Circular sawing machines

Altendorf F45

Condition: used, Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 105 mm, cutting width (max.): 1,250 mm, saw blade diameter: 350 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,600 mm, overall weight: 800 kg, Equipment: scorer, No. 04510 Sliding table saw Altendorf F 45 Used, year of construction 1990 Isdpfx Amsy A Npgs Ejtf Sliding table length 3200 mm Maximum cutting height 105 mm Maximum saw blade diameter 350 mm Cutting width 1250 mm Main motor 5.5 kW Speeds 3000 / 4000 / 5000 / 6000 rpm Scoring unit Hydraulic saw blade tilt Hydraulic cutting height adjustment New hydraulic cylinder for cutting height adjustment (365,- € excl. VAT) Main saw motor brake defective Transport dimensions approx. 3300 x 2000 x 1600 mm LWH Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex warehouse

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN Itsdpfx Amevu E R Se Eof feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, featuring 2-axis scoring unit, 3m table, and Control-Plus control system Sliding table length 3000mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm, with electronic speed display Drive motor 5.5kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain dimensions and grooves using both rip fence and crosscut fence Cut width correction at rip fence and crosscut fence when the saw blade is tilted 600 cutting programs Calculator function with direct result transfer to the respective axis Tool management Saw blade diameter up to 450mm Max. cutting height 150mm Cutting width electrically adjustable up to 1040mm Tilting angle and height adjustment electrically adjustable Crosscut stop rail electrically adjustable up to approx. 3210mm, with automatic coupling of second stop flap for large cutting sizes Rip fence foldable Extraction nozzles 120 + 80mm Sliding carriage can be locked Additional angle stop rail 2 used saw blades and a scorer included 2 riving knives 2-axis scoring unit, can be adjusted electrically while the machine is running 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of use. No cuts in the sliding table. Original paint (special color), touched up in parts. Machine has 18,985 operating hours. Comes from a furniture factory and was clearly regularly maintained and well cared for. Condition as shown in the original photos. A video of the machine in operation can be provided upon request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse—see “more offers from this seller.” Iodpfx Amsxw Ii So Ejtf

Condition: used, Year of construction: 1979, sliding table length: 3200 mm cutting width at the fence: 1250 mm cutting width at the cross cut: 2800 mm cutting depth: 120 mm scoring unit: no height adjustment sawblade: Handrad tilting adjustment sawblade: Handrad adjustment fence: manuell readout sawblade tilting: Scala read out sawblade height: - read out fence: Scala read out crosscut stop: Scala sawblade diameter: 450mm number of speeds: 4 motor power: 5,5kW motor brake: no suction connection: 80mm und 120mm machine length: 3200mm Itodpfx Amey A Hiwo Eof machine width: 1900mm weight: 1000kg

Condition: used, Cutter Manufacturer: Seydelmann Model: K 204 Ultra Isdpfstu I T Ejx Am Eotf Made of stainless steel Volume: 200 liters 2 knife speeds 2 bowl speeds 2 mixing speeds Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz

Condition: used, Year of construction: 1996, Sliding carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Iodpsyq Rz Sofx Am Eotf Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut rule display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Itjdpfxoy Ai I Nj Am Ejf Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: new, Year of construction: 2026, CIDAN Machinery manufactures coil handling slit and cut-to-length lines that can be programmed and operated by skilled and non-skilled users alike. Our cut-to-length machines are all-in-one units built to withstand high-level production over the course of time while taking up as little space as possible. CIDAN Machinery provides many of their cutting-edge features as standard – straightening units, sheet guide for in-feeds, guillotine shears with hold down beam and double-edged blades, feeding units, foot pedals for remote feeding, and many more. In order to provide the absolute best technological options from around the globe, CIDAN Machinery has partnered Forstner Machinery, a world-wide leader in slit and cut-to-length machines Since 1960, Forstner has been developing and manufacturing machines for professional coil processing. Our partnership has provided us the opportunity to bring all of their best machines to you! Isdpfemfrgrjx Am Estf - Sheet metal on coils saves money, reduces waste and frees up storage space. - We have the right solution for all levels of production. - Free up floor space with coil processing and increase your productivity and your profits. - The extensive range of Forstner products can be combined to make an efficient production facility based on your requirements, where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. - With our solutions you can easily process coils from 500 kilos up to 8 tons. Bigger coils mean fewer changeovers, less waste and a more efficient process. - How many different materials do you need readily accessible? Frequent changeovers? With a coil selector you keep eight different materials ready at the cut-to-length for far quicker changeovers. - With a well equipped cut-to-length in your production facility you will no longer need to cut strips in guillotine shears. - Do you sell sheets or do you want to recoil material in smaller coils? We have the right solution for you! - Rational coil handling cuts your lead times, frees up production space and reduces tied up capital in stocks.

Condition: like new (used), Altendorf F45 panel saw, like new Sliding table 300 cm, Motorized adjustment of blade tilt and up/down movement, Right-side fence motorized, adjustable up to 1340 mm, 2-axis scoring unit, electrically adjustable, Main motor 5.5 kW; 3 cutting speeds, Maximum blade diameter 450 mm, Electronic readout for fence on sliding table, DIGIT-L, Year of manufacture: 2026, Ijdpfx Aoy Dt S Uem Ejtf Ex-demonstration machine, condition like new.

Condition: excellent (used), Year of construction: 2003, A fine Altendorf F45 CE is available for sale. The machine will be available from June/July. Iedpfxey A Rius Am Estf About the machine: Year of manufacture: 2003 Max. saw blade diameter: 450mm Sliding table: 300cm Scorer Electric adjustment of the saw blade Currently, the scorer unfortunately no longer lifts at startup.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Itodpfx Amjuthz Te Ejf Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, cutting width (max.): 800 mm, saw blade bore: 30 mm, actuation type: manual, total length: 2,800 mm, Equipment: saw blade guard, Panel Saw / Table Saw / Circular Saw / Joiner's Saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1978 Sliding table length: 280 cm Ripping width/Parallel fence approx.: 80 cm Parallelogram safety guard with top-mounted extraction hood Extension table with crosscut fence Miter fence Motor power: 5.5 kW Condition: see pictures and please pay attention to the item description. Parts can also be picked up by the buyer. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. Articles can be picked up by the buyer or shipping can be arranged at the buyer's expense. The stated shipping costs are a guideline price; they may vary depending on distance and unloading possibilities. Please inquire. The offered item is subject to differential taxation. The indicated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG. Warranty basis: Due to wear and tear on used parts, the items are fundamentally sold as defective – for spare parts only and only to commercial buyers. By placing a bid, the buyer accepts this as the basis of the sales contract. Iedsy Aht Depfx Am Eotf If the offered item is a used article, warranty is 12 months when the buyer is a consumer in terms of §13 BGB. If the buyer is a business customer in terms of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months for consumers according to §13 BGB. For business customers (§14 BGB), the warranty is 12 months. Notice regarding the online dispute resolution (ODR) platform.

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, Weight: 1.250 kg - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Cutting height, Scoring unit height - Options: Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) Itjdpfx Amjyazbbj Eef - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Iodpfjd H Hhzox Am Eetf

Condition: good (used), Year of construction: 1987, functionality: fully functional, 45° tiltable, hydraulic lifting, lowering and swiveling, 1000 mm to the right of the blade, scoring unit, cutting length 3200 mm, upper extraction, 5.5 kW Price ex location Iedpfeyaq Nbox Am Eetf Transport possible at extra cost!