Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational Nedpfxex Dnb Us Ah Uowr • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2021 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Nodpfx Ahjx E Td Ho Uewr Materials: paper, cardboard, cartons The baler is in very good condition. The operating manual is included. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information given or for any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, - Details: Nwsdpfsx Dik Rex Ah Uer - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Nedpfxox Hz Hls Ah Uswr Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality thoroughly tested. FLITS Rental & Sales service: with every machine, we supply a bundle of binding wire (120 wires). Do you need additional bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you can count on speed, transparency, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us to provide comprehensive information and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Nwedpfexrtt Ejx Ah Usr Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: used, Year of construction: 2016, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: Nsdpfx Aex E Tw Heh Uswr - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Nsdpfx Ahox Nkhqs Uowr Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Bale Press Dixi 80 SLD with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Strapping: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, carton Nodpjx E Tdgsfx Ah Ujwr The press is in good condition. The operating manual is available. Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or possible errors. This offer is subject to change and prior sale, and can be withdrawn at any time. Inspections are possible by appointment. The sale is ex works, prepayment required, without warranty or guarantee.

Condition: new, Screen drums for almost all drum screen machines, manufactured with the highest precision! Made in Germany – from layout to production, everything from a single source! Almost any hole pattern can be realised! Manufactured from wear-resistant steel! Short delivery times! Unbeatable prices! Nwodpjw Izl Aofx Ah Usr

Condition: good (used), covered conveyor Nwjdpfx Asx E T D Hsh Usr length 8.5 m, width 80 cm FOR SALE FOR LOW PRICE.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baler Dixi 60 SLD, Year of manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of construction: 2015 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Nwjdpfx Asx E Tcvoh Uor Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data is based on manufacturer information. We accept no liability for the stated details or potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Viewing is possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Nwjdew I Ar Rjpfx Ah Usr Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units Njdpfx Ahex E T Dye Ujwr - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: Njdpfx Aex E Tccsh Uewr All technical data are based on the manufacturer's information. We assume no liability for any errors or the accuracy of the information provided. This offer is subject to change and prior sale; it can be revoked at any time. Inspection by appointment only. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Nedpfx Ahoqx Ur De Uewr Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry!

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Rotor Diameter 1 000 mm Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Nwjdpfox E T Dtjx Ah Usr Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: good (used), Year of construction: 2019, operating hours: 492 h, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2019 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Stock No.: 9969 Year of manufacture: 2019 Operating hours: 492 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Nwedpfex E S Ansx Ah Uer Materials: Paper, cardboard, film The baler is in good condition. Operating manual is available. Please note: All technical data is based on manufacturer's information. We do not accept any liability for the details provided or for possible errors. All offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible upon prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms: 100% advance payment.

Condition: new, Spring = Early Start! Get your screening machine ready for the screening season in good time! Heavy-duty wheels for your screening machine *Made in Germany* - So your screening drum runs smoothly!!! Ask about our spring prices! Screening drums made of high-strength S355JR steel for almost all brands! - Screen plate pitches can be configured upon customer request! - Flexible number of spirals for optimal screening performance! - Narrow bars for maximum screening area! - Various hole patterns available! - All hole widths and plate thicknesses from 6-10 mm available! Ask about our spring prices! Don't have a screening machine yet? We can help with that too! Please contact us! We'd be happy to advise you. Nwjdpfxsv Iyfde Ah Ujr

Condition: used, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet Nwsdpfxjx E Tzxs Ah Usr fully overhauled new knives new cooling unit READY TO GO

Year of construction: 2024, condition: like new (used), For sale due to process change: Compact, semi-stationary, electrically driven drum screening machine for screening excavated material, soil, stones, construction debris, or other screenable material! Type: GREMAC eZero Nwsdpfxev Iyx Rj Ah Uer Year of manufacture: 2024 Location: North Rhine-Westphalia Operating hours: approx. 200 hours Available from: Short-term, upon request Drive: Electric motors, alternatively by generator (gasoline/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 2,000 mm Drum diameter: 1,000 mm Screening area: 6.2 m² Bunker: 1.3 m³ Weight: 1,500 kg Mesh size: 20 mm² Screening technology Made in Germany. The GREMAC eZero impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long service life. Machine Condition: - As new - Very well maintained The machine is sold in its original condition at the time of delivery. The seller assumes no liability for defects. Subject to prior sale and technical changes. All information is subject to change without notice.

Condition: good (used), Komptech Terminator 3400 SE 160 kW Nedpox E Tzfefx Ah Uewr full set with electrical cabinet FOR SALE FOR LOW PRICE

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D - year of manufacture 2008 - low hours Nwodpfx Ahex E Ty Us Ujr - good working condition - with wireless remote control and spare parts

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm Njdsx E Ty Ispfx Ah Uowr

Year of construction: 2025, condition: new, WE DELIVER TROMMEL SCREENS FOR ALL KOMPTECH MODELS: - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS - OTHERS SHORT DELIVERY TIME Nedpfjx E Tynjx Ah Uewr ASK FOR OFFERS NOW

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW - with electrical cabinet - with cleaning brushes - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE - 1 year warranty READY FOR SALE Nwjdpfxex E Tyhs Ah Uor