Sliding table saw

Altendorf F45

Condition: excellent (used), Year of construction: 1998, Swiveling panel saw F45 by Altendorf with 2-axis pre-scoring device in excellent condition Gjdpfx Ae Akh Abekhoui Sliding table length 3200mm Virtually no cuts or major scratches on the sliding carriage Saw blade swivel from 0 to 45.5 degrees Speeds 3000, 4000, 5000 and 6000 rpm with electric speed indicator Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 350mm, 400mm possible without the pre-scoring blade Cutting height max. 125mm Cutting width up to 1050mm Swivel angle and height adjustment hydraulically adjustable Rip fence up to approx. 3200mm Miter fence adjustable up to 45 degrees Width fence foldable Dust extraction port 80 + 120mm, combined into 160mm Sliding carriage lockable (BOLT), allowing large panels to be placed on it Handle Rip fence shoe 1 used plastic saw blade with 2-axis pre-scoring device 3 riving knives 2-axis pre-scoring unit, electrically adjustable in side and height 2 safety guards 2 emergency stop switches Operating manual CE marking 2 V-belts and 2 grease dispensers renewed Very well-maintained machine with minor signs of wear on the anodized sliding table. Original paint, only touched up in places. Excellent condition as can be seen in the original photos; unfortunately, there is no operating hour counter installed, but the saw has not been used much. Dimensions approx. 3400 x 3100 x 1450mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier".

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Gusdjytp Hropfx Akhji

Condition: used, Year of construction: 1996, Slide length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut scale display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Gedpfxe Ai Em Es Akhsui Weight: 1200 kg

Condition: used, Year of construction: 2008, Slider length: 3000 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 170 mm Guedps Ai Em Nofx Akhoi Scoring saw: no Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) Gedpfszv Tibex Akhoui - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 1991, Altendorf F45 panel saw with a reinforced motor and spray system Used Altendorf F45 panel saw with a reinforced motor for sawing non-ferrous metals and a spray system. Guedpe Aibipjfx Akhei Manufacturer: Wilhelm Altendorf Model: F45 Machine type: Panel saw Year of manufacture: 1991 Cutting length: 3,000 mm Motor: Reinforced saw motor for processing non-ferrous metals Sliding table: Aluminum format sliding table Parallel stop: Available Cross stop: Available Spray system: For lubrication and cooling during sawing Spray system operation: Via amber switch Operation: Manual Condition: Used

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tilt adjustment saw blade: 45 °, rotational speed (max.): 4,000 rpm, Fully functional machine from a model-making business. In good condition. Gusdpfx Ae Akdltokhei Machine is available from week 51/2026.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Gusdpfx Aex Ebzdjkhsi Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, Year of construction: 1985, power: 5.5 kW (7.48 HP), Table saw, panel saw, Altendorf F45 Year of manufacture: 1985 Gjds Akb Dbspfx Akheui From an insolvency liquidation, therefore no further technical data available. Please submit a bid. Location: Freising Inspection possible. Sale to the highest bidder. We have other used machines available. Please contact us.

Condition: repair required (used), Year of construction: 1993, Equipment: saw blade guard, scorer, For sale is a robust Altendorf F-45 panel saw from our carpentry workshop. Thanks to the long sliding table and the scoring unit, the machine offers an excellent basis for refurbishment or as a source of spare parts. Technical data & equipment: Machine no.: 93-1-53 (year of manufacture 1993) Sliding table length: 320 cm (double-roller carriage) Additional unit: Scoring unit available (was rarely used by us) Convenience: Automatic height and depth adjustment of the saw blade works well. Accessories: Stops and extraction system, see separate photos. Known defects (sold expressly as defective): The main motor no longer provides sufficient power (probably winding damage or bearing defect). Godpj Ai S A Refx Akhoui The automatic tilting of the saw blade occasionally jams at approximately 25° tilt (needs to be cleaned or mechanically inspected). The machine was well-used and is being offered expressly as a repair-required DIY project / for export / for spare parts recovery due to the described defects. Collection & loading: Self-collection only in 41334 Nettetal. Loading assistance available: A forklift is on site, and we can load the machine onto your truck or suitable trailer free of charge during collection. The sale is made with the exclusion of any warranty, guarantee and liability for defects. No returns.

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Gedpjz Hb Nbsfx Akhsui

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Blade carriage length: 3800 mm Cutting width: approx. 1,300 mm Saw blade diameter: 350 mm Saw blade tilt: up to 45° Guedo Ah R Ihopfx Akhei Cutting speed: 3,000 - 4,000 - 5,000 and 6,000 rpm Blade motor power: 5.5 kW

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max diameter of the main saw blade with scoring saw: 350mm - max diameter of the main saw blade without scoring saw: 450mm - cutting height with a 350mm blade installed: 100mm - electric adjustment of the main saw blade (up/down) + angle - electric angle display - electric adjustment of the scoring saw (up/down, left/right) - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with fence: 1300mm - with a side carriage - with a scoring saw - max diameter of the scoring saw: 120mm - spindle diameter: 22mm - scoring saw motor: 0.75kW - main motor: 5.5kW - 4 types of rotation speeds - electronic speed display - diameter of the dust extraction port: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES Gedo Af I D Ajpfx Akheui - electric adjustment of the saw blade and scoring saw - with original fence - carriage length: 3400mm - German-made - unpainted - used saw, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Gedpfx Akszwqdxehjui Features and Technical Specifications: - Working/planing width: 520 mm - Max. thickness planer passage height: 240 mm - Total length of the planing tables: 2,200 mm - 4-blade TERSA planing spindle - Planing spindle diameter: 120 mm - Planing stop swivels up to 45° - Solid cast iron planing tables - Feed speed: up to approx. 17 m/min - Thickness planer table with height adjustment - Integrated exhaust hood

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Gusdpfx Akoyl Tihehji Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg