Vise

ALLMATIC TC 125

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Controlled by Siemens Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm Including the following accessories: Sliding guard 12-position turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Various tool holders VDI 40 Various sets of top jaws Various turning tools Signal lamp, 4-color Tailstock with quill Chip conveyor with coolant tank Bjdpfezd Dczjx Abuodi 4 machine feet Operating manuals

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Bdodpfxjv Iq Eze Abuei Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Bdjdpfx Aex D Igdobuei Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Bedpfxsw U Aahj Abujdi Spindle speeds 63 – 3150 rpm Fixed table

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Bdsdpfjvzkzcjx Abuji Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission With fully encapsulated spindle Jaw width: 160 mm Max. clamping force: 50 kN Bjdpfx Ajw Skgdjbuodi Max. clamping range: 436 mm Overall length: 594 mm Overall height: 115 mm

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Bedow Urirepfx Abujdi

Condition: used, Year of construction: 2004, turning diameter 190 mm turning length 620 mm control Fanuc 18 iT max. bar diameter through the spindel 65 mm number of controlled axis 9 y-axis +/- 45 mm turning speed range 4500 U/min power capacity 15/11 kW swivelling range +/- 91 ° Grad number of tapers in turret head 12/24 + 12/24 number of driven tools in turret 2x 12 Spindel speed of driven tools 6000 U/min Spindelpower on driven tool 5,5/3,7 kW tail stock Gegenspindel/ sub spindle sup spindle 5000 U/min 11/7,5 kw weight of the machine ca. 12,5 t CNC- lathe with sub spindle - 2 turrets, universal for main.- or sub- spindle - upper turret switchable - Y- axis on upper turret - both turrets with 12/24 positions - collet chucks on main- and sub spindle - chip conveyor - parts catcher typ A Bdedpfx Aez Euunsbuji - few toolings

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details. Table • Outer length: 1200 mm • Outer width: 540 mm • Full Load Current: 55.31 A • Interrupting Capacity: 5 kA Bdsdpfx Abjzzw Hnjusi • Short Circuit Withstand: 10 kA • Carousel/disc-type automatic tool changer • 30-position tool magazine loaded with tooling • Top-mounted mist extraction / air filtration unit (POSMA) • Machine status light tower

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Bdedpfx Asz Nxcxobuji Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.