Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Corner centering from the outside of the window Duolq Rzowh R Tkoi Not Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320

Year of construction: 2019, Condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Dueljux Aqsq Rzi Not Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Condition: used, Year of construction: 2010, User-friendly PC control with optimization program and selectable residual management Universal bead clamping for all glazing beads with the same holding base Motorized adjustment for adaptation to different glazing bead widths Corrections can be made based on profile and/or cutting lengths Adjustable pneumatic saw blade feed Saw blade arranged from above, so that the cut pieces and chips fall freely downwards Feed magazine for 10 (optionally 20) x 2 glazing beads Feed unit with servo motor and magnetic belt Feeding and cutting of 2 glazing beads in pairs at the same time Pneumatic removal to the removal magazine with 10 (optionally 20) x 2 glazing beads Technical data Power (kW) 3.5 Voltage (V) 400 Operating pressure (bar) 7 Compressed air consumption (l/processing) approx. 43 Saw blade diameter (mm) 300 Disc milling cutter diameter (mm) 150 Travel (mm) 2,000 Travel speed (m/min) 30 Working height (mm) 900 Max. profile cross-section (mm) approx. 50 x 50 (holding foot clamp) Min. cutting length (mm) 150 Machine dimensions L x D x H (mm) approx. 9,700 x 3,300 x 1,700 Weight (kg) approx. 2,750 Duolq Rzjv Uxagji Njt

Condition: used, Year of construction: 2006, No. 04356 Crosscut and miter saw GRAULE ZS 85 N-S used, year of construction 2006 Delemhf Ezeq Rzi Neut Saw can be tilted and pivoted 400 volt three-phase brake motor 2.2 kW Saw blade diameter 300 mm Cutting height 85 mm Cutting length 380 mm Material contact shoulder made of steel/aluminium Original GRAULE machine stand HM circular saw blade 300 mm for aluminum and plastics Transport dimensions on pallet approx. 1200 x 800 x 1800 mm LWH Weight approx. 150 kg In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Year of construction: 1992, Condition: used, table load 2000 kg Duelq Rzisvuz Rbs Not swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min total power requirement 4 kW dimensions of the machine ca. 3540 x 2780 x 3310 mm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, spindle speed (max.): 24,000 rpm, travel distance X-axis: 4,175 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle motor power: 8,500 W, ZC 4035 3,5 Axis Aluminum Machining Center - Robust mechanical structure suitable for high speed - Axis speeds with an average of 95 m/d - Profiling length 4175 mm - Machinable profile section size 300 x 300 mm - Number of clamps 6 pieces - Spindle motor 8.5 kW 24,000 rpm - The number of magazine sets is 8 - Ø 200 mm saw- Mitsubishi PLC control unit - Vices positioned by the X-axis - Automatic tool recovery in case of power failure Design - Mechanical structure that can process aluminum and steel profiles at high speed and high quality - Stress relieved cast and welded parts to ensure consistent high speed accuracy - Axis speeds with an average of 95 m/min. - Ability to perform milling, notching, drilling, threading, countersinking, cutting, etc. - Profile machining length 4175 mm - Machinable profile section size 300 x 300 mm - Automatic lubrication system - Coolant spray system Control Panel - Versatile adjustable, ergonomic kiosk - 19'' screen - User-friendly Kaban interface with Windows-based, easily adjustable parametric structure - Compatibility with .NCX extension software - High performance 3 axis Mitsubishi PLC control unit- Optical communication and command increment - Communication via Ethernet- Working with G-Code - Data transfer via USB and COM Port Spindle - 8.5 kW / 24,000 rpm - HSK F63 tool holder - Encoder - Temperature control - Liquid cooling Duolq Rziswfyuxe Njt - Tool cooling Magazine - 8 tool holder capacity - Tool change in up to 8 seconds - Ø 200 mm saw can be attached Profile Supports - Automatic profile support system on both sides - Suitable for working with long profiles Vices - Narrow, designed vices protected against external factors - 6 standard clamps - Vices positioned by the X-axis - Profile sliding comfort on the vise surface with the roller system - Three different clamping forces according to the profile thanks to the pressure regulator Safety - Ability to continue from where it left off in case of power failure with the UPS system - Auto-recovery function that sends the spindle to the safe zone - Working safety with cover and safety barriers Technical Support - Periodic maintenance reminder function - Service support with remote connection

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Djlq Rziewhu Hhj Njut Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Year of construction: 2018, Condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Duolq Rzjuxxxei Not Variable measuring stick 3.0m Support for measuring stops 3.0m

Year of construction: 2007, Condition: good (used), Functionality: fully functional, Machine has always been serviced but now has a software error Dolq Rziovyqkze Nsut

Condition: used, No. 04401 Wing assembly station / Leaf assembly station Federhenn WORKER Used For the fitting- and seal assembly on wood- and plastic window sashes With mesh shelf for material storage Table dimensions 2500 x 1300 mm LW Pneumatic side impact and lowering Pneumatic punch Transport dimensions approx. 3300 x 2000 x 2400 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Dslq Rzievtf E Ts Njut Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Year of construction: 1991, Condition: used, table load 3000 kg swivelling range 360 Grad Dujlsvuz N Doq Rzi Nst vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, For sale is a complete glass bonding machine for components measuring 4m x 3.5m. Dolqewbcy Ae Rzi Nsut See the pictures for more details. The system can be viewed in operation by appointment. Dismantling by the customer. System availability: Immediately

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 403 6274, overall weight: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle 45 degrees Tools used: All milling and cutting tools must meet the DIN EN 847-1 standard and have an appropriate working speed to the speed of the milling cutter motors. Milling cutter: Ø 150x30x3.0 32 teeth Cutting disc: Ø 300x30x2.6 96 teeth GLA 403 USER MANUAL Copyright  by FM ROTOX Sp. z o. o. Page: 14 Processed material: PVC glazing beads: Profile length: min. 200mm (depending on the length bumper) Profile height: min. 5mm max. 50mm Delq Rzewhpp Roi Nsut Profile width: min. 10mm max. 50mm Tool pressure: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2kW Fuse: 16A (slow) Saw motors: 230/400V; 4.0/2.3A 1.1kW; 50Hz; 2860 1/min Pneumatics: Working pressure: 5-6 bar Limit pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min / saw run-up Tip: NW Ø 9mm Permitted temperature during operation: min. 15°C and max. 40°C

Year of construction: 2017, Condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Dujlqoux Ade Rzi Nst Glazing Bead Cutting Saw GLSM-200E

Condition: excellent (used), Functionality: fully functional, 2 - Urban AKS 1200 head welding machine - Welding length max. 3500 mm - Weld bead limit: 2 mm Dslq Rziov Rmm Te Neut - Burn-off: 6 mm - Set of support arms

Condition: used, No. 04392 End milling machine GRAULE AKF 4/200 Used Cutter diameter max. 200 mm Spindle diameter 40 mm Spindle length 75 mm Milling width 350 mm Milling depth 45 mm Profile height 130 mm Motor power 3 kW Machine base frame Machine CE-compliant We received 4 used cutters with the machine, but we cannot guarantee that the cutters will fit. Dujlqjrtrzhj Rzi Not Transport dimensions approx. 1000 x 800 x 1600 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2001, Door hinge drilling unit: with 8 drilling spindles and adjustable drilling depth for simultaneous drilling of the fixing holes for 2-part and 3-part door hinges in blind and leaf frames. Frame and door frame: are precisely adjusted by means of the mitre fence, 2 pressure supports and guide pins on the drilling table and then pneumatically clamped. The stops in the mitre and foot area: are adjustable. Suitable for the following series:Royal S50 N/65N, Royal S55/65/70, Royal- R45, 54w, 64w, 70, and 78w, Iskotherm 74 Duolobpt Ecjq Rzi Nst Weight: 90 kg

Condition: good (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 313880, More detailed information can be found in the photos. This vehicle can be viewed and tested by appointment. Duolq Rzewag Saji Njt

Condition: used, Year of construction: 2008, AUTOMATIC LINE FOR THE PRODUCTION OF PVC WINDOWS COMPOSED OF: DOUBLE CUTTING CENTRE AND COMPLETE PROFILE MACHINING AUTOMATIC UNLOADING SYSTEM IN THE FINISHED PRODUCT WAREHOUSE SUPPLY WAREHOUSE Automatic loader with a useful length of 6500 mm (more optional) Loading capacity of up to 12 profiles (more optional) and 1 profile in operation Profile gripper on 3 CNC servo axes: numerical positioning sev width and height of the profile MACHINING AND SAWING UNIT 3 saw motors - cutting movements on servo-assisted axes - adjustable from the control Possibility of V-cutting - cutting movements on CNC axes, speeds and positions adjustable from the control A high-performance machining unit on 2x3 CNC axes: operations can be performed from top to bottom and from front to back simultaneously and independently The machined profile is automatically removed from the work center and sorted into a compartment or wagon frame, removed according to the welding machine request Duelqswd S Afj Rzi Nst X & Y controlled transport system with servomotors 0-position sliding system

Year of construction: 2021, Condition: as good as new (ex-display), Automatic Double Screw Unit SE5 S With automatic screw feeding Delqjuxyye Rzi Neut Head only bench mount Automatic working operations Depth stop control,...

Year of construction: 2001, Condition: excellent (used), Single-head welding machine for PVC windows Pressta Eisele Apollo • power consumption 1.5kW /220V • max. profile width when welded at an angle of 90°-160 mm Duolq Rzijp At U Eo Not • max. profile height 160 mm • angular welding range from approx. 35° to 180° • pneumatic profile mounting • heating mirror lowered from above • mirror width 300 mm • dimensions (LxBxH) 700x660x1700 mm • weight 190 kg • "CE" safety mark

Condition: used, No. 04338 1-spindle copy router / lock router Rotox KF 451 used The ideal machine for lock processing: Profile cylinder, handle hole and lock case on all aluminum and PVC profiles - Milling of aluminum, PVC and wooden profiles - Machining of complete lock cutouts - Milling through several profile walls Machine number: 451 7535 Technical specifications: 220/380V 6.4/3.7A 1.5kW Sale takes place in the current condition! Transport dimensions approx. 1200 x 1200 x 1600 mm LWH Weight approx. 300 kg In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Technical information, description of condition, year of construction and scope of delivery according to the manufacturer or previous owner, without guarantee Subject to prior sale Djlqsiz Ty Ej Rzi Neut Any warranty is excluded for used machines. The rule is "bought as seen". Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse 73433 Aalen

Condition: good (used), Year of construction: 2001, Functionality: fully functional, A complete welding and plastering line for components up to 3.5 m x 3.5 m is for sale. See photos for more details. Dolq Rziswag Ubo Nout The system will be replaced at the end of July 2025.

Year of construction: 2008, Condition: used, PROFTEQ 4-HEAD WELDING LINE FOR PVC WINDOWS Delqewd Suue Rzi Neut

Year of construction: 2020, Condition: as good as new (ex-display), Glazing & Control Press Delq Rsuxy Eozi Nsut VK-3522 Adjustable height pneumatic 500 mm Clamping height: 2.200 mm, Clamping width: 3.000 mm Pneumatic clamping press beam Clamping pads: 120 mm width L= 3.900 x W= 1.050 x H= 2.500 mm