Multiblade

A.Costa LINCE 5/25

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Fjdpfx Ahewvq E Ajpegd

Year of construction: 2012, condition: excellent (used), WEINIG window production line consists of: Unirex 3000 machining center Univar 15 Fgedoh H Iyxjpfx Ahpod Unitex 15

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top Fgsdpfx Ajxpi Duohped ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Fedpfxjv A Htqs Ahpegd Weight 1950 kg Total power requirement 13,5 / 17,5 kW kw

Condition: used, GRAULE AGT pull and table circular saw Fsdpfsxf Tr Uox Ahpegd

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm Fgedpfxjr A H R Te Ahpsd -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Fgsdpfx Asdy Hm Eshpjd Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Dust extraction outlet 100mm Working height of table 900mm 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep.

Condition: not inspected (used), Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm Fedpfox H Al Nsx Ahpogd 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: excellent (used), DMC Topsand 2000 Calibrating and Sanding Machine 4 Belts First group: 1 roller Fedpfx Aoi Dakrshpogd Second group: 1 roller Third group: 1 electronically controlled sectional pad Fourth group: 1 electronically controlled sectional pad for superfine finishing Usable width: 1350 Vacuum system on the belt

Condition: used, Technical data: Fgjderi Si Dspfx Ahpsd Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm