Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h Lhodpfx Adsqi Eh Hotsf incl. steel construction, platform, railings, etc.

Condition: good (used), functionality: fully functional, Screen area: approx. 1,300 x 4,000 mm Lhsdpfxetpgvxj Adtjf new semi-mobile steel construction

Condition: excellent (used), functionality: fully functional, feed hopper 5,5 cbm main conveyor Lhodpfjlxyrljx Adtjf electric-hydraulic drive 30 kW double deck screen box 1.220 x 2.440 mm optional: incl. 2 wheelmobile stockpile conveyors each 500 mm x 8 m as stockpilers

Year of construction: 2005, condition: good (used), functionality: fully functional, crusher HARTL PC204N opening: 1.260 x 1.060 mm Lodpfxsnxi Dns Adtjhf rotor-diameter: 1.300 mm new blow bars feed hopper approx. 7 cbm vibrating chute active 2-deck pre-screen side- and main-discharge conveyor overband magnet separator CAT diesel engine C10 (291 kW) weight: approx. 50 t.

Condition: good (used), functionality: fully functional, Screen area: approx. 1,100 x 3,000 mm Upper deck: 40x40mm square mesh screen Lower deck: 4x4mm plastic screens Piping and water spraying on both decks 5.5 kW electric drive Lsdpfxsu Dhigo Adtjhf Semi-mobile steel construction with access on both sides, bypass platform and railing

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Type: KQ 14/38-2.5 Lsdpfxetgpf Ho Adtohf Screening area: 1,400 x 3,800 mm without screen panels including 15 kW electric motor with new semi-mobile steel construction and new discharge chutes

Condition: refurbished (used), functionality: fully functional, power: 37 kW (50.31 HP), Inlet: approx. 1,000 x 700 mm Lodpeu Dhg Ejfx Adtjhf Rotor diameter x width: 600 x 1,000 mm Feed max. 100 mm E-drive semi-mobile on steel skid frame with inlet and outlet box

Condition: like new (used), 2 units of feed and dosing bunkers with rasp discharge, suitable for light and organic materials (e.g. wood chips). Dimensions (L x W x H): approx. 9.1 m x 2.8 m x 2.5 m (with legs approx. 3.8 m). Discharge via 4 shafts each, driven by a 1.1 kW geared motor. Lhjdpfx Adeyv Ef Retof

Condition: used, functionality: fully functional, Screening area: approx. 1,200 x 2,400 mm Lhodpfx Adewm Nfcstsf 5.5 kW electric motor with piping and water spray nozzles Semi-mobile steel structure with bypass platform

Condition: like new (used), functionality: fully functional, power: 5.5 kW (7.48 HP), As-new, unused single-deck screening machine Screening surface: 1,250 x 2,500 mm 5.5 kW electric drive Lodpfxeycq Ams Adtjhf Steel structure and platform

Condition: good (used), functionality: fully functional, Screening area: 1,250 x 3,000 mm new semi-mobile steel structure with platform and discharge chute Lhjdjwwr D Aopfx Adtof with cross conveyor belt 650 mm x 2.2 m

Condition: used, Year of construction: 2024, operating hours: 300 h, Self-propelled compost turner for the treatment of organic waste such as green waste, bio waste or microbiologically contaminated soils. Lhsdpfsizku Eex Adtsf JT630, semi-autonomous - windrow width up to 6.30 m - windrow height up to 2.9 m - radio-controlled with semi-autonomous functions - up to 25% fuel savings - Easy to transport and quickly ready for use

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Lhodpexvh Dyofx Adtef Schneider PLC

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Lhsdpfxeyk Ea Ao Adtjf

Condition: ready for operation (used), functionality: fully functional, power: 12 kW (16.32 HP), Year of construction: 2020, operating hours: 23,531 h, machine/vehicle number: GGI0018899, Equipment: trailer coupling, For sale is a dust suppression system (dust control machine) from the brand Generac. This unit is ideally suited for construction sites in demolition or in the recycling sector when shredding dusty materials such as wood, stone, or others. The system is mounted on a practical trailer chassis, making it highly mobile. Technical specifications: - 15kW blower motor Lodsxankzopfx Adtshf - Maximum range: 50m - Integrated control panel - Phase inverter - Booster pump with peripheral impeller - Flow meter to protect the pump - Pressure gauge for outlet pressure display - Stainless steel crown fitted with nozzles - Water drain system - 2 height-adjustable stabilizers If you have any questions, feel free to contact us. We are currently selling another dust suppression system as well. If you are interested in purchasing both, a package price is possible. The unit comes from our own stock. We are not machinery dealers.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC Ledpjy Ayiqefx Adtohf - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: as good as new (ex-display), +++++ We manufacture the original +++++ Non-binding offer. Compact plant LLK 246. copper cable recycling machine Lhsdpsfb R Ixefx Adtsf Plant for copper cable recycling. -consisting of granulator, conveying blower, separating table, exhaust system. - SPS controlled As new or used plant. -ex our factory AGB on our homepage

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 149, For sale is an Ekochem WG400 water ring pelletizer including a WP200 centrifugal dryer, both in very good condition. This system is suitable for pelletizing plastic melts and is particularly designed for applications involving PE, PP, and PS. However, it is also well-suited for pelletizing other types of plastics. The WG400 water ring pelletizer is designed for reliable, continuous operation and enables the production of consistent plastic pellets. The water ring process ensures a clean and efficient pelletizing process. The system is configured for a throughput of approximately 600 kg/h, but with parameter optimization via the control cabinet, higher capacities can be achieved. Lhjdpfx Aey Av A Tedtsf Technical data for the water ring pelletizer: - Motor: 2.2 kW by Siemens - 4-blade system - Max. blade speed: 3,000 rpm - Heating power: 2.5 kW - Max. temperature: 300°C - Blades are pneumatically pressed against the die plate - All main components are made of stainless steel Centrifugal dryer: - Motor: 4 kW - Motor speed: 1,500 rpm - 400 L water tank, stainless steel - Water pump: 2.2 kW - Filtration: 25-200 μm - Heat exchanger: 2 m² - Filtration volume: 15 L Additionally, we offer a second water ring pelletizer without dryer, priced at €8,000 net. The machine is sold as inspected. Viewing by appointment is possible. Further information, images, and technical details available upon request.

Year of construction: 1988, condition: good (used), Includes discharge screw for transporting the material. Two other smaller grinding mills are also available; if desired, all three can be sold as a package. Ljdpeyzpx Esfx Adtshf

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 Lodpfx Ajy Auawjdtshf • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Lsdpfx Adoy Auadjtshf

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Ljdpfx Asy At U Tedtohf Rotor knives: 9

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Lhsdpfxsy At Uyo Adtsf Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW Lhjdpoy At Tpjfx Adtjf

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Lodoy At Tcjpfx Adtjhf Rotor diameter: 260 mm Rotor width: 900 mm With roll feed