Used Waterjet cutting machines for sale (50)

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, The machine is operational and working. To make accurate cuts, however, a service must be carried out. The machine can be inspected under process conditions. A high pressure pump which has been serviced regularly is included. We sell as is where is Thank you Cslq Riettaywjv Negt

Condition: ready for operation (used), Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible. Cgelq Rijriwd Esv Nst

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 3,700 h, Functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, workpiece weight (max.): 5,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,100 mm, tank capacity: 8,000 l, pressure: 4,200 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, table height: 1,100 mm, operating pressure: 4,000 bar, warranty duration: 6 months, input current: 60 A, year of last overhaul: 2024, water pressure: 4 bar, compressed air connection: 7 bar, pump pressure: 4,200 bar, overall weight: 5,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), 3D waterjet cutting machine used by stone customer. Completely reconditioned in 2024 / 2025 ( still in progress ) by official CMS dealer. Pictures are before / during the overhaul, machine condition when delivered is like new ( last picture is an example of how we supply reconditioned machines ) Cutting head full 3D with 150 mm Z-axis range. Rotating axis range +/-274 degrees. Tilting axis +/- 62 degrees Fully 3D operated with intelligent Kerf Compensation ( IKC ) , no 2,5D head like most competitors We have been official CMS dealer since 13 years in the Benelux Rental / Lease / all in lease possible depending from geographical area. Cjlq Rsvdnn Ejiv Nogt Electronic sand doseage with vacuum control 60HP Jetpower Evo pump with 3 cilinders, bringing 5 L/min at maximum 4200 bar ( L/min determine cutting speed, not the pressure ) The machine will be delivered fully reconditioned with official warranty. Off course with 100% technical performance. Installation and training possible.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,351 h, Functionality: fully functional, We are selling our TCI plasma water jet system with the following data: Type: BP-C 4020 Combi Plasma source: HPR130XD, 130 Ampere Water pump: KMT, 4000 bar Table dimensions: 4,000x2,000mm Commissioning: 05/2018 Working hours: 6,351 With many extras such as water cleaning, water level control and much more. Cgslstu T Udsq Riv Njt The machine is still fully operational and is still used occasionally. A viewing is possible at any time during our business hours.

Condition: good (used), Year of construction: 2018, operating hours: 1,890 h, Functionality: fully functional, Equipment: safety light barrier, CMS waterjet cutting machine Technocut e syline , year of manufacture 2018, processing area 2000 x 2000 mm Electric high-pressure intensifier pump CMS Green Jet EVO 4150 bar. 1 x IGEMS software license, 1 x dongle, chain conveyor system for "maintenance-free" abrasive discharge, abrasive container with device 1.0 to, Losma belt and cartridge filter for waste water treatment. Cooling unit, remote control, electronic dosing unit for automatic control of the abrasive supply, drilling unit for drilling delaminating materials. Errors in technical data and prices excepted. Celq Rjt Sxpxeiv Negt Subject to prior sale. Our general terms and conditions apply, which you can view on our website.

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Cjlq Risnab Rlov Njgt Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, operating hours: 16,450 h, Functionality: fully functional, machine/vehicle number: 11250, pump pressure: 4 bar, power: 19 kW (25.83 HP), High pressure pump DYNATRONIC 402S Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006 Operating hours: 16.450 h Used, fully serviced, tested and ready for operation, Maximator JET certificate  Drive power main engine 19 kW  Auxiliary unit oil/air cooler 1.1 kW  Additional unit pre-pressure pump 0.46 kW  Delivery rate 1.9 l/min  Design pressure 420 MPa  Operating pressure, max. 400 MPa  Continuous operating pressure 380 MPa  Pulsation damper 2.5 l  Oil tank volume 120 l  Ambient temperature oil/air cooler 10-35 °C  Width x depth x height 1,900 x 970 x 1,520 mm  Weight 1,250 kg  Sound level max. 78 dB(A)  Pressure-, volume flow-controlled drive hydraulics  Oil-air heat exchanger  Pulsation damper  Primary and secondary filter units  Stepless pressure adjustment from 50 to 400 MPa  Plain text display with event list  Pressure relief valve  Water pre-pressure pump  Operating pressure setpoint display  Soundproof housing Price ex Schweinfurt plus VAT 16.500,- € Cslqjrcb Ede Riv Nsgt plus - transportation - Training 1 day for up to 4 people in Schweinfurt, optionally at the customer's premises - Installation and assembly Subject to changes and errors in technical data and prices. Subject to prior sale.

Condition: used, Year of construction: 2011, operating hours: 6,895 h, Functionality: fully functional, We are selling our Flow waterjet cutting system Cutting area: 4x2m Pump: 6000bar 2 cutting heads (1 disconnected) lots of accessories (value approx. 20.000€) 2 cutting heads etc. This was put into operation by Flow in March. The major pump maintenance was carried out at the end of March (just under €40,000) and it has run for approx. 300 hours since then. Flow came back in August and replaced various seals and valves on the pump. All operation reports are available. Control system for automatic sand supply new New air conditioning units in control cabinet incl. software Please contact us for further information. Celq Rieuquxmov Negt Sold due to new acquisition. Crane + forklift available for loading.

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, Functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use Celqjq U Irme Riv Negt We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: ready for operation (used), Year of construction: 2014, operating hours: 400 h, This Waterjet cutting machine was manufactured by WATERJET CORPORATION S.r.l. in the year 2014 in Italy and has 400 working hours. It is equipped with a 4000x2000 working table, a KMT pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand. It is compatible with DXF, DWG, etc. The machine is in very good conditions, it can be tested, is under power. Suitable for cutting and engraving carbon steel, stainless steel, stone, ceramic, plastic and other neferous materials. Cjlqsvz Dxns Riv Njgt

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.1 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,000 mm, table width: 2,000 mm, positioning speed: 40,000 m/min, operating pressure: 4,130 bar, input current: 15 A, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 250 mm, total height: 3,700 mm, total length: 6,300 mm, total width: 2,550 mm, pump pressure: 4,130 bar, overall weight: 5,800 kg, material thickness: 170 mm, power: 6 kW (8.16 HP), CMS Tecnocut Hydro-abrasive waterjet cutting machine The IDRA hydro-abrasive jet cutting system has been designed and built to cut metal and non-metal materials (such as marble, glass, synthetics) up to 250 mm thick without causing thermal damage to edges, toxic fumes and dust. The machine consists of : 1) A cutting table with 3 controlled axes 4000x2000 mm - Tool diameter corrector (settable). - High block execution speed. Cgelqsv Hqnms Riv Not - Automatic vector speed control on profile. - Parametric deceleration on angular points - Connection with external parametrics via RS 232 serial port - Movement is on high-precision hardened and ground racks (classH5), driven by brushless electric motors and hardened and ground case-hardened pinion. 2) A 60 HP - 45KW high-pressure intensifier The 60 hp pressure intensifier (3 pistons) with hydraulic power pack, have been designed and built to multiply the water pressure, necessary for cutting materials, to a maximum of over 4000 bar 3) A pressurised abrasive transport system The abrasive feeder allows a controlled and uniform dosing of the abrasive flow rate. It consists of two devices: a propeller, where the abrasive is fed in, and a small lung on the cutting head where the abrasive is dosed. Compressed air pushes the abrasive from the pressurised container into the hopper on the cutting head. 4) Dredger for the automatic evacuation of the abrasive, amply dimensioned, with a centrally supported scraper chain for complete cleaning of the spent jet collection tank, with built-in sedimenter. Automatic and semi-automatic timer. 5) Predisposition for rotary axis for pipe cutting. CE certified machine

Condition: refurbished (used), Year of construction: 1999, - two cutting heads Cjlq Rjnab Sieiv Nogt - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: good (used), Year of construction: 2017, Waterjet DX 510 / waterjet cutting machine / 5 axes, Year of construction 2017, CNC control, Travel X/Y/Z 3350/1600/180 mm, Working range A axis +/- 69°, Travel C axis rotary axis 360° unlimited, Laser safety barrier, automatic desludging system, Celq Rjq Efwvoiv Njgt underwater cutting system, Full 3D software, High-pressure transmission pump 4130 bar, air/oil cooler, Accessories,

Condition: used, Year of construction: 2015, operating hours: 5,175 h, Functionality: fully functional, BFT high pressure pump Ecotron. Only about 5200 hours. Good condition. Fully functional, currently still in use. Cgolq Risvwb D Tev Not

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,516 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 250 mm, pressure: 3,800 bar, Water cutting system has been inspected annually by the manufacturer Bystronic and has been running in 1-shift operation. TECHNICAL DETAILS Control system: Bystronic BySoft Working pressure: 3800 bar Pump: Bypump 52 kW Cutting speed: 50 m/min Number of cutting heads: 2 Working area: 6,000 x 3,000 x 250 mm Workpiece weight: max. 790 kg/m² Workpiece thickness: max. 200 mm Positioning speed X/Y: 60 m/min Simultaneous positioning speed: 84 m/min Positioning accuracy: ± 0.05 mm/min Repeat accuracy: ± 0.025 mm/min Operating hours: 16,991 h Cutting hours: 14,516 h EQUIPMENT Cslet Eblpsq Riv Njgt - Light barrier concept, which ensures free access from 3 sides. - Cutting carriage with 2 x 2D heads (min. distance 225 mm) - Automatic sludge removal - Automatic level control of the water level - 1000 kg abrasive storage tank

Year of construction: 2023, Condition: new, The waterjet cutting system from the latest OMAX high-end series in bridge design represents what is technologically feasible in combination with reliability, durability and maximum load capacity. Low-noise and low-emission operation in conjunction with extremely simple PC-supported operation for precision at the push of a button predestine this series for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7. - closed measuring system - digital drives - brushless servo motors - precision linear guides surface-hardened - portal (bridge) driven on both sides - maintenance-free IntelliTRAX drive - energy-efficient EnduroMAX ultra-high pressure pump - practical water level control as standard equipment - ergonomic control panel on rollers - IntelliMAX Premium control software - high-precision 5-axis kinematics TiltaJET Cgjlsmzbv Deq Riv Nst High-end solution for the most accurate abrasive waterjet cutting in the industry. Price on request

Condition: excellent (used), Year of construction: 2021, PROLINE 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Cgslq Rjgb Rkljiv Nst Z-Axis: 200 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser

Condition: good (used), Year of construction: 2004, table length: 3,000 mm, table width: 4,500 mm, operating pressure: 3,800 bar, warranty duration: 12 months, total length: 4,500 mm, total width: 3,000 mm, water pressure: 3,800 bar, (Pictures in actual condition) - two to four cutting heads - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: Cjlqogvpu Ue Riv Nogt - Z-axes can be moved in relation to each other - Z-axes double guided - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: good (used), Year of construction: 2011, operating hours: 19,286 h, Functionality: fully functional, Information water jet system Make: Waricut / Uhde Type cutting basin: HWE - P3030/1-3D (axes in spindle version) Processing area: 3050mm x 3250mm Type of high pressure pump: HPS4037 - Standard Operating pressure: 400bar - 3800bar Year of construction: 2011 Pump delivery time: 17326h Standby: 1960h Total operating hours: 19286h Cutting basin equipment Waricut: X - axis roller bearing guided linear slide Cjleuzu Evoq Riv Nsgt Y - axis roller bearing guided linear slide Z - axis 1x cutting head 3D version C - axis cutting head rotatable - rotation range +/- 540° B - axis cutting head swiveling - rotation range +/- 90° Height sensing 2D operation Collision monitoring Water basin flooding height 140mm Removable side panels Compressed air and fresh water connection with hose and gun Desludging system with 2x 1200L capacity Equipment HD pump Uhde: 2 plunger intensifiers - max. intensifier pressure 4000 bar Function monitoring Materials maximum material thicknesses Stainless steel 150 mm Steel 150 mm Aluminum 250 mm Non-ferrous metals 150 mm Plastics 150 mm Natural stone/soapstone 150 mm

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, Functionality: fully functional, Intermac Primus 322 waterjet cutting machine for sale. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each 3 axes) Table Celq Rijvpuvgsv Negt External length 3210 mm External width 5410 mm Height adjustment 2150 mm Contains a robust Intermac Primus OS Win 10 Enterprise 2016 control unit and a high pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour with a 1000L tank. The machine has 9710 hours of production (utilization: 12%) The machine has been regularly and properly serviced, for which we have invoices for spare parts. The backup osmosis system (purifier) is also regularly serviced by an authorized service technician/dealer - 2 x per year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €70,000.00 net EXW Cerna Croatia.

Condition: new, Year of construction: 2024, Functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies Cslq Rsu Hz Tqjiv Nsgt + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Year of construction: 2023, Condition: new, OMAX ProtoMAX® waterjet cutting system The smallest industrial waterjet cutting system in the world! Due to its compactness and versatility, the ProtoMAX® waterjet cutting system is perfectly suited for small batch and prototype production as well as teaching applications. It can also be used to complement larger waterjet cutting systems. The small footprint allows it to be used in smaller spaces and mounting on casters makes it easy to relocate. - Very compact complete system Cjlq Rivom Dtgvo Nogt - Integrated high-pressure pump 2,000 bar - Abrasive system - Laptop with CAD/CAM system - Closed measuring system - Practical clamping system - Power connection 230 V - Connected load max. 4 kW - Incl. starter kit Personal Abrasive Waterjet. Price on request

Condition: ready for operation (used), Functionality: fully functional, input voltage: 380 V, total length: 2,100 mm, total width: 1,900 mm, total height: 1,400 mm, type of input current: three-phase, input current: 7 A, outer dimension width: 1,900 mm, outer dimension length: 2,100 mm, plate width: 100 mm, plate length: 140 mm, Screen printing machine fully functional. Screens up to 140x100cm. Incl. 10 screen frames. Instruction manual with construction plan in German available. Csljvndfnsq Riv Negt

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Colqjnab Rze Riv Nsgt We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, Functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) Cjlq Rivsguquco Negt New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!