Wide belt sander

BÜTFERING AWS-E-1100

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 Iisdpfx Ameyt Nvye Eea TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges Iedpfx Amswka S Ie Esia - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. Iiedpsx Aktwsfx Am Eja - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Iiedpfx Amot A A Aqj Eoa

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Iodpfsn Tntqex Am Eeia

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Iodpfx Amsh E Sghj Eeia drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Iedpfsufgnzsx Am Eeia Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM Iiodpfx Amotqd Nds Eja ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact Iiedpfx Asxnbctom Eoa For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table Iiedpfsu Agh Sjx Am Eja 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location