Used washers for sale (90)

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. Cedpfe Ah Hl Usx Abrehd The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Accessories: 240 liters of liquid cleaner + 30 liters of rust protection.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, compressed air connection: 6 bar, input current: 204 A, heating capacity: 90 kW (122.37 HP), power: 50 kW (67.98 HP), load capacity: 750 kg, Equipment: documentation/manual, We offer a cleaning and degreasing system, type VAIOCS S G, as a front-loading system (used system from 2002 – completely overhauled* + new cleaning chamber) for batch sizes with a maximum diameter of 1,500 mm and a maximum height of 600 mm, for use with modified alcohol (A III) or hydrocarbons (A III). * Vacuum pump new – all media-carrying pumps new – remaining pumps overhauled – Control cabinet, S7-300 control system, graphic display MP377 and safety technology upgraded to the latest standard – Pneumatics (Festo) serviced and partially new – pneumatic installation completely new – Electrical installation partially new – valve seals new – container insulation new – Refrigeration unit overhauled – Cleaning chamber, basket holder, swivel mechanism and door completely new Manufacturer: EMO Type: VAIOCS SG Order number: 515215 Year of manufacture: 2001 / 2016 Operating voltage: 400 V/N/PE Chodpfx As Ahx Dtebrsd Control voltage: 24 V DC Connected load: 140.0 kW Heating power: 90.0 kW Motor power: 50.0 kW Rated current: 204 A Solvent: Nikutex 2307 Filling volume: 5000 l If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2005, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Codps Aardpsfx Abrshd ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2015, heating capacity: 54 kW (73.42 HP), power: 78 kW (106.05 HP), Chamber-type washing system Manufacturer: SUGINO ZIPPEL Type: ZD-4.000-RAST Year of manufacture: 2015 Technical data: - Dimensions (length/width/height): approx. 4020 x 2460 x 2600 mm - Total power: 78 kW - Filling capacity: 1,200 l - Load capacity: max. 0.5 - Bath temperature: 65 °C - Heating capacity: 54 kW Cleaning tank: - Volume: 600 l - Pump: 3 bar - Heating: 9 x 3 kW - Dosing pump: 10 bar Rinsing tank: - Volume: 600 l Csdpfx Abozq Hlxsrohd - Pump: 2 bar - Heating: 3 x 9 kW - Cascade pump: 0.28 bar Drying: Blower: 2 x 5.5 kW Vapor extraction: 16 kW Machine designation: Chamber-type washing system Pump: 2 bar Vapor extraction: 16 kW Volume: 600 l In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: Chodpferr Smlsx Abred - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: good (used), SCM IFB02 Bootwash Stainless, single station, rotary boot wash Chsdpfjqqhvpox Abrsd

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing machine of the "Waschfix" type. This system is ideally suited for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and intuitive control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Technical data: Manufacturer: Bous Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blow-off function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a sturdy floor collection tray with skids (ideal for easy transport with a pallet truck or forklift). Scope of delivery: Main washing cabinet, control unit, separate pump and filter unit made of stainless steel, collection tray. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Chodpjz Rm U Sefx Abrod More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Chjdpfx Asz Atinobred

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, DÜRR Universal 71W Used, in good condition Washing grid included Price negotiable Cedps Ag Tl Iefx Abrshd

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz Cedpfx Absxwm Dbsrjhd # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Condition: used, Bous Waschfix Industrial Cleaning and Degreasing System This system is ideally suited for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based detergents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless emptying of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of manufacture: 2006 Tank capacity: 100 liters Chjdpfjz Nwbmjx Abrjd Operating temperature: up to +70 °C Electrical heating power: 6 kW Compressed air connection: 6 bar (for blow-out function) Electrical connection: 230 / 400 V Total power consumption: 17 A Control voltage: 24 V DC / 50 Hz Net system weight: approx. 500 kg "Everything from a single source: We will gladly offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs upon request!

Condition: used, Ceever Spraymaster Turning Spray Washing System The Spraymaster series of industrial washing systems offers advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table, which enables uniform wetting of the components with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No.: Z 429 Load: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items – new and used – can be found in our shop! International shipping costs available upon request! Chedpfx Abex Ex Nzsrjd

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Cjdpoxgcx Tefx Abrohd Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm Chjdpfxjg Ipp Ae Abrsd The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: documentation/manual, - 4 ultrasonic tanks with floor sound and heating - 2 rinsing tanks with heating - Surface separator - Tank/circulation filtration per tank - Additional tank with external heating - DI water connection with carbon cartridge - 1 vacuum dryer (with reserve pump) - Transport system for automatic transfer of the product carriers Cjdpjvu Acfjfx Abrehd - 12 product carriers for holding individual transport baskets - Mitsubishi PLC control

Condition: used, functionality: fully functional, total length: 1,200 mm, total width: 750 mm, total height: 30,250 mm, overall weight: 670 kg, input voltage: 400 V, pressure: 140 bar, electrical fuse: 16 A, temperature: 60 °C, operating pressure: 130 bar, empty load weight: 560 kg, Good day. For sale is an Ehrle Smartwash station. Csdpfozzdxdex Abrshd It is in used condition. It is functional. We would be happy to provide you with further information.

Condition: used, Year of construction: 2009, machine/vehicle number: SCIAC45, Used Rinsing Machine Kompass SK481 8000 bph Used Rinsing Machine Kompass SK481 8000 bphGeneral Features of the Used Rinsing Machine Kompass SK481 8000 bph The Used Rinsing Machine Kompass SK481 8000 bph rinses bottles with a diameter of 45 mm and delivers a nominal output of 8000 bottles per hour. Kompass manufactured this machine in 2009 to serve medium-speed bottling lines. In particular, the SK 481 model offers a compact, efficient solution for plants that prioritize line compatibility and consistent performance. As a result, it suits both new installations and retrofitting projects.This unit is configured to work specifically with 0.1275-liter PET bottles, making it ideal for producers handling small-format plastic containers. Operation and Mechanical Configuration of this used rinsing machine This rinsing unit rotates counterclockwise, while bottles enter from right to left. Therefore, the machine aligns easily with conventional conveyor systems. Moreover, the mechanical assembly includes 32 grippers that firmly secure each bottle during the rinsing phase. The Used Rinsing Machine Kompass SK481 8000 bph performs a single rinsing treatment using fixed nozzles and water as the washing medium. Consequently, it ensures minimal complexity in maintenance and operation. Chjdpfxjyhbwrj Abrjd Processable Products and Application Versatility The Used Rinsing Machine Kompass SK481 8000 bph handles various products, including alcoholic beverages, juices, syrups, oils, soft drinks, spirits, wine, and water. Thanks to this broad compatibility, the machine supports production lines that frequently change product types. In addition, operators can use it across multiple beverage categories without major mechanical adjustments. Furthermore, the consistent treatment method ensures uniform results regardless of the processed liquid.Its adaptation to 0.1275 L PET bottles ensures compatibility with compact beverage formats, commonly used in specific product lines or promotional packaging. Electrical and Dimensional Specifications of this used rinsing machine The machine operates at 415 Volts, with a frequency of 50 Hz, and consumes 3.0 kW of electrical power. These parameters match industry-standard infrastructure. Additionally, the machine’s footprint — 1850 mm long, 2250 mm wide, and 2100 mm high — fits comfortably within most medium-sized bottling halls. Therefore, engineers can plan the layout with minimal disruption. Likewise, these dimensions support integration with adjacent modules in the line. Automation and Control System

Condition: used, Year of construction: 2004, Technical details: Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h No. of washing chambers: 1 No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Chedszu St Nspfx Abrsd Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m

Condition: used, Year of construction: 2011, operating hours: 21,763 h, functionality: fully functional, total length: 7,200 mm, total width: 2,950 mm, total height: 3,000 mm, overall weight: 12,400 kg, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 175 A, power: 105 kW (142.76 HP), A Pero V4 parts cleaning system is available. Basket dimensions X/Y/Z: 1250mm/850mm/500mm Control system: Siemens S7 Basket feeding: automatic, Chedpfx Abeu Ecflerod Operating hours: 21763h, batch counter: 54211. Ultrasound included. Documentation available. On-site inspection is possible. Available from November 2024. Spare parts package included

Condition: like new (used), Year of construction: 2025, functionality: fully functional, (Please tell us your offer price) Chodpfxoz Ebwpo Abrod Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, Electrolux professional dryers, 2 models, UNUSED. - 2x Electrolux TD6-16, dimensions = 720x1210x1700 mm, 400V, 60 Hz, 14.3 Kw, PRICE = €3750 Cedszg D Uiopfx Abrehd The Electrolux TD6-17S is an industrial stack dryer with two drums and a total capacity of 2 x 17 kg. This double dryer is designed for maximum efficiency, fast drying times, and low energy consumption, making it ideal for professional laundries and self-service laundromats.

Condition: used, Year of construction: 2001, machine/vehicle number: LA15, Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame and claddingGuards: Polycarbonate guard doorsElectrical supply: 400 V, 50 HzInstalled power: 20 kWApprox. mass: 2400 kgDocumentation: Complete electrical documentationAdvanced Automation & Control SystemsAutomation is anchored by a Danfoss variable-frequency drive for smooth speed control and Siemens control components for dependable governance of washing and drying sequences. The machine supports manual and automatic operating modes, allowing quick adaptation from setup and maintenance to full automatic production. Electrical specifications include 400 V, 50 Hz with a 20 kW installed load, making it straightforward to integrate into standard industrial power networks. Protective guarding enhances operator safety and visibility during operation.Production Line Integration CapabilitiesThe WDT 10 integrates easily into upstream and downstream bottling equipment thanks to its worm-screw infeed and star-wheel transfer, ensuring consistent bottle spacing and orientation. It is designed for bottle handling in beverage production, whether operating as a standalone module or inline with fillers, cappers, labelers, and packaging machinery. This flexibility supports a range of industrial packaging layouts for PET and glass bottles.Machine Condition & Maintenance HistoryThis second hand external bottle washer-dryer is presented in working condition with complete electrical documentation, facilitating commissioning, service, and spare-parts management. The robust stainless steel construction and established component brands contribute to long-term reliability and maintainability for beverage production environments.Operational Performance & VersatilityThe dual-action cleaning approach—brush scrubbing combined with targeted water jets—ensures thorough external cleaning of cylindrical containers, including difficult areas around the bottom and closure. The drying tunnel uses seven blower motors and air blades to deliver effective surface drying prior to labeling, coding, or secondary pac... Codpe Ady Azsfx Abrehd

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Chsdpfx Absgq N Ezsrod JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: excellent (used), Year of construction: 2015, Gyson Orbit 600, electrically heated and rotary washing machine, in very good condition Chodpfxjvlplho Abrod new price 73,500 pounds / 88,200 euros year of manufacture 2015

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer Chsdpfx Absxw Tg Nerod # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.