylinder diameter): 660 mm Number of needles: 1,944 units Needle diameter: 1.06 mm Number of yarn cone holders: 83 units Duedpfowt Rahox Aixou

Condition: used, functionality: unexamined, machine/vehicle number: 109317625, working width: 762 mm, Main Technical Specifications Needle Gauge: 20 needles per inch Cylinder Diameter: 26 inches (66 cm) Number of Feeding Systems: 38 feeds Needle Selection: Electronic selection per needle via piezoceramic actuators with 8 levels Production Capabilities: Terry fabric with single or double loop height, jacquard patterns, and flat jersey Camtracks: Up to 4 camtracks for various knitting structures Speed: Maximum 150 revolutions per minute, depending on the type of knit Control System: Integrated "ORITEC" electronic control system with USB and Ethernet connectivity. Complete with accessories. Applications This machine is ideal for the production of: Wotol Terry fabrics with large patterns Single or multi-color jacquard fabrics Knitted fabrics with relief effects Djdpfowt Rk Hox Aixjuu Areas with low and high loops within the same pattern. Complete with accessories.

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 9375, working width: 3,000 mm, Possible technical specifications (based on comparable models) Duodpfx Aowt Rcpeixsu Needle configuration: 2-needle, suitable for hemming with pleats. Cylinder arm: For efficient processing of round garment parts such as sleeves and waistbands. Speed: Depending on the specific model and application; comparable machines reach speeds of up to 6,500 stitches per minute. Options: Automatic thread trimmer. Dust extraction system. Label feeder system. Side seam turning system for automatic turning of side seams. Applications Hemming T-shirts, polo shirts, sweatshirts, and sportswear. Processing of waistband and sleeve hems with high productivity and consistent quality. Ideal for production environments where speed and consistency are essential. Lot is located in a crate. Year of manufacture not readable. Crate dimensions: Length 305 cm Width 155 cm Height 152 cm

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works. Dedow Tm Tiopfx Aixouu

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: Dusdeyxnl Sspfx Aixeu - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Condition: good (used), Roaches 3 bath laboratory glass tinting machine Roaches 3 Bath Lab staining machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm Dusdpfx Aiouzhudsxou Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B; Dsdpfx Aisu Nyuloxeuu You are purchasing an industrial sewing machine from Brother. Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B, DB2-B737-413 380V Find more items in our shop!

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD 6 kg Find more textile machines - new and used - in our shop! International shipping costs on request! Duedpfx Aijpitkgexju

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Djdju Nyu Sopfx Aixjuu Find more items in our shop!

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Dusdoyt N Dqjpfx Aixju

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Dodpfx Aiey Nd Ukexeuu Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Pneumatics required Condition Used industrial condition From professional production environment Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Buyer responsible for dismantling and transport