Roller coating machine

BÜRKLE SLC 1300

Condition: good (used), Working height: 870 mm Working width: 1300 mm Workpiece thickness / pass-through height: 3-120 mm Minimum workpiece length: 350 mm 1 rubber-coated applicator roller: 238 mm diameter, rubber coating 5 By 1 Peripheral speed: 6-30 m/min 1 chrome-plated dosing roller: 174 mm diameter Peripheral speed: 1-7 m/min 1 rubber-coated counter roller: 186 mm diameter Nodpfxjyah Tqo Anfowf Feed rate: 6-30 m/min Electrical equipment: Operating voltage 400 V, 50 Hz Total connected load: 2 kW Motors and switching devices in explosion-proof design on the machine. Non-ex explosion protection control in a separate switch cabinet for installation outside the hazardous area of the machine. Additional features: Motorized height adjustment via pushbutton on control panel Reversing switch for dosing roller Cleaning circuit for dosing roller Operator side: left Machine length: 800 mm Maximum machine width (without control cabinet): 2870 mm Weight: 1450 kg

Condition: good (used), Year of construction: 1984, BIG Sale!! Nodjd Da Nnepfx Anfswf Woodchip boiler, Mawera FU300 R, Full automatic working, with screw conveyor, ash removal filter, fan, steering, documentation, etc. Visit: anytime possible in Hungary. Already dismountled!

Condition: excellent (used), Year of construction: 2004, I sell the 1-cylinder roller coater BURKLE SLC1300. Year 2004 Working width 1300mm Very good condition. Fully working. Available immediately. Nwedswun Hbepfx Anfef

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation Nwsdpfsv Hn N Ujx Anfof - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Njdpsi A Ix Hefx Anfswf

Condition: good (used), The machine has been overhauled many new parts new cables Nwedpfxsv Ihdzs Anfjf new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller Nwedpfx Aeuyky Tsnfef - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm Nwsdpfx Ajtrl R Ajnfof 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: used, Year of construction: 2001, Technical description: Operating side: right working height: 900 mm, adjustable: +/- 50mm Nominal width: 1.400 mm Eff. working width: Nominal width - 100 mm Transport Glaet roller Material workpiece: wood, wooden material, inflexible Dimensions (min.) thickness - width - length: 5 - 50 - 300mm Dimensions (max.) thickness - width - length 80 - 1300 - 2000mm Tolerance max. over roller width +/- 0,2mm Total connected load: approx. 1,5 kW Mains voltage: 400 V / 50 Hz with loadable N-conductor Nwsdpfxsbwc Dvj Anfof Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar, max. 8 bar Weight: approx. 1.300 kg Machine without switch cabinet, because integrated in machine line!

Condition: used, Complete sawing line IDC000103 1. SAW group Soderhamn Eriksson 240-12 ARI Vislanda KS12.2 2. SAW group Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 Nwsdpfsu E Hu Djx Anfjf 3. ARI Vislanda KT5A-230 Speed up to 60 m/min.