FLAT GRINDING MACHINE

ABA FFK

Condition: good (used), Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm Nlsdpfx Aksikgdmeced -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Nedpfoyw Tddjx Akcold Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Technical data: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Disc speed: 1450 rpm Nlsdjiba R Njpfx Akcod - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Condition: used, Pot grinding machine Manufacturer: Gustav Brueckner Type: FSH 1 Maximum distance: Table - Grinding wheel 200 mm Table surface: 315 x 135 mm Nlsdpfxjcv Tb De Akcsd 380 Volt 0.75 kW 1.85 Amperes Space requirement: W 650 x D 600 x H 1600 mm

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 Nlsdpjuhpiyjfx Akcsd - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: good (used), Bar feeder LNS Njdjr Iygijpfx Akcsld

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 Nedpfxsqpl Uuj Akceld total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Nljdpfex S Rcmox Akcjd

Condition: good (used), Year of construction: 1988, 1 x oil-flooded single bar feeder LNS Hydrobar 6.60 HS-4,4 Year of manufacture: 1988 In good condition. Technical data: Diameter: 28/36/44/52/58/63 mm Bar length: 3,100 mm Accessories: Machine feet The feeder can be inspected at our warehouse in Reichenbach. Nledpsvawtpefx Akcjd

Year of construction: 1985, condition: used, 1 used engraving machine Manufacturer: KUHLMANN Type: GM I-I Working area: 320 x 200 x 280 Stencil table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving attachment TGV plate engraving attachment Various stencils and type sets Various engraving tools Speed range: 4,200 – 20,000 rpm Space requirement: approx. 1.2 x 1 x 1.5 m Nlsdpfx Aok Tt Axokcsd Weight: approx. 250 kg