Milling-Boring machine HVM-6000

Anayak ANAYAK HVM-6000

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels Nwedpjw Rrb Hefx Abuen - Oil cooler - Technical documentation

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm Nwsdpfxou Nc Rij Abuen z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Nwodothuzpspfx Abuon - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Saw wheel diameters 700mm Nsdpfx Asvyp I Sebuewn Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Nwjdjyr Dmdepfx Abuon Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Nwjdewzyp Uopfx Abuon Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: new, AVAILABLE FOR PURCHASE OR RENT Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your complete contact details, including a valid phone number and email address, so that we can prepare a quotation. Fiber Laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Motorized Z-axis, height: 700 mm Repeatability/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply: 240 V/50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Nodpfxsru E Sve Abuswn Includes software and PC Can be inspected on-site while powered Price net, plus VAT

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Service Agent (Celeos) Nwsdpj Aaz Nnefx Abujn Messenger (Celos)

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure Nedpfxezix Rws Abuown - CE marking

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Nwedpjzc D Enefx Abuen Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm