Used wood shredder for sale (295)

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Fpedpszxrxgefx Aanjp Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, For sale BRUKS 803 CS drum chipper type CS 75 KW Fpedpfxoz Up Sns Aanep Capacity, m3 chips/h. : -chipper only 30-60 -as Chip-Pac. 20-40 Drum diameter : 800 mm No. of knives, standard : 4 Infeed opening wxh 540x400 mm

Condition: excellent (used), Year of construction: 1995, I sell the vertical wood shredder Weima ZM30 Made in Germany Year 1995 Cylinder system with 4 sindles Fsdpfx Aajz Hqz Tenopp 2 Motors 11 + 11KW Only 1850 working hours Condition like new. Avialable immediately.

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Fsdpfexr Trnox Aanjpp

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Fpedpfx Aozkg Sfeanop Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Highlights High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Fsdpfxjzwb Uno Aanspp Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM Fjdpfxeyffi Te Aanjpp ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: good (used), PEZZOLATO TM 400 – PROFESSIONAL LOG SPLITTER / WOOD PROCESSING MACHINE For sale: a professional log splitter from PEZZOLATO, model TM 400. This machine is designed for mechanical cutting and splitting of firewood. Its robust, industrial construction makes it ideal for farms, companies involved in firewood production, or wood processing plants. THE MACHINE IS 100% FUNCTIONAL AND READY FOR WORK. In addition, the discharge conveyor is equipped with a NEW BELT. TECHNICAL SPECIFICATIONS: • Manufacturer: PEZZOLATO S.p.A. – Italy • Model: TM 400 • Year of manufacture: 2009 • Machine number: SES3714 • Electrical power supply: 400 V • Electric motor power: 15 kW • Machine weight: approx. 1600 kg • Chainsaw • Maximum cutting diameter: approx. 400 mm • Hydraulic splitting system • Discharge conveyor • NEW discharge conveyor belt • Option for tractor drive via PTO DRIVE: The machine can be powered in two ways: 1. Electric motor – 15 kW / 400 V 2. From a tractor via the PTO shaft – mechanical drive provided by the manufacturer Thanks to the PTO drive option, the machine can also be used in locations where there is no suitable electrical power supply. TECHNICAL CONDITION: The machine is fully functional and ready for further use. The saw, hydraulic system, log splitter, and conveyor are all working correctly. The discharge conveyor belt is NEW. Visually, the machine has normal signs of use and wear. These are signs resulting from the machine's use and age. The machine is used but technically sound and regularly maintained. DOCUMENTATION / NAMEPLATE: PEZZOLATO S.p.A. Model: TM 400 Year of manufacture: 2009 Machine number: SES3714 Electrical cabinet: • 400 V • 50 Hz Fpsdpfx Ajz Awv Eeanep • Nominal current 50 A • IP54 • Year of manufacture 2009 SALE: Sold complete, in the configuration shown in the photos. It is possible to view the machine and test its operation before purchase.

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - blade length 530mm - number of blades 2 pcs - screen dimensions 65x65mm - toothed pulling shaft, bottom - lower shaft motor 2.2kW Fjdpfx Aajzx Rnmonspp - toothed pulling shaft, top - upper shaft motor 2.2kW - belt conveyor - length of conveyor belt 2200mm - width of conveyor belt 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approximately 3000kg ADVANTAGES - German-made - auto-reverse (adjustable) - DTR documentation - used shredder, very good condition Net price: 75900 PLN Net price: 17650 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, Petrol Wood Chipper R1500 The R1500 petrol wood chipper is a powerful and robust branch shredder designed for professional users involved in wood processing and disposal. Equipped with a reliable DUCAR engine with a displacement of 420 cm³ and a power output of 15 HP, it provides high efficiency and durability in both industrial and service applications. The machine allows fast processing of wood material into chips with a size of 20–40 mm, which can be used as fuel, compost material, or garden mulch. Main advantages of the machine High power and performance – the DUCAR OHV petrol engine ensures optimal operating parameters and long service life. Durable construction – the use of a cast iron cylinder sleeve increases wear resistance and improves lubrication. Advanced safety features – automatic ignition cut-off system and emergency safety switch located in the feed hopper. Easy operation and transport – folding feed hopper and large 45 cm diameter wheels make handling and mobility easier. Versatile applications – suitable for shredding both fresh and dry wood of various hardness levels. Design and technology The R1500 wood chipper is equipped with a belt drive system and centrifugal clutch, ensuring smooth and safe power transmission to the cutting drum. The knives are manufactured from Hardox 500 steel, which provides exceptional resistance to abrasion and significantly extends service life while reducing the need for frequent replacement of cutting components. The feed hopper is positioned at an optimal angle to facilitate material loading, while the 360° rotating discharge chute allows precise direction of the chip stream. The self-feeding drum design improves efficiency and minimizes the need for manual material pushing. Precision and working efficiency The 15 HP engine, high drum speed of 2000 rpm, and two cutting knives ensure uniform and efficient branch processing. The chipper can handle: fresh softwood up to 120 mm in diameter, fresh hardwood up to 100 mm in diameter, dry hardwood up to 80 mm in diameter. This allows effective processing of various types of wood while maintaining high-quality chips. Applications The R1500 model is an ideal solution for companies involved in landscaping, agricultural farms, municipal services, and businesses processing wood waste. It is also suitable for sawmills and biomass production companies. The produced wood chips can be used in heating systems, as compost material, or as garden mulch. Fedpfjvxtd Uox Aanopp Standard equipment DUCAR petrol engine 420 cm³ / 15 HP Hardox 500 steel cutting knives Belt drive system Feed hopper with folding extension 360° rotating discharge chute Safety system with ignition cut-off Technical specifications Parameter Specification Drive system V-belts, centrifugal clutch Engine 15 HP, 420 cm³ Maximum cutting diameter (fresh softwood) 120 mm Maximum cutting diameter (fresh hardwood) 100 mm Maximum cutting diameter (dry hardwood) 80 mm Number of drum knives 2 Knife type Hardox 500 steel Material feeding Self-feeding drum Dimensions (L × W × H) 180 × 82 × 130 cm Feed hopper dimensions 57 × 52 cm Discharge chute rotation 360° Discharge chute height 130 cm Wheel diameter 45 cm Drum speed 2000 rpm Chipper weight 230 kg

Condition: used, Second-hand DHB wood chippers, Type 600, for the professional chipping of wood and other materials. The machine is fitted with a 20 mm screen, an 18.5 kW motor and a 600 mm long rotor. Technical data: - Screen: 20 mm Fpjdpfx Aaozwl S Djnep - Motor: 18.5 kW - Rotor length: 600 mm

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Fjdpfot Tvk Asx Aanjpp Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW Fpedpfx Aasqy Ek Hsnep - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: used, functionality: fully functional, overall weight: 1,700 kg, fuel type: electric, - Swiss made TECHNICAL SPECIFICATIONS: Fodpfx Ao Aa Nyueanjpp - feed hopper opening: 730 x 860 mm - rotor diameter: 300 mm - rotor length: 730 mm - main motor power: 15 kW - number of knives: 19 pcs - rotating cutting knives: 40 x 60 mm - screen: φ 25 and 20 mm - AUTO REVERSE - HYDRAULIC CHUTE - height of the compression chute: 150 mm - dimensions (L/W/H): 160 x 160 x 160 cm - weight: ~ 1700 kg

Condition: excellent (used), Catalog number: 8140 TECHNICAL DATA - inlet width: 350mm Fpodpe Ahm Ifsfx Aansp - inlet height: 120mm - shaft width: 370mm - shaft diameter: 420mm - blade length: 350mm - number of blades: 3 pcs - screen: 40x40mm - toothed drag shaft (bottom) - lower shaft motor: 1.5kW - toothed drag shaft (top) - upper shaft motor: 1.5kW - main motor: 37kW - auto-reverse - capacity: approximately 12 m3/h - conveyor belt: 3000x350mm - conveyor belt dimensions: 3150x610x1230mm - length/width/height - dimensions: 2200x1000x1800mm - weight: approximately 1500kg ADVANTAGES - manufactured in Poland - 3000mm conveyor belt – auto-reverse - used machine – very good condition Net price: 62900 PLN Net price: 14628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Fedpfxezq Sqgs Aanspp Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - roller width 450mm - roller diameter 550mm - number of knives 2 pcs Fpjdozx S Dcspfx Aanep - pulling roller, toothed on top and bottom 2 × 2.2kW - additionally, a toothed pulling roller at the bottom, in front of the pulling roller - electric auto-reverse (with adjustable setting) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor length/width/height 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 17884 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below Fpedpfx Aaop H Sv Donep

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt Fpedpfsful Uiex Aansp - 2.000 mm discharge conveyor belt

Condition: excellent (used), Catalog number: 7672 Fodpfozxhfcjx Aanjpp TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Screen: 20mm - Pressure plate - Electric auto-reversing - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reversing - Pressure plate - Very good condition - Used wood chipper Net price: 85,900 PLN Net price: 19,977 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8089 TECHNICAL DATA Fjdpfx Asz Eaypjanspp - Inlet width: 400mm - Inlet height: 170mm - Shaft width: 430mm - Number of knives on the shaft: 4 pcs - Feed rollers, toothed, top and bottom: 2 x 1.73kW - Screen: 25x25mm - Automatic reversing with adjustable settings - Vibrating conveyor: 1.5kW - Length of vibrating conveyor: 3250mm - Width of vibrating conveyor: 380mm - Main motor: 45kW - Overall dimensions of vibrating conveyor: 3250x750x1100mm - Overall dimensions of shredder (length/width/height): 2400x1400x1400mm - Total weight: approximately 3000kg ADVANTAGES – Vibrating feeding table – Automatic reversing with adjustable settings – Shaft with 4 knives – Produced by the Polish brand OSKA – DTR + CE documentation – Unpainted – Used shredder, very good condition Net price: 96900 PLN Net price: 22535 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, power: 30 kW (40.79 HP), Wood chipper Fpjdezha S Tepfx Aansp Manufacturer: Fransson Model: TNM – 45 Electric motor: 30kW Drive motors: 2×0.75 kW Complete with vibrating conveyor: length – 8.5 m Electrical cabinet

Condition: excellent (used), CATALOGUE NUMBER 7725 TECHNICAL DATA - Inlet of the loading hopper: 1200x1000mm - Outlet for shredded wood: ø 200mm - Rotor working width: 980mm - Main engine: 22kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Sieve: 16/11mm - Presser drawer - Electric auto-reverse Fjdpfx Aae Af Ux Henepp - Dimensions (L/W/H): 2600x2000x1720mm - Weight: 2125kg ADVANTAGES - German-made - Auto-reverse - Presser drawer - Very good condition - Used wood chipper Net price: 95,900 PLN Net price: 22,300 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with larger exchange rate fluctuations)

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Technical data V - Rotor Motor 18.5 kW Fedpfx Aajzu Ap Uenspp 400 V, 49 A, 90 rpm Feed opening 800x600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Fsdsw I R Rnepfx Aanspp Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production