Profile roller

AYEL-TECH PK 40 230V

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 44 h, load capacity: 4,500 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Kjdpfjw Eqc Hjx Am Esdk Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 ICARUS 45.17 DYNAMIC ST.V IT 1 ST ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval 20 KM/H (only for Germany) - Automatic 45% locking differential on the second axle Hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Open center system Wheel set#400/70-24#Power CL Michelin with mudguards Fixed Dieci equipment carrier plate Boom swing damping (Not compatible with basket pre-equipment) Standard heating Air suspension seat Indicator light correct steering Set car radio preparation Cab comfort kit (sunshade ,rear storage net, dual USB port) Standard rear view mirror right and left FNR lever under the steering wheel - Rear view camera, integrated in the machine's display. LED headlights on boom head Two rear swivel LED work lights on cab LED work lights (1 on the right side, 1 on the left side, 1 at the rear) Road headlights (front) with LED daytime running lights. Rear-view mirror 7-pin trailer socket. Pair of floating forks 120 x 50 mm, L = 1200. 5.0 t load capacity

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker Kdjdpetrd Hfefx Am Eek

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Kdjdpjt Hg Huofx Am Eek Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Ksdpfx Ajxtwxbem Eedk

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Kdjdpeirax Usfx Am Esk -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine Kjdpfxed S Uf Ss Am Esdk KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm Kjdpfju Sbpvex Am Eedk saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Dimensions: 1,950 x 1,650 x 1,000 mm Kdsdpfxou Ekw Ns Am Esk Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min.

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives Kedohuthyspfx Am Eodk immediately ready for use

Condition: excellent (used), functionality: fully functional, power: 26.2 kW (35.62 HP), fuel type: diesel, fuel tank capacity: 35 l, color: bronze, overall weight: 2,700 kg, lifting power: 1,500 kg/m, lifting height: 4,300 mm, tire size: 10.0/75-15.3, tire condition: 90 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, Year of construction: 2023, operating hours: 151 h, Equipment: additional headlights, all wheel drive, cabin, low noise, pallet forks, traction control, === KEY SPECIFICATIONS === Year of manufacture: 2023 Hours: 151 h Max. lifting capacity: 1,500 kg Max. lifting height: 4.30 m Max. reach: 2.62 m Drive: Diesel Transmission: Automatic (hydrostatic) Four-wheel drive: Yes Steering modes: Front-wheel / All-wheel / Crab steering Stabilisers: No Cabin: Enclosed (ROPS/FOPS level 1) Heated cabin: No Fork length: Standard forks Kdedeyhar Iopfx Am Eok Tyres: Rough terrain tyres (CAMSO MPT 552 – 10.0/75-15.3) Engine manufacturer: Yanmar 3TNV88C-DMU Emission class: Stage V (Tier 4 final) Weight: Shipping mass 2,700 kg (min.) CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.