Condition: good (used), Year of construction: 2006, VERY POWERFUL GRANULATOR WITH HIGH CAPACITY Technical data: Rotor Length 4 000 mm Rotor Diameter 1 200 mm Power 500 kW Weight approx. 35 tons Hpedpfx Agsx E T A Aowoa The machine is dismantled on stock.

Year of construction: 2006, operating hours: 5,100 h, condition: excellent (used), functionality: fully functional, Used Powerscreen Warrior 1400 Tracked Screening Plant Year 2006 CAT Engine 5100 Hrs Fingers Top Deck & 15mm Slotted Mesh BTM Deck Top Deck Mesh Cassette Available If Required Various New Hydraulic Hoses Just Fitted Various New Conveyor Rollers Feeder Belt & Oversize Conveyor Belt Replaced Hjdsxyq A Hepfx Agwepa New Remote Control Doglead Unit Good, Straight Machine. Ready To Go To Work

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced Hpjdox Dnb Uepfx Agwea • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2021 Hjdpfx Agox E Td Hswspa Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cartons The baler is in very good condition. The operating manual is included. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information given or for any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, - Details: - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 Hedpfx Asx Dik Rjgwopa - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length approx. 2 meter - width of the knives 70 mm - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap. Hsdpfx Agex E Tz Sswopa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 14,000 mm, total width: 1,200 mm, Used Stadler Conveyor Year 2014 14 Metres x 1.2M Flat Conveyor Belt (Ref: 1105) Complete With 4.0kW Electric Motor / Gearbox Hpjdpfxjxyqupj Agwea Very Good Working Condition Heavy Duty. Made In Germany Large Selection Of Stadler Conveyors In Stock

Condition: good (used), Year of construction: 2019, functionality: fully functional, Incoming Baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, carton The operating manual is available. Hpsdex E Tdgjpfx Agwja Please note: All technical data refer to the manufacturer's information. We assume no liability for the information provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2020, GOOD CONDITION Hpedpfx Agox E Tzljwea Shredder type TEREX Ecotec TDS 820, good condition Year of manufacture: 2020 Only 2,700 hours Weight: 27,500 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of Manufacture 2016 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of Manufacture: 2016 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Hpsdpjx E Tcvsfx Agwea Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any potential errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: reconditioned (used), - Screening machine Komptech Maxx - Workshop overhauled - Ready for operation - Approx. 6,850 hours on the clock - Drum screen perforation 25 x 25 mm - Both discharge conveyors equipped with magnetic head roller Drums with different perforations are also available. Immediately available Hodpfx Aex E Tyuogwjpa

Condition: good (used), Year of construction: 2012, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the accuracy of the details provided or for any errors. This offer is subject to change without notice and may be withdrawn or sold at any time. Inspections are available by appointment. Sale is ex works, payment in advance, without warranty or guarantee. Hjdpfx Agex E Tccowspa

Year of construction: 2014, condition: good (used), READY FOR USE Hpedpfx Asx E Tx Rogwoa Komptech NEMUS 2700 in good condition approx. 8,000 h

Condition: used, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Presto CC 40 M Baler Technical Data: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Hpodpexuq E Dsfx Agwsa Throughput at bulk density of: 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. Operating manual and CE declaration are available. Note: Channel discharge is fully automatic and adjustable. Please note: All technical data are as stated by the manufacturer. We accept no liability for the information provided or for any errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: new, warranty duration: 12 months, - Electric Drum Screen Machine - Drum length 7000 mm, diameter 2000 mm Hsdox E Txwepfx Agwepa - Motor 22 kW - with electrical cabinet - with cleaning brushes - screen mesh size and color according to customer´s choice - new machine manufactured in Europe - with manuals and CE - 1 year warranty

Condition: good (used), Year of construction: 2019, functionality: fully functional, Inbound: Vertical Baling Press HSM V-Press 1160 plus, Year of Manufacture 2019 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Stock No.: 9969 Year of manufacture: 2019 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, Cardboard, Film Instruction manual is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the specifications provided or for any potential errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex-location, without warranty or guarantee. Our payment condition is 100% advance payment. Hjdpox E S Anefx Agwjpa

Year of construction: 2011, condition: good (used), READY FOR USE Terra Select T6 screening machine in good condition. Approx. 10,200 operating hours. Hpodpfjx E Txqjx Agwoa

Condition: new, ++++OUR NEW PRODUCTS++++ Hpodpsx E Tvpefx Agwsa NEW OVERBAND-MAGNETS WITH HYDRAULICMOTOR FOR MOBILEMACHINES USEABLE QUALITY PRODUCTS MADE IN EUROPE 500 TO 1500 MM WIDE WE CAN OFFER SUPPORT OPTIONALLY 1 YEAR WARRANTY FAST DELIVERY ATTRACTIVE PRICES ++++ASK FOR OFFERS++++

Condition: used, Year of construction: 2016, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material Hpedpfxjx E Tw Hs Agwsa - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Condition: good (used), covered conveyor length 8.5 m, width 80 cm Hodpfxox E T D Hj Agwspa FOR SALE FOR LOW PRICE.

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units Hodpfx Ajx E T Dyjgwspa - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Rotor Diameter 1 000 mm Hodsx E T Dtspfx Agwspa Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: used, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled new knives new cooling unit Hpjdpfx Aox E Tzxogwsa READY TO GO

Condition: good (used), Komptech Terminator 3400 SE 160 kW full set with electrical cabinet FOR SALE FOR LOW PRICE Hedpfx Agsx E Tzfjwspa

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D Hedpfx Aex E Ty Uegwjpa - year of manufacture 2008 - low hours - good working condition - with wireless remote control and spare parts