Used Wood shredder for sale (377)

Condition: like new (used), Year of construction: 2020, operating hours: 622 h, Functionality: fully functional, chipper kubota diesel engine feed 16cm on trailer Folintjvc D Npsm Negb

Condition: new, Year of construction: 2024, Knife four shafts Model: WEIMA, GROSS, UNTHA Folintmot Inzio Nogb Type: ZM30, GZ30, RS30 Year of manufacture 2024 New part / ready for use 1. Knife 8Z-66 2. Knife 4Z-66 Please specify the knife type when ordering.

Condition: used, Functionality: unexamined, Wood shredder for sale Fgoliewcb I Usntm Njb

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Motor 18.5 KW SPS control Folijuwc E Nsntm Nogb Rotor diameter approx. 248 mm Hopper opening approx. 620 x 800 mm Sieve: Standard 30 cutting blades Suction nozzle 160 mm L x W x H approx.: 1732 x 1157 x 1650 mm Machine completely overhauled: -new knives -new counter knives -new gearbox -new slide rails -new paintwork -etc. Further technical data on request

Condition: like new (used), Year of construction: 2023, operating hours: 230 h, Functionality: fully functional, total width: 2,430 mm, total height: 1,735 mm, total length: 2,410 mm, overall weight: 3,500 kg, type of input current: three-phase, input current: 100 A, input voltage: 400 V, type of motor: three-phase motor, power: 37 kW (50.31 HP), motor voltage: 400 V, Equipment: emergency stop, Slow-speed shredding system now available +++Conveyor belt and overhead magnet included+++ >>> mütek shredding system Includes: 2nd row of knives for up to 30% more throughput Fast hydraulics for increased throughput Conveyor belt removal Fgelintsv I Rqqem Nsb Your advantages: + Extremely large cutting unit opening; 1300x1200mm + Special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW starting power Technical specifications: Top feed opening (mm): 1300 x 1200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 20 (retrofittable 10-40mm by the manufacturer) Tools: 37/70 blades Suction nozzle diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. kg): 3500 -- Raw material requirements: - The moisture content (dry) must be below 20% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result. >>> Conveyor Belt L-Shaped Conveyor Belt MRZ Including preparation for conveyor belt removal Horizontal section: 1200 mm Rising section: 2500 mm Discharge height at 60 degrees: approx. 2000 mm Bending angle adjustable from: 0 to 60 degrees Drum diameter: 63 mm Belt width: 400 mm Usable width: 350 mm Cleave spacing: 200 mm Cleave height: 30 mm Lateral guide: aluminum, sealed with belt flaps Feed height: 300 mm Discharge height: 2000 mm Motor: 0.25 kW, 400 V, 50 Hz, 3 ph Conveyor speed: 36 m/s No control unit! >>> Automatic metal separator consisting of: Neodymium overband magnet (Neodymium magnets are among the strongest magnets in the world. They have extreme pulling force and cannot be compared to ferrite magnets) Extremely high separation efficiency of up to 99.4%, depending on the pile height and the feedstock. Arguably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Nails are attracted over a length of 600 mm and ejected to the side, in the non-magnetic area. This overband magnet should be mounted approximately 5 - 9 cm above the material flow. Ideal for separating nails from wood chips. Requirements: * Belt width or internal usable width (of the existing conveyor belt) must be less than 55 cm. * Suitable for separating nails from material flows less than 12 mm high, and chip length less than 25 mm. Control: Manual start-stop A 16 A power supply is required. >>> Includes control link Shredder ON - Conveyor belt ON - Metal separator ON Shredder OFF - Conveyor belt OFF - Metal separator OFF AUTO-OFF when shredder is empty. >>> Platform with stairs made of solid wood, adapted to the machine

Condition: excellent (used), Year of construction: 2022, operating hours: 210 h, Functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, color: silver, axle configuration: 1 axle, maximum load weight: 6,500 kg, The BBT 400 Woodzilla is a 360° swiveling, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical data Year of manufacture: 2022 Operating hours: approx. 210 hours Drive: diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Maximum trunk diameter: 32 cm Length of feed table: 1300 mm Support: 4-way hydraulic Z-crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chipper and crane The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is sold in the condition it was in at the time of handover. The seller assumes no liability for defects We reserve the right to sell, make changes and repairs. This overview is only intended as a source of information and does not constitute a binding offer. We hope that we have aroused your interest. We look forward to hearing from you and are happy to answer any questions you may have. Nothing suitable? Then contact us! +++++ The BBT 400 Woodzilla is a 360° swivelling, compact, powerful, mobile drum chipper with aggressive feed, mounted on a lorry trailer chassis. Technical specifications Drive: Diesel, Deutz TCD 3.6, 100 KW (136 hp), Stage 5 Feed: 320 x 500mm Chipping drum: 400 x 500 mm, 4 knives Log diameter max.: 32 cm Length of infeed table: 1300 mm Support: 4-fold hydraulic Z-crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer drawbar eye: 40 mm Brake: air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chipper and crane The machine is in mint condition. Warranty: The machine will be sold in the condition existing at the time of delivery. The seller does not assume any liability for defects. A review is possible after prior arrangement! Fjlinjuitb Ajtm Njgb

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, Functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Satrind can still be seen working and can be used immediately. power 44 KW is 60 HP Fgslinsu Abkhjtm Neb

Condition: new, Year of construction: 2025, Rotary knife Model: WEIMA, GROSS Type: WL, WLK, GAZ, WT, V Year of manufacture 2024 New part / ready for use CONCAVE reinforced cutting knife hollow ground with extended thread for single-shaft chipper shredder Felintmst Ig Axs Njgb 1. Knife 30x30x16 M12 thread (KR) 2. Knife 30x30x16 M12 thread (K8) Please specify the knife type when ordering.

Condition: refurbished (used), Year of construction: 2000, machine/vehicle number: H1654, Ready for delivery Gearbox replaced, cutting unit completely overhauled, new oils and wear parts Connected load: 22 kW Feed opening: 800 x 1200 mm Rotor working width: 820 mm Rotor diameter: 348 mm Fgjlinsulfclstm Nob Rotor type: G-rotor Blade size: 35 x 35 mm Number of blades: 40 blades Sieve size not yet determined PLC controlled Hydraulic tank size: 20 l

Condition: like new (used), Year of construction: 2012, operating hours: 245 h, Functionality: fully functional, machine/vehicle number: 13026-040, overall weight: 15,000 kg, fuel type: electric, color: blue, CHIPPER IN PERFECT CONDITION, WORKED ONLY 245 HOURS, HAS FULL DOCUMENTATION. IF YOU HAVE QUESTIONS, PLEASE CALL 727011171 Fslintmev Tmyrj Nsgb

Condition: ready for operation (used), Functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 - after technical inspection - very good condition - for technological chips TECHNICAL PARAMETERS: inlet width 400 mm Folinter Ak Rgjm Nsgb inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition power of feeder motor 1,5 kW length of feeder 4200 mm transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Condition: good (used), Rotor 264 mm Feed opening approx. 510 x 815 mm Rotor length approx. 510 mm Motor 15 KW Knife 24 Sieve: Standard Feliouwc Ttsntm Nsgb Technical data on request

Condition: ready for operation (used), Year of construction: 1982, operating hours: 5,000 h, fuel: diesel, I will sell a Klockner colt 1982, good condition, bipods, makes a thick fraction, colt inlet 550×220mm, leyland engine 120hp, low fuel consumption, vibrating plate 400×500cm Felinjv U Eatstm Nogb

Condition: new, Year of construction: 2025, Rotary knife Model: WEIMA, GROSS, KUENY, ZERMA Type: WL, WLK, GAZ, WT, V, KR Year of manufacture 2024 New part / ready for use CONCAVE reinforced cutting knife hollow ground with extended thread for single-shaft chipper shredder 1. Knife 35x35x20 M12 thread (KR) 2. Knife 35x35x20 M12 thread (K8) Fgslintmjt Ihv Ho Nob Please specify the knife type when ordering.

Condition: refurbished (used), Year of construction: 2001, Functionality: limited functionality, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Fgsljtxykfeintm Nsb Second row of knives

Condition: like new (used), ‒ 4 knives ‒ Shock absorber set ‒ Trapezoidal belt set ‒ Motor pulley ‒ 6 m conveyor belt including 1 motor head, 3 elements of 2 m and 1 terminal element Fgslintmsfl Swbs Nsb ‒ Chute for gravity feeding ‒ Piping ‒ Replacement knives ‒ Electrical equipment including 100 HP main motor with slides, starter box, discontactors, button box, cabin presentation

Year of construction: 2011, Condition: excellent (used), JUNKKARI HJ250 chipper Felinoitcupstm Njgb – hydraulic feeder – Finnish production – year of manufacture 2011 TECHNICAL PARAMETERS: hydraulic feeder / number of shafts 2 adjustable feed speed max element diameter 250 mm rotor diameter 900 mm rotor speed 540-1000 rpm roll width 300 number of knives 2 chip size adjustable 5-18 mm capacity 7-20 m3/h power requirement of 90 hp discharge chute rotated 360° knife length 300 mm reverse dimensions (length / width / height) 210 / 170 / 190 cm weight ~ 650 kg

Condition: new, Year of construction: 2025, Knife holder for a single-shaft breaker Model: WEIMA, GROSS Type: WL, WLK, GAZ, WT, V Fjlet Ipa Heintm Negb Year of manufacture - 2024 New/ready to use 1. Mounting bracket 32x32x34 18G2 Knife mounting bracket 35x35x20 M12 Please specify the knife type when ordering

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: H2415, Immediately available with large rotor bearings Connected load: 22 kW Feed opening: 820 x 1200 mm Rotor working width: 820 mm Rotor diameter: 368 mm Rotor type: G-rotor Blade size: 35 x 35 mm Number of blades: 40 blades Sieve size: not yet determined PLC controlled Hydraulic tank size: 20 l Fslintsulfmqsm Nogb Subject to errors and minor changes

Condition: new, Year of construction: 2024, Stationary knife Model: WEIMA, GROSS, GENOX, VECOPLAN Type: WL, WLK, GAZ, WT, V Year of manufacture 2024 Fgelispwfzwentm Nob New part / ready for use Please specify the knife type when ordering.

Condition: used, Shredder UNTHA RS30 SB-450 Number of rotors 4 Grinding chamber 450 x 500 mm Blades 1Z-66, 4Z-66 Motor power 2x5.5 kW 380 V, 50 Hz Sieve holes Ø 30 mm Length/width/height 1250/1250/1970 mm Folinot In H Ejtm Njgb Weight approx. kg 1100

Condition: new, Year of construction: 2025, Knife holder for a single-shaft breaker Folinet Ipa Totm Njgb Model: WEIMA, GROSS Type: WL, WLK, GAZ, WT, V Year of manufacture - 2024 New/ready to use 1. Mounting bracket 37x37x34 18G2 Knife mounting bracket 40x40x25 M12 Please specify the knife type when ordering

Condition: new, Year of construction: 2024, Knife four shafts Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Fgsliopwfxqjntm Njb Year of manufacture 2024 New part / ready for use 1. Knife 1Z-66 2. Knife 2Z-66 Please specify the knife type when ordering.

Year of construction: 2023, Condition: new, Sieves for four-shaft shredders Models: RS, ZM, ZMK, GZ Fgslintmspwfz Ee Nob Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2023 New part / ready for work

Condition: new, Year of construction: 2025, Rotary knife Model: WEIMA, GROSS, GENOX, ZERMA, VECOPLAN Type: WL, WLK, GAZ, WT, V Year of manufacture 2024 New part / ready for use CONCAVE reinforced cutting knife hollow ground with extended thread for single-shaft chipper shredder 1. Knife 40x40x25 M12 thread (KR) 2. Knife 40x40x25 M14 thread (KR) 3. Knife 40x40x25 M12 thread (PC) 4. Knife 40x40x20 M12 thread (KR) 5. Knife 40x40x16 M10 thread (KR) Please specify the knife type when ordering. Felintot Ih Ucsm Njgb