Year of construction: 2016, operating hours: 7,790 h, condition: excellent (used), Doppstadt SM720 SA Profi rotary screening machine - Year of manufacture: 2016 - Operating hours: 7790 - Drum dimensions: 7100x2000 - Particle size: 8mm x 8mm - Side conveyor belt: 5m - Rear conveyor belt: 5m - Additional hydraulics - Remote control - Other screening drums available Machine is available immediately. Djdpfx Aie Ah Ug Eozjwd

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is reduced to particles in 6 rows of small chambers, particle by particle, while simultaneously the particles are propelled against the grinding surface. The combination of these two effects results in a very fine grain size, and it is possible to dry the material during the shredding process. Keywords: turbo mill, impact mill, eddy current mill. Depending on the material, the machine can reduce the particle size to between 1000 µm and 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Djdpjzl Shzofx Aizjwd The possible applications range from minerals, industrial products, powder coatings, chemicals, and dyes to food and feed products. The innovations of the machine are: • the plug-in connections of the wear tools (always in the same position with minimal tolerances) • rotation in both directions – this ensures that the tools wear evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: rotor and stator made of hard metal, available in different degrees of hardness; ceramic is also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control cabinet is not included.

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve Dodpfx Asz Nkt Nsizowd These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires. Dsdoz Rmt Uspfx Aizswd

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Djdpfx Aezl E N Eoizowd Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,700 h, functionality: fully functional, A pre-shredder in perfect condition is for sale. The machine can be inspected at any time. Dsdpfe Aia Svsx Aizswd

Condition: used, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Year of manufacture: 2017 Colour: Grey Empty weight: 2.500 kg Djds Ab An Ijpfx Aizswd - Details: - └ Description: Excluding magnet - Year: 2017 - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, operating hours: 947 h, functionality: fully functional, empty load weight: 6,118 kg, fuel type: diesel, lifting height: 14,020 mm, drive type: Diesel, construction width: 2,320 mm, Articulated boom lift Technical condition: very good Front tire size: 937 x 298 Dedpfx Ajz Dlpyeizewd Front tire condition: 80 - 100% Rear tire size: 937 x 298 Battery condition: 80 - 100% CE certificate Image serves as an example and symbolic representation. Tire model: 937 x 298 mm Load capacity of the work platform: 408 kg

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Dedj Aifh Djpfx Aizowd Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Dwede Aid Syjpfx Aizsd Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2012, operating hours: 33,400 h, functionality: fully functional, control cabinet height: 2,300 mm, number of blades: 28, year of last overhaul: 2025, overall weight: 33,000 kg, type of input current: AC, Lindner Jupiter 2200 – Year of manufacture 2012 – 264 kW – Pre-shredder For sale is a powerful and regularly maintained Lindner Jupiter 2200, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial pre-shredder for processing various commercial waste and recyclable material fractions and was permanently integrated into our stationary production line. Technical data Manufacturer: Lindner Recyclingtech Model: Jupiter 2200 Year of manufacture: 2012 Machine number: 1744 Machine weight: approx. 33,000 kg Drive power: 2 × 132 kW (264 kW total) Rotor speed: 51 rpm at 50 Hz Operating voltage: 400 V / 50 Hz Number of knives: 28 pieces Knife dimensions: 116 × 116 × 37 mm Screen opening: Sickles 79 mm Frequency converter: ABB ACS-800 Hydraulic unit: Bosch Rexroth Hydraulic drive: 11 kW Hydraulic oil tank: 400 liters Equipment and special features The Jupiter 2200 features a frequency-controlled drive and a hydraulic feed unit for controlled material feed. The robust design and powerful cutting unit enable use in industrial recycling and processing plants. Dedpfxj Ahnlbe Aizjwd Maintenance and servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists for the Jupiter 2200 with the manufacturer Lindner Recyclingtech. In addition to the regular maintenance, extensive maintenance and modernization measures were carried out. Important work carried out: Both couplings completely overhauled. Control computer and display renewed. Rotor completely armored and regularly serviced. Air conditioning unit renewed. Both frequency converters (FC) overhauled. Complete new set of sickles installed. The corresponding maintenance and service records are available and can be viewed upon request. Protected housing of the control cabinets The associated control cabinets are located in a separate control room and are therefore protected from dust and dirt from the production environment. Sale due to plant modernization The machine is being offered for sale as part of the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Dismantling and loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your inquiry.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h Dwsdpfxo Aid Sks Aizjd 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 523570, total width: 2,000 mm, total length: 3,500 mm, total height: 800 mm, protection type (IP code): IP42, overall weight: 4,830 kg, input voltage: 151 V, STEINERT Overband Magnet DMS 4 Z 130 180/151 S – 4,830 kg – Year of Manufacture 1995 Dwedpfx Ais Afubnszed For sale is a used STEINERT overband magnet for the magnetic separation of ferrous metals from bulk materials and material flows. The overband magnet from the renowned manufacturer STEINERT is particularly suitable for use in recycling and processing plants, construction waste processing, and in the scrap and waste management industries. It offers an interesting option for supplementing existing conveying and sorting systems. - Duty cycle: 100% - Weight: approx. 4,830 kg The overband magnet is offered as a used item. Information on complete functionality cannot be conclusively confirmed at this time. An inspection is possible after prior arrangement. If you are interested or have any questions, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, total width: 2,800 mm, total height: 3,000 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,600 kg, empty load weight: 3,600 kg, Equipment: documentation/manual, BERGMANN Roller Compactor, Roll Packer JRP 7700 - Wood and Pallet Compactor Dedpez S N Svsfx Aizswd Description For sale is a robust BERGMANN Jumbo Roll Packer for shredding and compacting wood pallets and bulky wood waste, paper, and waste in open containers. The machine comes from an industrial group and was only used sporadically there. The heavy, profiled compaction roller breaks up the fed material and compacts it directly in the container. This allows for better utilization of the available container volume and reduces the number of required collections. Ideal for industrial and commercial companies, logistics companies, wood processing companies, and waste disposal companies. Condition Good, ready-to-use, and fully functional condition with typical signs of wear. Only sporadic use by the previous operator. Technical Data and Equipment Manufacturer: BERGMANN Designation: Jumbo Roll Packer Type according to operating manual: JRP 7700-42 Design: Stationary container compactor Drive: Electro-hydraulic Compaction: Profiled steel roller on the articulated arm Previous use: Wood pallets and wood waste Equipment: Hydraulic unit, control unit, and protective grating Available Documents • Documentation and operating manual • Spare parts list • Electrical wiring diagrams • Hydraulic diagrams Price: €14,900 net, negotiable, plus statutory VAT. Transport/shipping costs, collection. Freight transport by separate agreement; transport costs are not included in the purchase price.

Year of construction: 2020, operating hours: 2 h, condition: good (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Dodpfx Aiozhifiozewd Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Dwedps Aifcbefx Aizjd Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided and any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2008, operating hours: 2,445 h, 2008 | Schliesing 460 MX | Used Shredder | 2445 hours Dwedpo Ad I I Eofx Aized 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 10200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41527 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Dwodpfs Aifhnjx Aized Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Djdpfx Ae Aifiasizewd Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, overall weight: 10,000 kg, loading space length: 1,300 mm, loading space width: 1,000 mm, total height: 3,400 mm, total length: 3,500 mm, total width: 2,000 mm, power: 90 kW (122.37 HP), input voltage: 380 V, rotary shear 2 shafts - 2 motors 45kw - inversion in case of jam - shredding chamber 1300 x 1000 - thickness of new knives 55 - 4 tons - large loading hopper - possibility of loading very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer. Djds Ahrp Rspfx Aizowd

Condition: good (used), Year of construction: 2021, operating hours: 7,000 h, functionality: fully functional, overall weight: 46,000 kg, rotational speed (max.): 32 rpm, rotational speed (min.): 18 rpm, power: 566.33 kW (769.99 HP), Equipment: rotational speed infinitely variable, Lindner Urraco 95 DK – Year of manufacture 2021 – Well-maintained condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,000 operating hours. The shredder is in a well-maintained and operational condition. The exact condition can be seen in the pictures. The machine is equipped with the DK4 package and therefore has a reinforced gearbox and a reinforced shredder frame. ⸻ Equipment / Scope of supply Dwjdpfx Aio Afl Niozsd Optionally available at an extra charge: * Individual rotor configurations for different materials, e.g. waste wood (A1–A4), household and commercial waste, roots, aluminum, and scrap. * Belt magnet for separating ferrous metals. * Rubber track system to protect the ground when used on sensitive surfaces such as asphalt and concrete. All of the mentioned equipment options are optional and can be purchased additionally at an extra charge, depending on your needs. They are not included in the basic price. DK4 package with reinforced gearbox and reinforced shredder frame. ⸻ Technical data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,000 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on the model) Rotor length: approx. 2,500 mm Rotor diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Track-type, hydraulically driven Application areas: Scrap, commercial waste, bulky waste, mixed waste, wood, recyclable materials ⸻ Condition: Well-maintained machine Fully functional technically Sale is made as inspected on site Additional information / Maintenance history The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work has therefore been carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, incompleteness or changes in the information. The sale is made exclusively subject to prior sale.

Condition: good (used), Year of construction: 2018, operating hours: 22,000 h, functionality: limited functionality, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-compression force: 28 t Main compression force: 85 t Feed hopper: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volumetric capacity: 1200 cbm/h Throughput capacity at 30-100 kg/cbm: 13-30 t/h Tying: 5-wire vertical, (3-wire horizontal) Oil tank volume: 2000 L Transport dimensions (press): 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27000 kg Dwodpfx Ae Aifavjizod Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The horizontal tying system is currently not functional. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter replaced Vertical tying system overhauled and made operational. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty. Our payment terms are 100% prepayment.

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Rotor shear UC 140, with hydraulic post-compressor (HNDE), Dods Aibitepfx Aizewd Drive: 2 x 22 kW, control cabinet, cutting head size: 1450 mm x 1000 mm, blade width: 85 mm, Cutting head requires repair.

Condition: excellent (used), Year of construction: 2022, Make: HSM Model: V-Press 1160 max Year of manufacture: 2022 Pressing force: 594 kN Voltage: 400 V Dwsdpfx Aiez Snziezsd Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm x 65 cm

Condition: good (used), functionality: fully functional, Wood chipper for logs and branches Drive via PTO shaft Max. infeed size: 35 x 35 cm Dwedpfx Ao Agyppeizjd 4 blades 2 screens with 20 mm and 30 mm mesh Only 1600 operating hours